RE: Intel Dialogic System Release 6.1 and Bayonne

Because else Dialogic 5.1 SP1 or SR1 does not start with more then 512MB
on the server.

I found this while adding memory in an old server and since then I face
this problem on every servers.

I have to limit memory in lilo or grub.

image=/boot/vmlinuz-2.4.18-5
        label=linux
        initrd=/boot/initrd-2.4.18-5.img
        read-only
        root=/dev/hda3
        append="mem=511M"

I can leave with 512MB and springware boards but it would be better if I
can find the fix and be able use more memory.

Julien



-----Original Message-----
From: David Sugar [mailto:[email protected]] 
Sent: August 2, 2005 11:27 PM
To: Julien Chavanton
Cc: [email protected]; Ambar Roy; mailing_list_bayonne-devel
Subject: Re: [Bayonne-devel] Intel Dialogic System Release 6.1 and
Bayonne

What happened if you had more than 512 meg?  I guess 5.1sp2 would also
work okay also with rhel 2.1/centos 2 since it was rh 7.x based...

Julien Chavanton wrote:
> Something annoying, 6.1 is not supporting spring ware board ;(
> 
> I think the most updated drivers (this year) is:
> 
> Intel(r) Dialogic(r) System Release 5.1 Feature Pack 2 for Linux
Service
> Update 45.
> 
>
http://resource.intel.com/telecom/support/releases/unix51/linux51fp1/Onl
> doc/update/relnotes.pdf
> 
> I hope Intel/Dialogic can give you a free version to encourage
everybody
> to purchase this drivers update.
> 
> I have problem with memory limitation on previous drivers; I was never
> able to set more the 512 MB on my Linux server.
> 
> Julien
> 
> 
> 
> -----Original Message-----
> From:
bayonne-devel-bounces+j.chavanton=oneworldinteractive.com@gnu.org
>
[mailto:[email protected]
> g] On Behalf Of David Sugar
> Sent: August 2, 2005 6:42 AM
> To: Ambar Roy
> Cc: 'mailing_list_bayonne-devel'
> Subject: Re: [Bayonne-devel] Intel Dialogic System Release 6.1 and
> Bayonne
> 
> I would like to setup a test system here to get the bayonne2 dialogic 
> drivers back to an operational level sometime this year, but what 
> distros is 6.1 directly supporting?
> 
> Ambar Roy wrote:
> 
>>Tony,
>>
>>I have no idea on 6.1 release under linux except what I have read on
> 
> intel
> 
>>site. My experience on windows has shown that the 6.x series should be
>>backward compatible with 5.x series. Gc_basic_call_model is a sample
> 
> gc app
> 
>>that comes with dialogic system release.
>>
>>Regards,
>>
>>Ambar Roy
>>
>>
>>
>>
>>>-----Original Message-----
>>>From: Tony Stocker [mailto:[email protected]] 
>>>Sent: Monday, August 01, 2005 10:18 PM
>>>To: mailing_list_bayonne-devel
>>>Subject: Re: [Bayonne-devel] Intel Dialogic System Release 
>>>6.1 and Bayonne
>>>
>>>Ambar,
>>>
>>>I was hoping to run Bayonne on a Mandrake 10.x system and it looked
>>
>>>from the documentation that the 5.1 materials weren't rated to run on
>>
>>>it, whereas the 6.1 suggests that it at least supports 10.1.
>>>
>>>Do you think the 6.1 package might contain all of the elements that
>>>used to be in the three 5.1 packages?
>>>
>>>Is the Gc_basic_call_model a program?  If so, where can I find it?
>>>
>>>Thanks for the help.
>>>
>>>Tony
>>>
>>>On 7/26/05, mailing_list_bayonne-devel <[email protected]> wrote:
>>>
>>>
>>>>Hi Tony,
>>>>
>>>>You can always download and run SR 5.1 and install the SP1. 
>>>
>>>Although 6.1
>>>
>>>
>>>>should be fully backward compatible with 5.1.
>>>>
>>>>First set up 6.1 and run some sample programs. 
>>>
>>>Gc_basic_call_model is a good
>>>
>>>
>>>>one to try. And then try running bayonne.
>>>>
>>>>Regards,
>>>>
>>>>Ambar Roy
>>>>
>>>>
>>>>
>>>>>-----Original Message-----
>>>>>From: Tony Stocker [mailto:[email protected]]
>>>>>Sent: Tuesday, July 26, 2005 2:21 AM
>>>>>To: [email protected]
>>>>>Subject: [Bayonne-devel] Intel Dialogic System Release 
>>>
>>>6.1 and Bayonne
>>>
>>>
>>>>>Hello All,
>>>>>
>>>>>We recently purchased an Intel Dialogic D/41-JCT-LS board and the
>>>>>System Release 6.1 for Linux with the intention of 
>>>
>>>installing it for
>>>
>>>
>>>>>use with Bayonne.  However the documentation at
>>>>>http://www.gnu.org/software/bayonne/documentation.html 
>>>
>>>seems to refer
>>>
>>>
>>>>>only to version 5.1 and talks about needing three 
>>>
>>>different packages
>>>
>>>
>>>>>(Service Release, Service Pack, Feature Pack) and the CD that we
>>>>>received from Intel only seems to have one package on it.
>>>>>
>>>>>I'm curious to know if anyone has setup Bayonne with a 
>>>
>>>Dialogic board
>>>
>>>
>>>>>and the 6.1 system release.
>>>>>
>>>>>Thanks,
>>>>>
>>>>>Tony
>>>>>
>>>>>
>>>>>_______________________________________________
>>>>>Bayonne-devel mailing list
>>>>>[email protected]
>>>>>http://lists.gnu.org/mailman/listinfo/bayonne-devel
>>>>>
>>>>>
>>>>
>>>>
>>>_______________________________________________
>>>Bayonne-devel mailing list
>>>[email protected]
>>>http://lists.gnu.org/mailman/listinfo/bayonne-devel
>>>
>>>
>>
>>
>>
>>
>>_______________________________________________
>>Bayonne-devel mailing list
>>[email protected]
>>http://lists.gnu.org/mailman/listinfo/bayonne-devel