Re: voicetronix + hangup

I use bayonne-1.2.14pl2 . In bayonne.conf, I have already modified "drop=y": 


# Voicetronix hardware paramaters
[vpb]
; physical i/o port address of first card in hex
;first = 300 

; number of cards to test for
;cards = 1 

; number of channels per card
;channels = 4 

; number of k in stack frame of vpb thread
;stack = 8 

; interval delay in async event thread, for cpu loading.
;delay = 10 

; values to use in defining reorder tone detection which can act as
; an optional disconnect, example here is from fsf switch.
;reorder = 440, 350 

; specify voicetronix card model, V4PCI for OpenSwitch4, and
; V12PCI for OpenSwitch12.
model = V4PCI 

; for V12PCI, specify station blocks for each card, a (first 8),
; b (last 4), or n for trunk only card
stations = aabn 

; faster step and sync timers
step timer = 20ms
sync timer = 30ms 

; drop disconnect
drop = y 


Are there other ideas? 

Thanks. 

--  

Alessio Pomaro
pnfStudio s.n.c.
Viale Porta Po, 94
45100 Rovigo RO (Italy) 

Contacts:
tel. (+39) 0425 404193
fax. (+39) 0425 988982
mob. (+39) 320 2392615
Web: http://www.pnfstudio.com 


CONFIDENZIALE: Questo messaggio e gli eventuali allegati sono
confidenziali e riservati.Se vi è stato recapitato per errore e non siete
fra i destinatarielencati, siete pregatidi darne immediatamente avviso al
mittente. Le informazioni contenutenon devono essere mostrate ad altri,
né utilizzate, memorizzate o copiate in qualsiasiforma. 

CONFIDENTIAL: This  e-mail  and  any attachments are confidential andmay
contain reserved information.If  you are not one of the named recipients, 
please notify the senderimmediately.Moreover, you should not disclose the
contents to any other persons, norshould the information containedbe used
for any purpose or stored or copied in any form. 


David Sugar Scrive: 

> Is this a bayonne1 or bayonne2 question?  In Bayonne1 there was a drop= 
> option in the [vpb] section because some older cards had problems and 
> would give false drops.  That may need to be set "drop = y". 
> 
> Alessio Pomaro wrote:
>> Hi,
>> I'm working with Fedora Core 1 - kernel 2.4.22-1.2199.5.legacy.nptl
>> I have installed a voicetronix board (model: v4pci16 -> 
>> http://www.voicetronix.com/vpb4_v4pci.htm -> "Robust loop drop detection 
>> - suitable for the North American telephony network in detecting far end 
>> hang up") and voicetronix driver 2.4.8 
>> (http://www.voicetronix.com/downloads.htm).
>> There is a problem with hangup event (^hangup) -> event is not 
>> recognized.
>> Have I to modify bayonne.conf ?
>> Thanks!
>> -- 
>> Alessio Pomaro
>> pnfStudio s.n.c.
>> Viale Porta Po, 94
>> 45100 Rovigo RO (Italy)
>> Contacts:
>> tel. (+39) 0425 404193
>> fax. (+39) 0425 988982
>> mob. (+39) 320 2392615
>> Web:http://www.pnfstudio.com
>> CONFIDENZIALE: Questo messaggio e gli eventuali allegati sono 
>> confidenziali e riservati.Se vi è stato recapitato per errore e non siete 
>> fra i destinatarielencati, siete pregatidi darne immediatamente avviso al 
>> mittente. Le informazioni contenutenon devono essere mostrate ad altri, 
>> né utilizzate, memorizzate o copiate in qualsiasiforma.
>> CONFIDENTIAL: This  e-mail  and  any attachments are confidential andmay 
>> contain reserved information.If  you are not one of the named recipients, 
>> please notify the senderimmediately.Moreover, you should not disclose the 
>> contents to any other persons, norshould the information containedbe used 
>> for any purpose or stored or copied in any form. 
>> 
>> 
>> _______________________________________________
>> Bayonne-devel mailing list
>> [email protected]
>> http://lists.gnu.org/mailman/listinfo/bayonne-devel