Re: inquiry make documentation on native windows

> ----- Original Message -----
> 
> From: "Ethan A Merritt" <[email protected]>
> To: "beta" <[email protected]>; "Tatsuro MATSUOKA" <[email protected]>
> Date: 2022/01/03 月 09:04
> Subject: Re: inquiry make documentation on native windows
> 
> 
> On Sunday, 2 January 2022 14:36:59 PST Tatsuro MATSUOKA wrote:
> > Ethan
> > 
> > Thank you for your reply again
> > 
> > Unfortunately the below patch gives a different error.
> > On MikTeX
> > 
> > (f:\programs\MiKTeX\tex/latex/tools\longtable.sty)
> > 
> > LaTeX Warning: \include should only be used after \begin{document} on input lin
> > e 42.
> 
> I have never seen that error message.
> Perhaps this is a difference between MiKTeX and TexLive?
> You could try changing the word "include" to "input" on line 42 of titlepag.tex
> 
>    % This is only needed if you want to embed figures
> -  \include{gpinsetfigure}
> +  \input{gpinsetfigure}

The change makes the warining disappeared 
but even if  the change does not apply, results are the same.


 
> 
> > (gpinsetfigure.tex
> > 
> > ! LaTeX Error: Command \gpinsetfigure already defined.
> >                Or name \end... illegal, see p.192 of the manual.
> 
> This one makes no sense to me.
> Please check the content of gpinsetfigure.tex
> It should look like this:
> 
> [~/git/gnuplot-main/docs] cat gpinsetfigure.tex
> \usepackage{graphicx}
> \usepackage{picins}
> \newcommand{\gpinsetfigure}[1]{
>   \parpic[r][rt]{\includegraphics[width=3in,keepaspectratio]{#1}}
> }
I found two type mistakes in your patch
Two "gpinsetfigures.tex" are found (not "gpinsetfigure.tex")

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
diff --git a/config/mingw/Makefile b/config/mingw/Makefile
index 3c578b27e..cc0adcce5 100644
--- a/config/mingw/Makefile
+++ b/config/mingw/Makefile
@@ -953,8 +953,11 @@ gnuplot.ps: gnuplot.dvi
 
 gnuplot.pdf: gnuplot-figures.tex $(TOP)/VERSION $(D)toc_entr.sty $(D)titlepag.tex
 	cp gnuplot-figures.tex gp_tex2.tex
-	echo "\usepackage{graphicx}" > pdffigures.tex
-	echo "\usepackage{picins}" >> pdffigures.tex
+	echo "\usepackage{graphicx}" > gpinsetfigures.tex  #  should be gpinsetfigure.tex
+	echo "\usepackage{picins}" >> gpinsetfigures.tex # should be gpinsetfigure.tex
+	echo "\newcommand{\gpinsetfigure}[1]{" >> gpinsetfigure.tex ; \
+	echo "  \parpic[r][rt]{\includegraphics[width=3in,keepaspectratio]{#1}}" >> gpinsetfigure.tex ; \
+	echo "}" >> gpinsetfigure.tex
 	# Call LaTeX three times to get the toc right.
 	TEXINPUTS=.:$(TOP):$(D):${TEXINPUTS}: pdflatex gp_tex2.tex
 	TEXINPUTS=.:$(TOP):$(D):${TEXINPUTS}: pdflatex gp_tex2.tex
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

After type mistakes are corrected, "make docs "with both MiKTeX and TeXLive on cygwin on native windows build are successful.

Please push corrected patch to the master branch.

Tatsuro





> There should be no "\end" in the file, and the definition of
> gpinsetfigure should appear only once.
> 
> 	Ethan
> 
> > See the LaTeX manual or LaTeX Companion for explanation.
> > Type  H <return>  for immediate help.
> >  ...
> > 
> > l.6 }
> > 
> > ?
> > 
> > On TeXLive on cygwin
> > 
> > (/usr/share/texmf-dist/tex/latex/tools/longtable.sty)
> > \@input{gpinsetfigure.aux}
> > (./gpinsetfigure.tex
> > 
> > ! LaTeX Error: Command \gpinsetfigure already defined.
> >                Or name \end... illegal, see p.192 of the manual.
> > 
> > See the LaTeX manual or LaTeX Companion for explanation.
> > Type  H <return>  for immediate help.
> >  ...
> > 
> > l.6 }
> > 
> > ?
> > 
> > 
> > Tatsuro
> > 
> > 
> > > ----- Original Message -----
> > > 
> >  
> > > On Sunday, 2 January 2022 05:20:28 PST Tatsuro MATSUOKA wrote:
> > > > Ethan
> > > > Thank you for your reply.
> > > > > 
> > > > I attached the above patch, situation will be better but is not complete yet,
> > > > I met the error below in both MikTeX on windows and TeXLive2021 on the cygwin64.
> > > > 
> > > > ****************************************************************************
> > > > (gpinsetfigure.tex
> > > > 
> > > > ! LaTeX Error: Command \gpinsetfigure already defined.
> > > >                Or name \end... illegal, see p.192 of the manual.
> > > 
> > > 
> > > I apologize.  The patch I gave was incomplete.
> > > It should also have changed the previous two lines in the Makefile.
> > > Here is a more complete patch:
> > > 
> > > 	Ethan
> > > 
> > > %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
> > > diff --git a/config/mingw/Makefile b/config/mingw/Makefile
> > > index 3c578b27e..cc0adcce5 100644
> > > --- a/config/mingw/Makefile
> > > +++ b/config/mingw/Makefile
> > > @@ -953,8 +953,11 @@ gnuplot.ps: gnuplot.dvi
> > >  
> > >  gnuplot.pdf: gnuplot-figures.tex $(TOP)/VERSION $(D)toc_entr.sty $(D)titlepag.tex
> > >  	cp gnuplot-figures.tex gp_tex2.tex
> > > -	echo "\usepackage{graphicx}" > pdffigures.tex
> > > -	echo "\usepackage{picins}" >> pdffigures.tex
> > > +	echo "\usepackage{graphicx}" > gpinsetfigures.tex
> > > +	echo "\usepackage{picins}" >> gpinsetfigures.tex
> > > +	echo "\newcommand{\gpinsetfigure}[1]{" >> gpinsetfigure.tex ; \
> > > +	echo "  \parpic[r][rt]{\includegraphics[width=3in,keepaspectratio]{#1}}" >> gpinsetfigure.tex ; \
> > > +	echo "}" >> gpinsetfigure.tex
> > >  	# Call LaTeX three times to get the toc right.
> > >  	TEXINPUTS=.:$(TOP):$(D):${TEXINPUTS}: pdflatex gp_tex2.tex
> > >  	TEXINPUTS=.:$(TOP):$(D):${TEXINPUTS}: pdflatex gp_tex2.tex
> > > %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
> > > 
> > > 
> > > 
> > > 
> > 
> > 
> 
> 
> 
> 



_______________________________________________
gnuplot-beta mailing list
[email protected]
Membership management via: https://lists.sourceforge.net/lists/listinfo/gnuplot-beta