Fwd: [[email protected]: libjit-0.0.2 failed on sparc64 5]

Hi,
I'm forwarding a failed build log from freebsd Sparc64.
Any clues in a fix?
Thanks,
	Michael

Begin forwarded message:

> From: Kris Kennaway <[email protected]>
> Date: May 21, 2004 8:10:17 PM EDT
> To: [email protected], [email protected]
> Subject: [ports-sparc64-d0FraeyCP1pJ/3MW0lBhkNi2O/[email protected]: libjit-0.0.2 failed on  
> sparc64 5]
>
> FYI; can you please investigate and/or report to the developers?
>
> Kris
>
> ----- Forwarded message from User Ports-sparc64  
> <ports-sparc64-d0FraeyCP1pJ/3MW0lBhkNi2O/[email protected]> -----
>
> X-Original-To: [email protected]
> Delivered-To: kkenn-bi+AKbBUZKZ/[email protected]
> Delivered-To: [email protected]
> Date: Fri, 21 May 2004 12:41:00 -0700 (PDT)
> From: User Ports-sparc64 <ports-sparc64-d0FraeyCP1pJ/3MW0lBhkNi2O/[email protected]>
> To: [email protected]
> Subject: libjit-0.0.2 failed on sparc64 5
> X-UIDL: >gb"!"a?!!ZTb"!2G1!!
> X-Bogosity: No, tests=bogofilter, spamicity=0.000000, version=0.17.5
>
> building libjit-0.0.2 on deo-ultra5
> in directory /x/tmp/5/chroot/23173
> with arguments: libjit-0.0.2.tbz /usr/ports/lang/libjit  
> expat-1.95.7.tbz gettext-0.13.1_1.tbz gmake-3.80_2.tbz  
> libiconv-1.9.1_3.tbz
> maintained by: [email protected]
> build started at Fri May 21 19:29:51 GMT 2004
> adding dependencies
> pkg_add expat-1.95.7.tbz
> pkg_add gettext-0.13.1_1.tbz
> pkg_add gmake-3.80_2.tbz
> pkg_add libiconv-1.9.1_3.tbz
> skipping libiconv-1.9.1_3, already added
> ================================================================
> ====================<phase 1: make checksum>====================
> ===>  Vulnerability check disabled
>>> libjit-0.0.2.tar.gz doesn't seem to exist in /tmp/distfiles/.
>>> Attempting to fetch from  
>>> ftp://ftp-master.freebsd.org/pub/FreeBSD/ports/distfiles//.
> fetch:  
> ftp://ftp-master.freebsd.org/pub/FreeBSD/ports/distfiles//libjit 
> -0.0.2.tar.gz: File unavailable (e.g., file not found, no access)
>>> Attempting to fetch from  
>>> ftp://bento.freebsd.org/pub/FreeBSD/distfiles//.
> fetch:  
> ftp://bento.freebsd.org/pub/FreeBSD/distfiles//libjit-0.0.2.tar.gz:  
> File unavailable (e.g., file not found, no access)
>>> Attempting to fetch from http://www.southern-storm.com.au/download/.
> libjit-0.0.2.tar.gz                                    189 kB  189 kBps
>>> Checksum OK for libjit-0.0.2.tar.gz.
> ====================<phase 2: make package>=====================
> ===>  Vulnerability check disabled
> ===>  Extracting for libjit-0.0.2
>>> Checksum OK for libjit-0.0.2.tar.gz.
> ===>  Patching for libjit-0.0.2
> ===>  Applying FreeBSD patches for libjit-0.0.2
> ===>   libjit-0.0.2 depends on executable: gmake - found
> ===>  Configuring for libjit-0.0.2
> creating cache ./config.cache
> checking host system type... sparc64-portbld-freebsd5.2
> checking target system type... sparc64-portbld-freebsd5.2
> checking build system type... sparc64-portbld-freebsd5.2
> checking for a BSD compatible install... /usr/bin/install -c -o root  
> -g wheel
> checking whether build environment is sane... yes
> checking whether gmake sets ${MAKE}... yes
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... found
> checking if building for some Win32 platform... no
> checking for gawk... no
> checking for mawk... no
> checking for nawk... nawk
> checking for gcc... cc
> checking whether the C compiler (cc -O -pipe  ) works... yes
> checking whether the C compiler (cc -O -pipe  ) is a cross-compiler...  
