[SCM] GNU Libtool branch, master, updated. v2.2.6-78-g9f55924

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU Libtool".

The branch, master has been updated
       via  9f559243e8d9c2cc161acfab7ee4d274c7c422c5 (commit)
      from  04790afe1388039a4f81a58d238727b5f704c8c9 (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit 9f559243e8d9c2cc161acfab7ee4d274c7c422c5
Author: Akim Demaille <[email protected]>
Date:   Mon Jan 19 09:05:31 2009 +0100

    Clean space uses.
    
    	* libtoolize.m4sh: Remove trailing spaces.
    	Use <tab><sp>, as some editors remove "useless" spaces in
    	<sp><tab>.

-----------------------------------------------------------------------

Summary of changes:
 ChangeLog       |    7 +++++++
 libtoolize.m4sh |   32 ++++++++++++++++----------------
 2 files changed, 23 insertions(+), 16 deletions(-)

diff --git a/ChangeLog b/ChangeLog
index 7443b1f..e823ff7 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,10 @@
+2009-01-28  Akim Demaille  <[email protected]>
+
+	Clean space uses.
+	* libtoolize.m4sh: Remove trailing spaces.
+	Use <tab><sp>, as some editors remove "useless" spaces in
+	<sp><tab>.
+
 2009-01-26  Peter Rosin  <[email protected]>
 
 	AWK is required, make sure it is set.
diff --git a/libtoolize.m4sh b/libtoolize.m4sh
index 8096440..27f17a7 100644
--- a/libtoolize.m4sh
+++ b/libtoolize.m4sh
@@ -181,7 +181,7 @@ all_pkgltdl_files="COPYING.LIB Makefile Makefile.in Makefile.inc Makefile.am REA
       --install|-i)	opt_install=: ;;
 
       --ltdl)		opt_ltdl=:
-      			if test "$#" -gt 0; then
+			if test "$#" -gt 0; then
 			  case $1 in
 			    -*)	;;
 			    *)	ltdldir=`$ECHO "$1" | $SED 's,/*$,,'`
@@ -194,7 +194,7 @@ all_pkgltdl_files="COPYING.LIB Makefile Makefile.in Makefile.inc Makefile.am REA
       --no-warn)	opt_warning=false ;;
 
       --nonrecursive|--non-recursive)
-      			ltdl_mode=nonrecursive
+			ltdl_mode=nonrecursive
 			;;
 
       --quiet|--automake|-q) # --automake is for 1.5 compatibility
@@ -310,7 +310,7 @@ func_copy_cb ()
     copy_return_status=1
 
     # Libtool is probably misinstalled if this happens:
-    test -f "$my_srcdir/$my_file" || 
+    test -f "$my_srcdir/$my_file" ||
         func_fatal_error "\`$my_file' not found in \`$my_srcdir'"
 
     case $opt_verbose in
@@ -374,7 +374,7 @@ func_copy_some_files ()
         if test "X$my_copy_cb" = Xfunc_copy_cb; then
 	  $opt_force || if test -f "$my_destdir/$my_filename"; then
 	    $opt_quiet || func_echo_once "$my_msg_var"
-  	    $opt_quiet \
+	    $opt_quiet \
 	      || func_error "\`$my_destdir/$my_filename' exists: use \`--force' to overwrite"
 	    continue
 	  fi
@@ -482,12 +482,12 @@ func_scan_files ()
         s,^.*AC_REQUIRE(.*$,,; s,^.*m4@&t@_require(.*$,,;
 	s,^.*m4@&t@_define(.*$,,
 	s,^.*A[CU]_DEFUN(.*$,,; s,^.*m4@&t@_defun(.*$,,
-    	/AC_CONFIG_AUX_DIR(/ {
-	    s,^.*AC_CONFIG_AUX_DIR([[ 	]*\([^])]*\).*$,ac_auxdir=\1,
+	/AC_CONFIG_AUX_DIR(/ {
+	    s,^.*AC_CONFIG_AUX_DIR([[	 ]*\([^])]*\).*$,ac_auxdir=\1,
 	    p
         }
-    	/AC_CONFIG_MACRO_DIR(/ {
-	    s,^.*AC_CONFIG_MACRO_DIR([[ 	]*\([^])]*\).*$,ac_macrodir=\1,
+	/AC_CONFIG_MACRO_DIR(/ {
+	    s,^.*AC_CONFIG_MACRO_DIR([[	 ]*\([^])]*\).*$,ac_macrodir=\1,
 	    p
         }
 	/_LT_CONFIG_LTDL_DIR(/d
@@ -502,14 +502,14 @@ func_scan_files ()
 	}
 	/the.*option into.*LT_INIT.*parameter/d
 	/\@<:@LT_INIT/d
-	/LT_INIT/	     	 {
+	/LT_INIT/		 {
 	    s,^.*$,seen_libtool=:,
 	    p
 	}
 	/\@<:@LTDL_INIT/d
 	/LTDL_INIT/          {
-	    s,^.*LTDL_INIT([[ 	]*\([^])]*\).*$,ltdl_options="\1",
-	    s,^.*LTDL_INIT[ 	]*$,seen_ltdl=:,
+	    s,^.*LTDL_INIT([[	 ]*\([^])]*\).*$,ltdl_options="\1",
+	    s,^.*LTDL_INIT[	 ]*$,seen_ltdl=:,
 	    p
 	}
 	/LT_WITH_LTDL/       {
@@ -633,8 +633,8 @@ func_scan_files ()
     # Hunt for ACLOCAL_AMFLAGS in `Makefile.am' for a `-I' argument.
 
     my_sed_aclocal_flags='
-        /^[ 	]*ACLOCAL_[A-Z_]*FLAGS[ 	]*=/ {
-	    s,^[^=]*=[ 	]*\(.*\), \1,
+        /^[	 ]*ACLOCAL_[A-Z_]*FLAGS[	 ]*=/ {
+	    s,^[^=]*=[	 ]*\(.*\), \1,
 	    q
 	}
 	d'
@@ -699,7 +699,7 @@ func_serial ()
     my_filename="$1"
     my_macro_regex="$2"
     my_sed_serial='
-	/^# serial [1-9][0-9.]*[ 	]*'"$my_macro_regex"'[ 	]*$/ {
+	/^# serial [1-9][0-9.]*[	 ]*'"$my_macro_regex"'[	 ]*$/ {
 	    s,^# serial \([1-9][0-9.]*\).*$,\1,
 	    q
 	}
@@ -980,7 +980,7 @@ func_ltmain_update ()
     $opt_debug
     my_sed_ltmain='
 	/^package_revision='\''*[0-9][1-9.]*'\''*/ {
-	    s,^package_revision='\''*\([0-9.]*\)'\''*[ 	]*$,\1,
+	    s,^package_revision='\''*\([0-9.]*\)'\''*[	 ]*$,\1,
 	    p
 	}
 	d'
@@ -1499,7 +1499,7 @@ func_check_macros ()
       else
         func_echo "Consider adding \`-I $macrodir' to ACLOCAL_AMFLAGS in Makefile.am."
       fi
-    fi 
+    fi
 
     # Don't trace for this, we're just checking the user didn't invoke it
     # directly from configure.ac.


hooks/post-receive
--
GNU Libtool