RE: Intel Dialogic System Release 6.1 and Bayonne

I think I am missing some information.

Strangely this problem/limitation takes place only when there are more
then 3 or more dual boards present.

I hope I have the correct problem description.
Julien

-----Original Message-----
From: [email protected] [mailto:[email protected]] 
Sent: August 3, 2005 1:16 PM
To: [email protected]
Cc: Julien Chavanton; Ambar Roy; mailing_list_bayonne-devel
Subject: Re: [Bayonne-devel] Intel Dialogic System Release 6.1 and
Bayonne



Hum ???

We use Red Hat 7.3  Linux (2.4.18-3) with R 5.1 SP1 with MORE than 512MB


our config :

# cat /usr/dialogic/cfg/buildinfo  
Intel Corporation System Software for Linux Intel
System Release 5.1 for Linux Intel SP1
Build Date=09/13/2002
Build Number=22


# cat /proc/meminfo 
        total:    used:    free:  shared: buffers:  cached:
Mem:  1584857088 109162496 1475694592        0 29310976 40333312
Swap: 2089209856        0 2089209856
MemTotal:      1547712 kB
MemFree:       1441108 kB
MemShared:           0 kB
Buffers:         28624 kB
Cached:          39388 kB
SwapCached:          0 kB
Active:          84828 kB
Inact_dirty:       140 kB
Inact_clean:      1072 kB
Inact_target:    17208 kB
HighTotal:      654456 kB
HighFree:       593828 kB
LowTotal:       893256 kB
LowFree:        847280 kB
SwapTotal:     2040244 kB
SwapFree:      2040244 kB
Committed_AS:   183504 kB


