Re: problem installing gnuplot
Ozan Kahramanogullari <[email protected]> Sat, 11 Jan 2025 15:53:04 +0100
| Newsgroups | gmane.comp.graphics.gnuplot.devel |
|---|---|
| Message-ID | <CAPiqqLnmi3svT+g0dQx-pNd0=X664y1WUmGbhPJheF_sVngYUg@mail.gmail.com> |
Thanks, Ethan, Unfortunately, it still doesn't work with a different error message. (See below.) It is not finding the qtcore. I have no idea what it is. I googled to find < https://sourceforge.net/p/gnuplot/bugs/2591/> but the pointers there do not provide a simple solution. Before messing up my system by installing some libraries, I thought it was a good idea to let you know as it seems like something you are familiar with. Best, Ozan make /Library/Developer/CommandLineTools/usr/bin/make all-recursive Making all in config make[2]: Nothing to be done for `all'. Making all in m4 make[2]: Nothing to be done for `all'. Making all in term make[2]: Nothing to be done for `all'. Making all in src Making timestamp.h /Library/Developer/CommandLineTools/usr/bin/make all-recursive Making all in wxterminal make[4]: Nothing to be done for `all'. Making all in qtterminal make[4]: Nothing to be done for `all'. depbase=`echo term.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/local/bin\" -DX11_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DQT_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DGNUPLOT_SHARE_DIR=\"/usr/local/share/gnuplot/6.1\" -DGNUPLOT_PS_DIR=\"/usr/local/share/gnuplot/6.1/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/local/share/gnuplot/6.1/js\" -DGNUPLOT_LUA_DIR=\"/usr/local/share/gnuplot/6.1/lua\" -DCONTACT=\" [email protected]\" -DHELPFILE=\"/usr/local/share/gnuplot/6.1/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DGNUPLOT_QT=\"`echo gnuplot_qt | sed 's,x,x,'`\" -DQTGNUPLOT_DATA_DIR=\"/usr/local/share/gnuplot/6.1/qt\" -I/usr/X11/include -g -O2 -MT term.o -MD -MP -MF $depbase.Tpo -c -o term.o term.c &&\ mv -f $depbase.Tpo $depbase.Po In file included from term.c:1214: In file included from ./term.h:187: *../term/x11.trm:1084:6: **warning: **'fork' is deprecated: Use posix_spawn or fork [-Wdeprecated-declarations]* 1084 | if (fork() == 0) { | * ^* */Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/unistd.h:604:1: note: *'fork' has been explicitly marked deprecated here 604 | __deprecated_msg("Use posix_spawn or fork") | *^* */Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/sys/cdefs.h:218:48: note: *expanded from macro '__deprecated_msg' 218 | #define __deprecated_msg(_msg) __attribute__((__deprecated__(_msg))) | * ^* 1 warning generated. depbase=`echo time.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/local/bin\" -DX11_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DQT_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DGNUPLOT_SHARE_DIR=\"/usr/local/share/gnuplot/6.1\" -DGNUPLOT_PS_DIR=\"/usr/local/share/gnuplot/6.1/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/local/share/gnuplot/6.1/js\" -DGNUPLOT_LUA_DIR=\"/usr/local/share/gnuplot/6.1/lua\" -DCONTACT=\" [email protected]\" -DHELPFILE=\"/usr/local/share/gnuplot/6.1/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DGNUPLOT_QT=\"`echo gnuplot_qt | sed 's,x,x,'`\" -DQTGNUPLOT_DATA_DIR=\"/usr/local/share/gnuplot/6.1/qt\" -I/usr/X11/include -g -O2 -MT time.o -MD -MP -MF $depbase.Tpo -c -o time.o time.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo unset.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/local/bin\" -DX11_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DQT_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DGNUPLOT_SHARE_DIR=\"/usr/local/share/gnuplot/6.1\" -DGNUPLOT_PS_DIR=\"/usr/local/share/gnuplot/6.1/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/local/share/gnuplot/6.1/js\" -DGNUPLOT_LUA_DIR=\"/usr/local/share/gnuplot/6.1/lua\" -DCONTACT=\" [email protected]\" -DHELPFILE=\"/usr/local/share/gnuplot/6.1/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DGNUPLOT_QT=\"`echo gnuplot_qt | sed 's,x,x,'`\" -DQTGNUPLOT_DATA_DIR=\"/usr/local/share/gnuplot/6.1/qt\" -I/usr/X11/include -g -O2 -MT unset.o -MD -MP -MF $depbase.Tpo -c -o unset.o unset.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo util.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/local/bin\" -DX11_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DQT_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DGNUPLOT_SHARE_DIR=\"/usr/local/share/gnuplot/6.1\" -DGNUPLOT_PS_DIR=\"/usr/local/share/gnuplot/6.1/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/local/share/gnuplot/6.1/js\" -DGNUPLOT_LUA_DIR=\"/usr/local/share/gnuplot/6.1/lua\" -DCONTACT=\" [email protected]\" -DHELPFILE=\"/usr/local/share/gnuplot/6.1/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DGNUPLOT_QT=\"`echo gnuplot_qt | sed 's,x,x,'`\" -DQTGNUPLOT_DATA_DIR=\"/usr/local/share/gnuplot/6.1/qt\" -I/usr/X11/include -g -O2 -MT util.o -MD -MP -MF $depbase.Tpo -c -o util.o util.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo util3d.