> no
> checking whether we are using GNU C... yes
> checking whether cc accepts -g... yes
> checking for c++... c++
> checking whether the C++ compiler (c++ -O -pipe ) works... yes
> checking whether the C++ compiler (c++ -O -pipe ) is a  
> cross-compiler... no
> checking whether we are using GNU C++... yes
> checking whether c++ accepts -g... yes
> checking for a BSD compatible install... /usr/bin/install -c -o root  
> -g wheel
> checking whether ln -s works... yes
> checking whether gmake sets ${MAKE}... (cached) yes
> checking for bison... no
> checking for byacc... byacc
> checking how to run the C preprocessor... cc -E
> checking for flex... flex
> checking for flex... (cached) flex
> checking for yywrap in -lfl... yes
> checking lex output file root... lex.yy
> checking whether yytext is a pointer... yes
> checking for ranlib... ranlib
> checking for ld used by GCC... /usr/bin/ld
> checking if the linker (/usr/bin/ld) is GNU ld... yes
> checking for BSD-compatible nm... /usr/bin/nm -B
> updating cache ./config.cache
> checking for object suffix... o
> checking for executable suffix... no
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions ... no
> checking if cc static flag -static works... -static
> checking if the linker (/usr/bin/ld) is GNU ld... yes
> checking whether the linker (/usr/bin/ld) supports shared libraries...  
> yes
> checking command to parse /usr/bin/nm -B output... ok
> checking how to hardcode library paths into programs... immediate
> checking for /usr/bin/ld option to reload object files... -r
> checking dynamic linker characteristics... freebsd5.2 ld.so
> checking if libtool supports shared libraries... yes
>
> *** Warning: the command libtool uses to detect shared libraries,
> *** /usr/bin/file, produces output that libtool cannot recognize.
> *** The result is that libtool may fail to recognize shared libraries
> *** as such.  This will affect the creation of libtool libraries that
> *** depend on shared libraries, but programs linked with such libtool
> *** libraries will work regardless of this problem.  Nevertheless, you
> *** may want to report the problem to your system manager and/or to
> *** bug-libtool-mXXj517/[email protected]
>
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking for objdir... .libs
> creating libtool
> loading cache ./config.cache
> checking for Cygwin environment... no
> checking for mingw32 environment... no
> checking for executable suffix... no
> checking for object suffix... o
> checking for ANSI C header files... yes
> checking for string.h... yes
> checking for strings.h... yes
> checking for memory.h... yes
> checking for stdlib.h... yes
> checking for stdarg.h... yes
> checking for varargs.h... no
> checking for tgmath.h... no
> checking for math.h... yes
> checking for ieeefp.h... yes
> checking for pthread.h... yes
> checking for unistd.h... yes
> checking for sys/types.h... yes
> checking for sys/mman.h... yes
> checking for fcntl.h... yes
> checking for dlfcn.h... yes
> checking for sys/cygwin.h... no
> checking for sys/stat.h... yes
> checking for working const... yes
> checking if char is unsigned... no
> checking size of char... 1
> checking size of short... 2
> checking size of int... 4
> checking size of long... 8
> checking size of long long... 8
> checking size of __int64... 0
> checking size of float... 4
> checking size of double... 8
> checking size of long double... 16
> checking size of void *... 8
> checking for the 8-bit integer types... char, unsigned char
> checking for the 16-bit integer types... short, unsigned short
> checking for the 32-bit integer types... int, unsigned int
> checking for the 64-bit integer types... long, unsigned long
> checking for the native integer types... long, unsigned long
> checking for the 32-bit floating-point type... float
> checking for the 64-bit floating-point type... double
> checking for the native floating-point type... long double
> checking for C++ exception handling option... none needed
