file '/tmp/gconfd-root/lock/ior' not opened successfully,
Peter Janda <[email protected]> Fri, 18 Jan 2008 13:22:10 -0600
| Newsgroups | gmane.comp.gnome.lib.gconf |
|---|---|
| Message-ID | <OF927A3546.2D53D5BC-ON862573D4.005CCC6B-862573D4.006A6679@us.ibm.com> |
Some other weird thing is wrong with my gconf!!! Try shutting down gconfd (gconftool-2 --shutdown) and running the gconf-sanity-check-1 or gconf-sanity-check-2 applications - these will tell you about common problems. Also, be sure you have the latest GConf version. If you can't figure out what's going on, mail [email protected] with the following information: Exact error messages from any applications. Exact version of GConf 1 and GConf 2 that you have installed. Output of ps jaxwww | grep gconf. Output of gconf-sanity-check-1 or gconf-sanity-check-2 if any. What operating system are you using, and what version of it. What appears in the user.* syslog (see above for how to turn on user.* syslog). Before you mail, please read this whole web page. Jan 18 11:56:50 gconfd (root-27177): starting (version 2.8.1), pid 27177 user 'root' Jan 18 11:56:50 gconfd (root-27177): Bad permissions 1777 on directory /tmp/gconfd-root Jan 18 11:56:50 gconfd (root-27177): Failed to write byte to pipe file descriptor 13 so client program may hang: Transport endpoint is not connected Jan 18 11:56:50 gconfd (root-27177): Failed to get lock for daemon, exiting: Directory /tmp/gconfd-root ha s a problem, gconfd can't use it Jan 18 11:57:44 gconfd (root-27225): starting (version 2.8.1), pid 27225 user 'root' Jan 18 11:57:44 gconfd (root-27225): Bad permissions 1777 on directory /tmp/gconfd-root Jan 18 11:57:44 gconfd (root-27225): Failed to get lock for daemon, exiting: Directory /tmp/gconfd-root ha s a problem, gconfd can't use it Jan 18 12:00:30 gconfd (root-27366): starting (version 2.8.1), pid 27366 user 'root' Jan 18 12:00:30 gconfd (root-27366): Bad permissions 1777 on directory /tmp/gconfd-root Jan 18 12:00:30 gconfd (root-27366): Failed to get lock for daemon, exiting: Directory /tmp/gconfd-root has a problem, gconfd can't use it Jan 18 12:07:58 gconfd (root-27688): starting (version 2.8.1), pid 27688 user 'root' Jan 18 12:07:58 gconfd (root-27688): Bad permissions 1777 on directory /tmp/gconfd-root Jan 18 12:07:58 gconfd (root-27688): Failed to get lock for daemon, exiting: Directory /tmp/gconfd-root has a problem, gconfd can't use it Jan 18 12:08:32 gconfd (root-27723): starting (version 2.8.1), pid 27723 user 'root' Jan 18 12:08:32 gconfd (root-27723): Bad permissions 1777 on directory /tmp/gconfd-root Jan 18 12:08:32 gconfd (root-27723): Failed to write byte to pipe file descriptor 13 so client program may hang: Transport endpoint is not connected Jan 18 12:08:32 gconfd (root-27723): Failed to get lock for daemon, exiting: Directory /tmp/gconfd-root has a problem, gconfd can't use it Jan 18 12:10:56 gconfd (root-27826): starting (version 2.8.1), pid 27826 user 'root' Jan 18 12:10:56 gconfd (root-27826): Wrong permissions for /tmp/orbit-root Jan 18 12:10:56 last message repeated 2 times Jan 18 12:10:56 gconfd (root-27826): Bad permissions 777 on directory /tmp/gconfd-root Jan 18 12:10:56 gconfd (root-27826): Failed to write byte to pipe file descriptor 13 so client program may hang: Transport endpoint is not connected Jan 18 12:10:56 gconfd (root-27826): Failed to get lock for daemon, exiting: Directory /tmp/gconfd-root has a problem, gconfd can't use it Jan 18 12:13:26 gconfd (root-27951): starting (version 2.8.1), pid 27951 user 'root' Jan 18 12:13:26 gconfd (root-27951): Wrong permissions for /tmp/orbit-root Jan 18 12:13:26 gconfd (root-27951): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a r ead-only configuration source at position 0 Jan 18 12:13:26 gconfd (root-27951): Resolved address "xml:readwrite:/root/.gconf" to a writable configura tion source at position 1 Jan 18 12:13:26 gconfd (root-27951): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a re ad-only configuration source at position 2 Jan 18 12:13:26 gconfd (root-27951): Failed to write byte to pipe file descriptor 13 so client program may hang: Transport endpoint is not connected Jan 18 12:13:26 gconfd (root-27951): error condition on server fd is 0x20 Jan 18 12:13:56 last message repeated 1050191 times Jan 18 12:13:56 gconfd (root-27951): GConf server is not in use, shutting down. Jan 18 12:13:56 gconfd (root-27951): Exiting Jan 18 12:15:17 gconfd (root-28051): starting (version 2.8.1), pid 28051 user 'root' Jan 18 12:15:17 gconfd (root-28051): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a r ead-only configuration source at position 0 Jan 18 12:15:17 gconfd (root-28051): Resolved address "xml:readwrite:/root/.gconf" to a writable configura tion source at position 1 Jan 18 12:15:17 gconfd (root-28051): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a re ad-only configuration source at position 2 Jan 18 12:15:17 gconfd (root-28051): Failed to write byte to pipe file descriptor 13 so client program may hang: Transport endpoint is not connected Jan 18 12:15:17 gconfd (root-28051): error condition on server fd is 0x20 Jan 18 12:15:47 last message repeated 1048718 times Jan 18 12:15:47 gconfd (root-28051): GConf server is not in use, shutting down. Jan 18 12:15:47 gconfd (root-28051): Exiting After resetting the permissions of /tmp to 777 and and then resetting the permissions on: drwx------ 3 root root 4096 Jan 18 12:22 gconfd-root drwx------ 2 root root 4096 Jan 18 12:38 lock drwx------ 2 root root 4096 Jan 18 12:52 orbit-root Everything worked again. I'm not sure if this was needed or not: -rw-r--r-- 1 root root 14 Jan 18 11:51 /etc/orbitrc [root@omnibus]# cat /etc/orbitrc ORBIIOPIPv4=1 But I left it that way. Jan 18 12:26:28 gpm[19593]: Started gpm successfully. Entered daemon mode. Jan 18 12:26:28 gpm[19593]: *** info [mice.c(1766)]: Jan 18 12:26:28 gpm[19593]: imps2: Auto-detected intellimouse PS/2 Jan 18 12:27:05 fstab-sync[20093]: removed all generated mount points Jan 18 12:27:05 fstab-sync[20104]: added mount point /media/cdrecorder for /dev/hdc Jan 18 12:38:41 gconfd (root-21954): starting (version 2.8.1), pid 21954 user 'root' Jan 18 12:38:41 gconfd (root-21954): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Jan 18 12:38:41 gconfd (root-21954): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1 Jan 18 12:38:41 gconfd (root-21954): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Jan 18 12:38:49 gconfd (root-21954): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 0 _______________________________________________ gconf-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/gconf-list