Emmanuel



On Wed, Aug 03, 2005 at 10:10:31AM -0500, David Sugar wrote:
> Hmm...I had a test server I was experiancing this problem on also, 
> though it already had more than 512m, so I didn't realize at the time 
> this was the issue.
> 
> Julien Chavanton wrote:
> >Because else Dialogic 5.1 SP1 or SR1 does not start with more then
512MB
> >on the server.
> >
> >I found this while adding memory in an old server and since then I
face
> >this problem on every servers.
> >
> >I have to limit memory in lilo or grub.
> >
> >image=/boot/vmlinuz-2.4.18-5
> >        label=linux
> >        initrd=/boot/initrd-2.4.18-5.img
> >        read-only
> >        root=/dev/hda3
> >        append="mem=511M"
> >
> >I can leave with 512MB and springware boards but it would be better
if I
> >can find the fix and be able use more memory.
> >
> >Julien
> >
> >
> >
> >-----Original Message-----
> >From: David Sugar [mailto:[email protected]] 
> >Sent: August 2, 2005 11:27 PM
> >To: Julien Chavanton
> >Cc: [email protected]; Ambar Roy; mailing_list_bayonne-devel
> >Subject: Re: [Bayonne-devel] Intel Dialogic System Release 6.1 and
> >Bayonne
> >
> >What happened if you had more than 512 meg?  I guess 5.1sp2 would
also
> >work okay also with rhel 2.1/centos 2 since it was rh 7.x based...
> >
> >Julien Chavanton wrote:
> >
> >>Something annoying, 6.1 is not supporting spring ware board ;(
> >>
> >>I think the most updated drivers (this year) is:
> >>
> >>Intel(r) Dialogic(r) System Release 5.1 Feature Pack 2 for Linux
> >
> >Service
> >
> >>Update 45.
> >>
> >>
> >
>
>http://resource.intel.com/telecom/support/releases/unix51/linux51fp1/On
l
> >
> >>doc/update/relnotes.pdf
> >>
> >>I hope Intel/Dialogic can give you a free version to encourage
> >
> >everybody
> >
> >>to purchase this drivers update.
> >>
> >>I have problem with memory limitation on previous drivers; I was
never
> >>able to set more the 512 MB on my Linux server.
> >>
> >>Julien
> >>
> >>
> >>
> >>-----Original Message-----
> >>From:
> >
> >bayonne-devel-bounces+j.chavanton=oneworldinteractive.com@gnu.org
> >
>
>[mailto:[email protected]
r
> >
> >>g] On Behalf Of David Sugar
> >>Sent: August 2, 2005 6:42 AM
> >>To: Ambar Roy
> >>Cc: 'mailing_list_bayonne-devel'
> >>Subject: Re: [Bayonne-devel] Intel Dialogic System Release 6.1 and
> >>Bayonne
> >>
> >>I would like to setup a test system here to get the bayonne2
dialogic 
> >>drivers back to an operational level sometime this year, but what 
> >>distros is 6.1 directly supporting?
> >>
> >>Ambar Roy wrote:
> >>
> >>
> >>>Tony,
> >>>
> >>>I have no idea on 6.1 release under linux except what I have read
on
> >>
> >>intel
> >>
> >>
> >>>site. My experience on windows has shown that the 6.x series should
be
> >>>backward compatible with 5.x series. Gc_basic_call_model is a
sample
> >>
> >>gc app
> >>
> >>
> >>>that comes with dialogic system release.
> >>>
> >>>Regards,
> >>>
> >>>Ambar Roy
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>>-----Original Message-----
> >>>>From: Tony Stocker [mailto:[email protected]] 
> >>>>Sent: Monday, August 01, 2005 10:18 PM
> >>>>To: mailing_list_bayonne-devel
> >>>>Subject: Re: [Bayonne-devel] Intel Dialogic System Release 
> >>>>6.1 and Bayonne
> >>>>
> >>>>Ambar,
> >>>>
> >>>>I was hoping to run Bayonne on a Mandrake 10.x system and it
looked
> >>>
> >>>>from the documentation that the 5.1 materials weren't rated to run
on
> >>>
> >>>
> >>>>it, whereas the 6.1 suggests that it at least supports 10.1.
> >>>>
> >>>>Do you think the 6.1 package might contain all of the elements
that
> >>>>used to be in the three 5.1 packages?
> >>>>
> >>>>Is the Gc_basic_call_model a program?  If so, where can I find it?
> >>>>
> >>>>Thanks for the help.
> >>>>
> >>>>Tony
> >>>>
> >>>>On 7/26/05, mailing_list_bayonne-devel <[email protected]>
wrote:
> >>>>
> >>>>
> >>>>
> >>>>>Hi Tony,
> >>>>>
> >>>>>You can always download and run SR 5.1 and install the SP1. 
> >>>>
> >>>>Although 6.1
> >>>>
> >>>>
> >>>>
> >>>>>should be fully backward compatible with 5.1.
> >>>>>
> >>>>>First set up 6.1 and run some sample programs. 
> >>>>
> >>>>Gc_basic_call_model is a good
> >>>>
> >>>>
> >>>>
> >>>>>one to try. And then try running bayonne.
> >>>>>
> >>>>>Regards,
> >>>>>
> >>>>>Ambar Roy
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>>-----Original Message-----
> >>>>>>From: Tony Stocker [mailto:[email protected]]
> >>>>>>Sent: Tuesday, July 26, 2005 2:21 AM
> >>>>>>To: [email protected]
> >>>>>>Subject: [Bayonne-devel] Intel Dialogic System Release 
> >>>>
> >>>>6.1 and Bayonne
> >>>>
> >>>>
> >>>>
> >>>>>>Hello All,
> >>>>>>
> >>>>>>We recently purchased an Intel Dialogic D/41-JCT-LS board and
the
> >>>>>>System Release 6.1 for Linux with the intention of 
> >>>>
> >>>>installing it for
> >>>>
> >>>>
> >>>>
> >>>>>>use with Bayonne.  However the documentation at
> >>>>>>http://www.gnu.org/software/bayonne/documentation.html 
> >>>>
> >>>>seems to refer
> >>>>
> >>>>
> >>>>
> >>>>>>only to version 5.1 and talks about needing three 
> >>>>
> >>>>different packages
> >>>>
> >>>>
> >>>>
> >>>>>>(Service Release, Service Pack, Feature Pack) and the CD that we
> >>>>>>received from Intel only seems to have one package on it.
> >>>>>>
> >>>>>>I'm curious to know if anyone has setup Bayonne with a 
> >>>>
> >>>>Dialogic board
> >>>>
> >>>>
> >>>>
> >>>>>>and the 6.1 system release.
> >>>>>>
> >>>>>>Thanks,
> >>>>>>
> >>>>>>Tony
> >>>>>>
> >>>>>>
> >>>>>>_______________________________________________
> >>>>>>Bayonne-devel mailing list
> >>>>>>[email protected]
> >>>>>>http://lists.gnu.org/mailman/listinfo/bayonne-devel
> >>>>>>
> >>>>>>
> >>>>>
> >>>>>
> >>>>_______________________________________________
> >>>>Bayonne-devel mailing list
> >>>>[email protected]
> >>>>http://lists.gnu.org/mailman/listinfo/bayonne-devel
> >>>>
> >>>>
> >>>
> >>>
> >>>
> >>>
> >>>_______________________________________________
> >>>Bayonne-devel mailing list
> >>>[email protected]
> >>>http://lists.gnu.org/mailman/listinfo/bayonne-devel


> _______________________________________________
> Bayonne-devel mailing list
> [email protected]
> http://lists.gnu.org/mailman/listinfo/bayonne-devel


--