> checking for C++ throw() idiom... yes
> checking for -fno-gcse option... yes
> checking for -lstdc++ option... yes
> checking for sin in -lm... yes
> checking for dlopen in -ldl... no
> checking for pthread_create in -lpthread... yes
> checking for 8-bit clean memcmp... yes
> checking for memset... yes
> checking for memcmp... yes
> checking for memchr... yes
> checking for memcpy... yes
> checking for memmove... yes
> checking for bcopy... yes
> checking for bzero... yes
> checking for bcmp... yes
> checking for strlen... yes
> checking for strcpy... yes
> checking for strcat... yes
> checking for strncpy... yes
> checking for strcmp... yes
> checking for strncmp... yes
> checking for strchr... yes
> checking for strrchr... yes
> checking for vsprintf... yes
> checking for vsnprintf... yes
> checking for _vsnprintf... no
> checking for getpagesize... yes
> checking for isnan... yes
> checking for isinf... yes
> checking for finite... yes
> checking for fmod... yes
> checking for remainder... yes
> checking for drem... yes
> checking for ceil... yes
> checking for floor... yes
> checking for acos... yes
> checking for asin... yes
> checking for atan... yes
> checking for atan2... yes
> checking for cos... yes
> checking for cosh... yes
> checking for exp... yes
> checking for log... yes
> checking for log10... yes
> checking for pow... yes
> checking for sin... yes
> checking for sinh... yes
> checking for sqrt... yes
> checking for tan... yes
> checking for tanh... yes
> checking for isnanf... yes
> checking for isinff... no
> checking for finitef... yes
> checking for fmodf... yes
> checking for remainderf... yes
> checking for dremf... yes
> checking for ceilf... yes
> checking for floorf... yes
> checking for acosf... yes
> checking for asinf... yes
> checking for atanf... yes
> checking for atan2f... yes
> checking for cosf... yes
> checking for coshf... yes
> checking for expf... yes
> checking for logf... yes
> checking for log10f... yes
> checking for powf... yes
> checking for sinf... yes
> checking for sinhf... yes
> checking for sqrtf... yes
> checking for tanf... yes
> checking for tanhf... yes
> checking for isnanl... no
> checking for isinfl... no
> checking for finitel... no
> checking for fmodl... no
> checking for remainderl... no
> checking for dreml... no
> checking for ceill... no
> checking for floorl... no
> checking for acosl... no
> checking for asinl... no
> checking for atanl... no
> checking for atan2l... no
> checking for cosl... no
> checking for coshl... no
> checking for expl... no
> checking for logl... no
> checking for log10l... no
> checking for powl... no
> checking for sinl... no
> checking for sinhl... no
> checking for sqrtl... no
> checking for tanl... no
> checking for tanhl... no
> checking for dlopen... yes
> checking for cygwin_conv_to_win32_path... no
> checking for mmap... yes
> checking for munmap... yes
> checking for mprotect... yes
> checking for working alloca.h... no
> checking for alloca... yes
> updating cache ./config.cache
> creating ./config.status
> creating Makefile
> creating include/Makefile
> creating include/jit/Makefile
> creating include/jit/jit-defs.h
> creating tools/Makefile
> creating jit/Makefile
> creating jitdynamic/Makefile
> creating jitplus/Makefile
> creating dpas/Makefile
> creating tutorial/Makefile
> creating tests/Makefile
> creating doc/Makefile
> creating config.h
> ===>  Building for libjit-0.0.2
> gmake  all-recursive
> gmake[1]: Entering directory  
> `/tmp/a/ports/lang/libjit/work/libjit-0.0.2'
> Making all in include
> gmake[2]: Entering directory  
> `/tmp/a/ports/lang/libjit/work/libjit-0.0.2/include'
> Making all in jit
> gmake[3]: Entering directory  
> `/tmp/a/ports/lang/libjit/work/libjit-0.0.2/include/jit'
> gmake[3]: Nothing to be done for `all'.
> gmake[3]: Leaving directory  
> `/tmp/a/ports/lang/libjit/work/libjit-0.0.2/include/jit'
> gmake[3]: Entering directory  
> `/tmp/a/ports/lang/libjit/work/libjit-0.0.2/include'
> gmake[3]: Nothing to be done for `all-am'.
