Re: Bayonne 2 0.3.0

You should be able to run bayonne with the path of a script file you 
wish to test directly, as in something like "server.exe -trace soundcard 
mytest.scr".  When used this way, all calls are routed through the 
single script file.

The sip driver is setup to register to a sip server such as partysip.  I 
think partysip can be built on w32, or that there are builds floating 
about.  The sip driver needs to be modified to accept direct (non-proxy) 
uri mapping, and I was going to do that with the assign.sip command in 
the future.

[email protected] wrote:
> Hi David,
> 
> Now I can compile under win32 but how do I go any further? How do I run a
> simple script using either sip or soundcard driver. Also what sip client sw
> should I use for testing sip functionality.
> 
> Ambar Roy 
> 
> 
>>-----Original Message-----
>>From: David Sugar [mailto:[email protected]] 
>>Sent: Friday, June 17, 2005 11:46 PM
>>To: [email protected]
>>Cc: 'mailing_list_bayonne-devel'
>>Subject: Re: [Bayonne-devel] Bayonne 2 0.3.0
>>
>>My mistake, -load is used in the posix wrapper script.  It becomes 
>>-trace when invoking bayonne.bin (or server.exe).  -trace is meant to 
>>log to stdout and run live mode in the forground, while 
>>-start is meant 
>>for daemon mode startup....
>>
>>On server.exe there is also a -dump-registry which gives you 
>>the "raw" 
>>config as found at server startup and gives a good idea what 
>>it may have 
>>read from the registry and/or ini files. -dump-install has extra 
>>processing and fills in missing defaults.
>>
>>In any case, for you to use server.exe -trace soundcard, you 
>>will also 
>>need "soundcard.rll" to be in C:\Program Files\Common Files\GNU 
>>Telephony\Bayonne Drivers, and hopefully it is there :).
>>
>>[email protected] wrote:
>>
>>>Hi David,
>>>
>>>C:\Program Files\Common Files\GNU Telephony\Runtime>server -load
>>>bayonne: -load: unknown option
>>>
>>>C:\Program Files\Common Files\GNU Telephony\Runtime>server --load
>>>bayonne: --load: unknown option
>>>
>>>C:\Program Files\Common Files\GNU Telephony\Runtime>server 
>>
>>-dump-install
>>
>>>SERVER VERSION 0.1.0; XXXXXXXXXX w32 x86
>>>scripts = C:\Program Files\GNU Telephony\Bayonne Scripts
>>>modules = C:\Program Files\Common Files\GNU 
>>
>>Telephony\Bayonne Plugins
>>
>>>datafiles = C:\Program Files\GNU Telephony\Bayonne Files
>>>include = C:\Program Files\GNU Telephony\Bayonne Scripts
>>>config = C:\Program Files\GNU Telephony\Bayonne Config
>>>prompts = C:\Program Files\GNU Telephony\Bayonne Audio
>>>logfiles = C:\Program Files\GNU Telephony\Bayonne Logs
>>>drivers = C:\Program Files\Common Files\GNU 
>>
>>Telephony\Bayonne Drivers
>>
>>>runfiles = C:\Program Files\GNU Telephony\Bayonne Logs
>>>phrases = C:\Program Files\Common Files\GNU 
>>
>>Telephony\Bayonne Languages
>>
>>>tmpfs = C:\DOCUME~1\xxxxxx\LOCALS~1\Temp
>>>tones = C:\Program Files\GNU Telephony\Bayonne Config/tones.conf
>>>tmp = C:\DOCUME~1\xxxxxx\LOCALS~1\Temp
>>>libexec = C:\Program Files\GNU Telephony\Bayonne Libxec 
>>>
>>>
>>>Ambar Roy
>>>
>>>
>>>>-----Original Message-----
>>>>From: David Sugar [mailto:[email protected]] 
>>>>Sent: Friday, June 17, 2005 10:56 PM
>>>>To: [email protected]
>>>>Cc: [email protected]; 'mailing_list_bayonne-devel'
>>>>Subject: Re: [Bayonne-devel] Bayonne 2 0.3.0
>>>>
>>>>--test assumes the "build" environment, or, for w32, the Release 
>>>>subdirectory of the project build.  What happens if you use --load 
