bug#37625: [GNU Libtool 2.4.6] testsuite: 69 170 failed

Cody Logan <[email protected]>
Newsgroups gmane.comp.gnu.libtool.bugs
Message-ID <CADyhCKZLbbq6NgPD-hYTUKOO1r_g6ZL9W0q4P2V4xJBkTJX_6A@mail.gmail.com> 
This version was built against musl libc 1.1.23 using a cross-compiled
GCC 9.2.0.

Output of `gcc -v`:

Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-pc-linux-musl/9.2.0/lto-wrapper
Target: x86_64-pc-linux-musl
Configured with: ../configure --prefix=/usr --enable-languages=c,c++
--disable-multilib --disable-bootstrap --with-system-zlib
--disable-libsanitizer --build=x86_64-pc-linux-musl
Thread model: posix
gcc version 9.2.0 (GCC)

Details of test 69:

69. shlibpath.at:25: testing shlibpath_overrides_runpath ...
libtool: compile:  gcc -g -O2 -c a.c  -fPIC -DPIC -o .libs/a.o
libtool: compile:  gcc -g -O2 -c a.c -o a.o >/dev/null 2>&1
libtool: link: gcc -shared  -fPIC -DPIC  .libs/a.o    -g -O2
-Wl,-soname -Wl,liba.so.0 -o .libs/liba.so.0.0.0
libtool: link: (cd ".libs" && rm -f "liba.so.0" && ln -s
"liba.so.0.0.0" "liba.so.0")
libtool: link: (cd ".libs" && rm -f "liba.so" && ln -s "liba.so.0.0.0"
"liba.so")
libtool: link: ar cru .libs/liba.a  a.o
libtool: link: ranlib .libs/liba.a
libtool: link: ( cd ".libs" && rm -f "liba.la" && ln -s "../liba.la" "liba.la" )
libtool: install: cp .libs/liba.so.0.0.0
/sources/libtool-2.4.6/tests/testsuite.dir/069/sub/lib/liba.so.0.0.0
libtool: install: (cd
/sources/libtool-2.4.6/tests/testsuite.dir/069/sub/lib && { ln -s -f
liba.so.0.0.0 liba.so.0 || { rm -f liba.so.0 && ln -s liba.so.0.0.0
liba.so.0; }; })
libtool: install: (cd
/sources/libtool-2.4.6/tests/testsuite.dir/069/sub/lib && { ln -s -f
liba.so.0.0.0 liba.so || { rm -f liba.so && ln -s liba.so.0.0.0
liba.so; }; })
libtool: install: cp .libs/liba.lai
/sources/libtool-2.4.6/tests/testsuite.dir/069/sub/lib/liba.la
libtool: install: cp .libs/liba.a
/sources/libtool-2.4.6/tests/testsuite.dir/069/sub/lib/liba.a
libtool: install: chmod 644
/sources/libtool-2.4.6/tests/testsuite.dir/069/sub/lib/liba.a
libtool: install: ranlib
/sources/libtool-2.4.6/tests/testsuite.dir/069/sub/lib/liba.a
libtool: finish:
PATH="/sources/libtool-2.4.6/tests:/bin:/usr/bin:/sbin:/usr/sbin:/tools/bin:/sbin"
ldconfig -n /sources/libtool-2.4.6/tests/testsuite.dir/069/sub/lib
/sources/libtool-2.4.6/libtool: line 1737: ldconfig: command not found
----------------------------------------------------------------------
Libraries have been installed in:
   /sources/libtool-2.4.6/tests/testsuite.dir/069/sub/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator run these commands:


See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
libtool: clean: rm -f liba.la .libs/liba.so.0.0.0 .libs/liba.so.0
.libs/liba.so .libs/liba.a .libs/liba.la .libs/liba.lai
libtool: clean: rmdir .libs >/dev/null 2>&1
./shlibpath.at:39: $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o
m$EXEEXT m.$OBJEXT -Lsub/lib -la -R`pwd`/sub/lib
stderr:
stdout:
libtool: link: gcc -g -O2 -o m m.o  -Lsub/lib -la -Wl,-rpath
-Wl,/sources/libtool-2.4.6/tests/testsuite.dir/069/sub/lib
./shlibpath.at:41: $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o
m2$EXEEXT m.$OBJEXT -Lsub/lib -la
stderr:
stdout:
libtool: link: gcc -g -O2 -o m2 m.o  -Lsub/lib -la
libtool: compile:  gcc -g -O2 -c a.c  -fPIC -DPIC -o .libs/a.o
libtool: compile:  gcc -g -O2 -c a.c -o a.o >/dev/null 2>&1
libtool: link: gcc -shared  -fPIC -DPIC  .libs/a.o    -g -O2
-Wl,-soname -Wl,liba.so.0 -o .libs/liba.so.0.0.0
libtool: link: (cd ".libs" && rm -f "liba.so.0" && ln -s
"liba.so.0.0.0" "liba.so.0")
libtool: link: (cd ".libs" && rm -f "liba.so" && ln -s "liba.so.0.0.0"
"liba.so")
libtool: link: ar cru .libs/liba.a  a.o
libtool: link: ranlib .libs/liba.a
libtool: link: ( cd ".libs" && rm -f "liba.la" && ln -s "../liba.la" "liba.la" )
libtool: install: cp .libs/liba.so.0.0.0
/sources/libtool-2.4.6/tests/testsuite.dir/069/sub/lib/liba.so.0.0.0
libtool: install: (cd
/sources/libtool-2.4.6/tests/testsuite.dir/069/sub/lib && { ln -s -f
liba.so.0.0.0 liba.so.0 || { rm -f liba.so.0 && ln -s liba.so.0.0.0
liba.so.0; }; })
libtool: install: (cd
/sources/libtool-2.4.6/tests/testsuite.dir/069/sub/lib && { ln -s -f
liba.so.0.0.0 liba.so || { rm -f liba.so && ln -s liba.so.0.0.0
liba.so; }; })
libtool: install: cp .libs/liba.lai
/sources/libtool-2.4.6/tests/testsuite.dir/069/sub/lib/liba.la
libtool: install: cp .libs/liba.a
/sources/libtool-2.4.6/tests/testsuite.dir/069/sub/lib/liba.a
libtool: install: chmod 644
/sources/libtool-2.4.6/tests/testsuite.dir/069/sub/lib/liba.a
libtool: install: ranlib
/sources/libtool-2.4.6/tests/testsuite.dir/069/sub/lib/liba.a
libtool: finish:
PATH="/sources/libtool-2.4.6/tests:/bin:/usr/bin:/sbin:/usr/sbin:/tools/bin:/sbin"
ldconfig -n /sources/libtool-2.4.6/tests/testsuite.dir/069/sub/lib
/sources/libtool-2.4.6/libtool: line 1737: ldconfig: command not found
----------------------------------------------------------------------
Libraries have been installed in:
   /sources/libtool-2.4.6/tests/testsuite.dir/069/sub/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator run these commands:


See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
libtool: clean: rm -f liba.la .libs/liba.so.0.0.0 .libs/liba.so.0
.libs/liba.so .libs/liba.a .libs/liba.la .libs/liba.lai
libtool: clean: rmdir .libs >/dev/null 2>&1
./shlibpath.at:54: if "$lt_exe" || exit 1 && exit 77; then :; else
lt_status=$?;    test "$lt_status" != 1 &&    test "X$host" !=
"X$build" && test -x "$lt_exe" && exit 77;    exit $lt_status; fi
stderr:
Error relocating ./m: a: symbol not found
stdout:
./shlibpath.at:68: if "$lt_exe" || exit 1; then :; else lt_status=$?;
  test "$lt_status" != 1 &&    test "X$host" != "X$build" && test -x
"$lt_exe" && exit 77;    exit $lt_status; fi
stderr:
stdout:
./shlibpath.at:68: exit code was 0, expected 1
69. shlibpath.at:25: 69. shlibpath_overrides_runpath
(shlibpath.at:25): FAILED (shlibpath.at:68)

The full testsuite log is attached.

-Cody

_______________________________________________
Bug-libtool mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/bug-libtool
testsuite.log.gz (application/gzip, 20.1 KB) - not displayed
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.