> gmake[3]: Leaving directory  
> `/tmp/a/ports/lang/libjit/work/libjit-0.0.2/include'
> gmake[2]: Leaving directory  
> `/tmp/a/ports/lang/libjit/work/libjit-0.0.2/include'
> Making all in tools
> gmake[2]: Entering directory  
> `/tmp/a/ports/lang/libjit/work/libjit-0.0.2/tools'
> cc -DHAVE_CONFIG_H -I. -I. -I..    -I../include -I../include  
> 			-I../jit -I../jit -O -pipe  -Wall -c gen-apply.c
> /bin/sh ../libtool --mode=link cc -I../include -I../include  
> 			-I../jit -I../jit -O -pipe  -Wall  -o gen-apply  gen-apply.o   
> -lpthread -lm
> mkdir .libs
> cc -I../include -I../include -I../jit -I../jit -O -pipe -Wall -o  
> gen-apply gen-apply.o -lpthread -lm
> ./gen-apply >../jit/jit-apply-rules.h
> gmake[2]: Leaving directory  
> `/tmp/a/ports/lang/libjit/work/libjit-0.0.2/tools'
> Making all in jit
> gmake[2]: Entering directory  
> `/tmp/a/ports/lang/libjit/work/libjit-0.0.2/jit'
> /bin/sh ../libtool --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I..     
> -I../include -I../include -I. -I. -O -pipe  -Wall -c jit-alloc.c
> mkdir .libs
> cc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I. -I. -O  
> -pipe -Wall -Wp,-MD,.deps/jit-alloc.pp -c jit-alloc.c  -fPIC -DPIC -o  
> .libs/jit-alloc.lo
> cc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I. -I. -O  
> -pipe -Wall -Wp,-MD,.deps/jit-alloc.pp -c jit-alloc.c -o jit-alloc.o  
> >/dev/null 2>&1
> mv -f .libs/jit-alloc.lo jit-alloc.lo
> /bin/sh ../libtool --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I..     
> -I../include -I../include -I. -I. -O -pipe  -Wall -c jit-apply.c
> rm -f .libs/jit-apply.lo
> cc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I. -I. -O  
> -pipe -Wall -Wp,-MD,.deps/jit-apply.pp -c jit-apply.c  -fPIC -DPIC -o  
> .libs/jit-apply.lo
> jit-apply.c: In function `jit_apply_builder_add_arguments':
> jit-apply.c:262: error: stray '\' in program
> jit-apply.c:262: warning: implicit declaration of function `n'
> jit-apply.c:262: error: invalid type argument of `->'
> jit-apply.c:262: error: stray '\' in program
> jit-apply.c:262: error: syntax error before '}' token
> jit-apply.c:262: error: stray '\' in program
> jit-apply.c:262: error: `n' undeclared (first use in this function)
> jit-apply.c:262: error: (Each undeclared identifier is reported only  
> once
> jit-apply.c:262: error: for each function it appears in.)
> jit-apply.c:262: error: syntax error before '<' token
> jit-apply.c:262: error: `__split' undeclared (first use in this  
> function)
> jit-apply.c:262: error: syntax error before "else"
> jit-apply.c:262: error: `__size' undeclared (first use in this  
> function)
> jit-apply.c:262: error: `__num_words' undeclared (first use in this  
> function)
> jit-apply.c: At top level:
> jit-apply.c:266: error: syntax error before "break"
> jit-apply.c:75: warning: `jit_type_get_max_arg_size' defined but not  
> used
> jit-apply.c:157: warning: `jit_apply_builder_add_arguments' defined  
> but not used
> gmake[2]: *** [jit-apply.lo] Error 1
> gmake[2]: Leaving directory  
> `/tmp/a/ports/lang/libjit/work/libjit-0.0.2/jit'
> gmake[1]: *** [all-recursive] Error 1
> gmake[1]: Leaving directory  
> `/tmp/a/ports/lang/libjit/work/libjit-0.0.2'
> gmake: *** [all-recursive-am] Error 2
> *** Error code 2
>
> Stop in /a/ports/lang/libjit.
> ================================================================
> build ended at Fri May 21 19:40:50 GMT 2004
>
>
> ----- End forwarded message -----