[glade--] I can't build a simple project

Hello,

I'm using glade-- version : 2.6.0-1.2 (Ubuntu dapper package)

I'm trying to build a simple project through glade-2.

when I build the project from glade-2 I get these lines :
sh: autoconf2.50: command not found
Found pkg-config version 0.19.0
Generating code for gtk 2.8.6 (pkg-config), gtkmm 2.8.1 (pkg-config)
Using autoconf 2.59.0, automake-1.9 1.9.6, glib's gettext

Now I quit glade and run from the console:
./autogen.sh

This is the whole output :
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
GNU Make 3.80 found
autoconf (GNU Autoconf) 2.59 found
automake (GNU automake) 1.9.6 found
This script runs configure and make...
You did remember necessary arguments for configure, right?
/usr/share/aclocal/nspr.m4:8: warning: underquoted definition of AM_PATH_NS=
PR
  run info '(automake)Extending aclocal'
  or see http://sources.redhat.com/automake/automake.html#Extending-aclocal
/usr/share/aclocal/glib.m4:8: warning: underquoted definition of AM_PATH_GL=
IB
Symlinking file ABOUT-NLS
Symlinking file config.rpath
Symlinking file mkinstalldirs
Not copying intl/ directory.
Symlinking file po/Makefile.in.in
Symlinking file po/boldquot.sed
Symlinking file po/[email protected]
Symlinking file po/[email protected]
Symlinking file po/insert-header.sin
Symlinking file po/Makevars.template
Symlinking file po/quot.sed
Symlinking file po/remove-potcdate.sin
Symlinking file po/Rules-quot
Adding an entry to po/ChangeLog (backup is in po/ChangeLog~)
Creating directory m4
Symlinking file m4/codeset.m4
Symlinking file m4/gettext.m4
Symlinking file m4/glibc2.m4
Symlinking file m4/glibc21.m4
Symlinking file m4/iconv.m4
Symlinking file m4/intdiv0.m4
Symlinking file m4/intmax.m4
Symlinking file m4/inttypes.m4
Symlinking file m4/inttypes_h.m4
Symlinking file m4/inttypes-pri.m4
Symlinking file m4/isc-posix.m4
Symlinking file m4/lcmessage.m4
Symlinking file m4/lib-ld.m4
Symlinking file m4/lib-link.m4
Symlinking file m4/lib-prefix.m4
Symlinking file m4/longdouble.m4
Symlinking file m4/longlong.m4
Symlinking file m4/nls.m4
Symlinking file m4/po.m4
Symlinking file m4/printf-posix.m4
Symlinking file m4/progtest.m4
Symlinking file m4/signed.m4
Symlinking file m4/size_max.m4
Symlinking file m4/stdint_h.m4
Symlinking file m4/uintmax_t.m4
Symlinking file m4/ulonglong.m4
Symlinking file m4/wchar_t.m4
Symlinking file m4/wint_t.m4
Symlinking file m4/xsize.m4
Creating m4/Makefile.am
Creating m4/ChangeLog
Updating Makefile.am (backup is in Makefile.am~)
Updating configure.in (backup is in configure.in~)
Adding an entry to ChangeLog (backup is in ChangeLog~)

Please use AM_GNU_GETTEXT([external]) in order to cause autoconfiguration
to look for an external libintl.

Please create po/Makevars from the template in po/Makevars.template.
You can then remove po/Makevars.template.

Please run 'aclocal -I m4' to regenerate the aclocal.m4 file.
You need aclocal from GNU automake 1.5 (or newer) to do this.
Then run 'autoconf' to regenerate the configure file.

Please run 'automake m4/Makefile' to create m4/Makefile.in

You might also want to copy the convenience header file gettext.h
from the /usr/share/gettext directory into your package.
It is a wrapper around <libintl.h> that implements the configure --disable-=
nls
option.

Press Return to acknowledge the previous five paragraphs.

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

if I run autogen.sh again, I get :
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

GNU Make 3.80 found
autoconf (GNU Autoconf) 2.59 found
automake (GNU automake) 1.9.6 found
This script runs configure and make...
You did remember necessary arguments for configure, right?
/usr/share/aclocal/nspr.m4:8: warning: underquoted definition of AM_PATH_NS=
PR
  run info '(automake)Extending aclocal'
  or see http://sources.redhat.com/automake/automake.html#Extending-aclocal
/usr/share/aclocal/glib.m4:8: warning: underquoted definition of AM_PATH_GL=
IB
gettextize: *** po/Makefile.in.in exists: use option -f if you really
want to delete it.
gettextize: *** Stop.
configure.in: installing `./missing'
src/Makefile.am: installing `./depcomp'
Makefile.am: installing `./INSTALL'
Makefile.am: installing `./COPYING'
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
........
........(seems irrelevant to me...)
........
........
/usr/bin/make  all-recursive
make[1]: Entering directory `/home/nirro/Projects/webmm2'
Making all in m4
make[2]: Entering directory `/home/nirro/Projects/webmm2/m4'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/nirro/Projects/webmm2/m4'
Making all in po
make[2]: Entering directory `/home/nirro/Projects/webmm2/po'
make[2]: *** No rule to make target `/config.status', needed by
`Makefile'.  Stop.
make[2]: Leaving directory `/home/nirro/Projects/webmm2/po'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/nirro/Projects/webmm2'
make: *** [all] Error 2

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D


What is the problem and what is the fix ?

Thanks,
Nir.