Re: Problems syncing calendar and addressbook with Treo 680

On Fri, Nov 20, 2009 at 11:29 AM, Matt Davey <[email protected]> wrote:
> On Fri, 2009-11-20 at 09:12 -0600, Chris Payne wrote:
>> gpilotd-Message: Base AddressDB is to be ignored by sync
>> gpilotd-Message: Base DatebookDB is to be ignored by sync
> (among others)
>
> This is surprising. =A0Have you marked these applications on your Treo as
> "not for backup"? =A0Have a dig. =A0These messages suggest the PDA databa=
ses
> are marked as to be ignored (i.e. PDA-side, not desktop-side). =A0Note
> that the memo DB is not showing this message.

Well, using FileZ I poked around to see what was set for backup or not
(is there  a better way to find this out on the Palm?). According to
it, both the MemoDb and the DatebookDb have the backup bit un-set,
which I read as "do not backup". I toggled the backup bit to on for
DatebookDb but there was no change.

Just to prove I was not fooling myself through all the iterations, I
enabled the Memo conduit (still not set for backup on the Palm) and
the successful sync output is included below.

Not sure what to do next, but thanks for the help.

Cheers
Chris


gpilotd-Message: gnome-pilot 2.0.17 starting...
gpilotd-Message: compiled for pilot-link version 0.12.3
gpilotd-Message: compiled with [VFS] [USB] [IrDA] [Network] [Bluetooth]
gpilotd-Message: Activating CORBA server
gpilotd-Message: bonobo_activation_active_server_register =3D 0
gpilotd-Message: Watching Treo680 (usb:)
gpilotd-Message: Client seems ok
gpilotd-Message: Client seems ok
gpilotd-Message: monitor_on(pilot_name=3D"Treo680",client_id =3D
IOR:010000001b000000...)
gpilotd-Message: corba:
notify_on(event_type=3DCONNECT,callback=3DIOR:010000001b000000...)
gpilotd-Message: corba:
notify_on(event_type=3DDISCONNECT,callback=3DIOR:010000001b000000...)
gpilotd-Message: Shutting down devices
gpilotd-Message: Rereading configuration...
gpilotd-Message: Watching Treo680 (usb:)
gpilotd-Message: Shutting down devices
gpilotd-Message: Rereading configuration...
gpilotd-Message: Watching Treo680 (usb:)
gpilotd-Message: Found 4766, 0001
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0502, 0736
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 091e, 0004
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 115e, f100
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 082d, 0100
gpilotd-Message: Using net FALSE
gpilotd-Message: Found 082d, 0200
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 082d, 0300
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0c88, 0021
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0830, 0001
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0830, 0002
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0830, 0003
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0830, 0020
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0830, 0031
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0830, 0040
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0830, 0050
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0830, 0060
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0830, 0061
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0830, 0070
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0830, 0080
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 04e8, 8001
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 04e8, 6601
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 054c, 0038
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 054c, 0066
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 054c, 0095
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 054c, 009a
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 054c, 00c9
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 054c, 00da
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 054c, 00e9
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 054c, 0144
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 054c, 0169
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 12ef, 0100
gpilotd-Message: Using net TRUE
gpilotd-Message: setting PILOTRATE=3D57600

(gpilotd:19801): gpilotd-WARNING **: An error occurred while getting
the PDA's system data

(gpilotd:19801): gpilotd-WARNING **: error -201 from pi_close.
gpilotd-Message: setting PILOTRATE=3D57600
gpilotd-Message: Device Treo680 has 0 events
gpilotd-Message: corba: orbed_notify_user, notifications->connect.size
=3D 1, id =3D Treo680
gpilotd-Message: Client appears to be disconnected...

(gpilotd:19801): gpilotd-WARNING **: orbit_daemon_glue.c:1488
Exception: IDL:omg.org/CORBA/COMM_FAILURE:1.0

gpilotd-Message: removing monitor on Treo680 for IOR:010000

gpilotd-Message: Instantiating 2 conduits...
ecalconduit-Message: in calendar's conduit_get_gpilot_conduit

ememoconduit-Message: in memo's conduit_get_gpilot_conduit

gpilotd-Message: Instantiated 0 backup conduits, 0 file conduits, 2
other conduits
gpilotd-Message: HotSync button pressed, synchronizing PDA
gpilotd-Message: PDA ID is 3049233860, name is Treo680, owner is chris
gpilotd-Message: Pilot has 0 entries in restore queue
gpilotd-Message: Pilot has 0 entries in conduit queue
gpilotd-Message: Base ContactsDB-PAdd is to be ignored by sync
gpilotd-Message: Base CalendarDB-PDat is to be ignored by sync
gpilotd-Message: Base AddressDB is to be ignored by sync
gpilotd-Message: Base DatebookDB is to be ignored by sync
ememoconduit-Message: -----------------------------------------------------=
----

ememoconduit-Message: pre_sync: Memo Conduit v.0.1.6
ememoconduit-Message: Memo Conduit v.0.1.6
ememoconduit-Message:   Using timezone:
/freeassociation.sourceforge.net/Tzfile/America/Regina
ememoconduit-Message: num_records: 245
add_records: 0
mod_records: 0
del_records: 0

ememoconduit-Message:   Current URI
file:///home/paynec/.evolution/memos/local/system
(file:///home/paynec/.evolution/memos/local/system)

ememoconduit-Message:     doing fast sync

ememoconduit-Message: for_each_modified beginning

ememoconduit-Message: iterating over 0 records
ememoconduit-Message: no events
ememoconduit-Message: post_sync: Memo Conduit v.0.1.6
ememoconduit-Message: -----------------------------------------------------=
----
gpilotd-Message: Base AddressPhones_en_US is to be ignored by sync
gpilotd-Message: Base __sysPhoneContacts-PmPp1.jpg is to be ignored by sync
gpilotd-Message: Base Addr Category Ringtones is to be ignored by sync
gpilotd-Message: Base ContactsANIndex-PAdd is to be ignored by sync
gpilotd-Message: Base ContactsBDIndex-PAdd is to be ignored by sync
gpilotd-Message: Base AddressCitiesDB is to be ignored by sync
gpilotd-Message: Base AddressCompaniesDB is to be ignored by sync
gpilotd-Message: Base AddressCountriesDB is to be ignored by sync
gpilotd-Message: Base CalendarLocationsDB-PDat is to be ignored by sync
gpilotd-Message: Base AddressStatesDB is to be ignored by sync
gpilotd-Message: Base AddressTitlesDB is to be ignored by sync
gpilotd-Message: Base Txn Log 50416464 is to be ignored by sync
gpilotd-Message: Synchronization ended
gpilotd-Message: setting PILOTRATE=3D57600

(gpilotd:19801): gpilotd-WARNING **: An error occurred while getting
the PDA's system data

(gpilotd:19801): gpilotd-WARNING **: error -201 from pi_close.