>>>>soundcard? What do you get with "server -dump-install", and "server 
>>>>-dump-testing"?  Those should at least give a good idea where 
>>>>the server 
>>>>thinks things are installed for "test" and "live" modes.
>>>>
>>>>And yes, I do desperately need a simple README/FAQ for the 
>>>>w32 build as 
>>>>well :)
>>>>
>>>>[email protected] wrote:
>>>>
>>>>
>>>>>Got this.
>>>>>
>>>>>The installer creates a shortcut to bayonne.exe while it 
>>>>
>>>>should create it
>>>>
>>>>
>>>>>for server.exe.
>>>>>
>>>>>Also running the shortcut does not do anything after I 
>>>>
>>>>changed it from
>>>>
>>>>
>>>>>bayonne.exe to server.exe!
>>>>>
>>>>>Running "server --test soundcard" from command line shows this:
>>>>>
>>>>>C:\Program Files\Common Files\GNU Telephony\Runtime>server 
>>>>
>>>>--test soundcard
>>>>
>>>>
>>>>>testing 0.1.0 on x86 w32; driver=soundcard, timeslots=32
>>>>>server exiting; reason=-1
>>>>>
>>>>>Regards,
>>>>>
>>>>>Ambar Roy
>>>>>
>>>>>One97 Communications Pvt. Ltd.
>>>>>701 Arunachal Building,
>>>>>19 Barakhamba Road,
>>>>>New Delhi - 110001
>>>>>
>>>>>+91-9810094479
>>>>>[email protected]
>>>>>
>>>>>
>>>>>
>>>>>>Source: "C:\Software\testing\bayonne2\w32\Release\*.exe"; 
>>
>>DestDir: 
>>
>>>>>>"{cf}\GNU Telephony\Runtime"; Components: runtime
>>>>>>
>>>>>>It should be in Program Files\Common Files\GNU 
>>
>>Telephony\Runtime...
>>
>>>>>>[email protected] wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>>Hi David,
>>>>>>>
>>>>>>>I downloaded and installed the Win32 Installer. There are 
>>>>>>
>>>>>>no executables?
>>>>>>
>>>>>>
>>>>>>
>>>>>>>Ambar 
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>-----Original Message-----
>>>>>>>>From: David Sugar [mailto:[email protected]] 
>>>>>>>>Sent: Friday, June 17, 2005 3:31 AM
>>>>>>>>To: mailing_list_bayonne-devel
>>>>>>>>Subject: Re: [Bayonne-devel] Bayonne 2 0.3.0
>>>>>>>>
>>>>>>>>I probably should have mentioned there is also a brand new 
>>>>>>>>bayonne w32 
>>>>>>>>build (bayonne2.exe) release, and the first OS/X 
>>
>>package release.
>>
>>>>>>>>http://www.gnutelephony.org/bayonne2.exe
>>>>>>>>http://www.gnutelephony.org/gnutelephony.zip
>>>>>>>>
>>>>>>>>David Sugar wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>I managed to drop off a 0.3.0 release today which has a lot of 
>>>>>>>>>phrasebook stuff now complete, including initial phrasebook 
>>>>>>>>
>>>>>>>>models for 
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>English, French, and Italian.  The Russian, Spanish, and 
>>>>>>>>
>>>>>>>>Bengali ones 
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>should get into the next point release.
>>>>>>>>>
>>>>>>>>>_______________________________________________
>>>>>>>>>Bayonne-devel mailing list
>>>>>>>>>[email protected]
>>>>>>>>>http://lists.gnu.org/mailman/listinfo/bayonne-devel
>>>>>>>>
>>>>>>>_______________________________________________
>>>>>>>Bayonne-devel mailing list
>>>>>>>[email protected]
>>>>>>>http://lists.gnu.org/mailman/listinfo/bayonne-devel
>>>>>>
>>>>>
>>>>>_______________________________________________
>>>>>Bayonne-devel mailing list
>>>>>[email protected]
>>>>>http://lists.gnu.org/mailman/listinfo/bayonne-devel
>>>>

_______________________________________________
Bayonne-devel mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/bayonne-devel

begin:vcard
fn:David Sugar
n:Sugar;David
org:GNU Telephony
adr:;;;;;;USA
email;internet:[email protected]
x-mozilla-html:FALSE
url:http://www.gnutelephony.org
version:2.1
end:vcard