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/local/bin\" -DX11_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DQT_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DGNUPLOT_SHARE_DIR=\"/usr/local/share/gnuplot/6.1\" -DGNUPLOT_PS_DIR=\"/usr/local/share/gnuplot/6.1/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/local/share/gnuplot/6.1/js\" -DGNUPLOT_LUA_DIR=\"/usr/local/share/gnuplot/6.1/lua\" -DCONTACT=\" [email protected]\" -DHELPFILE=\"/usr/local/share/gnuplot/6.1/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DGNUPLOT_QT=\"`echo gnuplot_qt | sed 's,x,x,'`\" -DQTGNUPLOT_DATA_DIR=\"/usr/local/share/gnuplot/6.1/qt\" -I/usr/X11/include -g -O2 -MT util3d.o -MD -MP -MF $depbase.Tpo -c -o util3d.o util3d.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo version.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/local/bin\" -DX11_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DQT_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DGNUPLOT_SHARE_DIR=\"/usr/local/share/gnuplot/6.1\" -DGNUPLOT_PS_DIR=\"/usr/local/share/gnuplot/6.1/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/local/share/gnuplot/6.1/js\" -DGNUPLOT_LUA_DIR=\"/usr/local/share/gnuplot/6.1/lua\" -DCONTACT=\" [email protected]\" -DHELPFILE=\"/usr/local/share/gnuplot/6.1/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DGNUPLOT_QT=\"`echo gnuplot_qt | sed 's,x,x,'`\" -DQTGNUPLOT_DATA_DIR=\"/usr/local/share/gnuplot/6.1/qt\" -I/usr/X11/include -g -O2 -MT version.o -MD -MP -MF $depbase.Tpo -c -o version.o version.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo voxelgrid.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/local/bin\" -DX11_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DQT_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DGNUPLOT_SHARE_DIR=\"/usr/local/share/gnuplot/6.1\" -DGNUPLOT_PS_DIR=\"/usr/local/share/gnuplot/6.1/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/local/share/gnuplot/6.1/js\" -DGNUPLOT_LUA_DIR=\"/usr/local/share/gnuplot/6.1/lua\" -DCONTACT=\" [email protected]\" -DHELPFILE=\"/usr/local/share/gnuplot/6.1/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DGNUPLOT_QT=\"`echo gnuplot_qt | sed 's,x,x,'`\" -DQTGNUPLOT_DATA_DIR=\"/usr/local/share/gnuplot/6.1/qt\" -I/usr/X11/include -g -O2 -MT voxelgrid.o -MD -MP -MF $depbase.Tpo -c -o voxelgrid.o voxelgrid.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo vplot.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/local/bin\" -DX11_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DQT_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DGNUPLOT_SHARE_DIR=\"/usr/local/share/gnuplot/6.1\" -DGNUPLOT_PS_DIR=\"/usr/local/share/gnuplot/6.1/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/local/share/gnuplot/6.1/js\" -DGNUPLOT_LUA_DIR=\"/usr/local/share/gnuplot/6.1/lua\" -DCONTACT=\" [email protected]\" -DHELPFILE=\"/usr/local/share/gnuplot/6.1/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DGNUPLOT_QT=\"`echo gnuplot_qt | sed 's,x,x,'`\" -DQTGNUPLOT_DATA_DIR=\"/usr/local/share/gnuplot/6.1/qt\" -I/usr/X11/include -g -O2 -MT vplot.o -MD -MP -MF $depbase.Tpo -c -o vplot.o vplot.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo watch.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/local/bin\" -DX11_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DQT_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DGNUPLOT_SHARE_DIR=\"/usr/local/share/gnuplot/6.1\" -DGNUPLOT_PS_DIR=\"/usr/local/share/gnuplot/6.1/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/local/share/gnuplot/6.1/js\" -DGNUPLOT_LUA_DIR=\"/usr/local/share/gnuplot/6.1/lua\" -DCONTACT=\" [email protected]\" -DHELPFILE=\"/usr/local/share/gnuplot/6.1/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DGNUPLOT_QT=\"`echo gnuplot_qt | sed 's,x,x,'`\" -DQTGNUPLOT_DATA_DIR=\"/usr/local/share/gnuplot/6.1/qt\" -I/usr/X11/include -g -O2 -MT watch.o -MD -MP -MF $depbase.Tpo -c -o watch.o watch.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo xdg.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/local/bin\" -DX11_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DQT_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DGNUPLOT_SHARE_DIR=\"/usr/local/share/gnuplot/6.1\" -DGNUPLOT_PS_DIR=\"/usr/local/share/gnuplot/6.1/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/local/share/gnuplot/6.1/js\" -DGNUPLOT_LUA_DIR=\"/usr/local/share/gnuplot/6.1/lua\" -DCONTACT=\" [email protected]\" -DHELPFILE=\"/usr/local/share/gnuplot/6.1/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DGNUPLOT_QT=\"`echo gnuplot_qt | sed 's,x,x,'`\" -DQTGNUPLOT_DATA_DIR=\"/usr/local/share/gnuplot/6.1/qt\" -I/usr/X11/include -g -O2 -MT xdg.o -MD -MP -MF $depbase.Tpo -c -o xdg.o xdg.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo qtterminal/qt_term.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ c++ -std=gnu++11 -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/local/bin\" -DX11_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DQT_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DGNUPLOT_SHARE_DIR=\"/usr/local/share/gnuplot/6.1\" -DGNUPLOT_PS_DIR=\"/usr/local/share/gnuplot/6.1/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/local/share/gnuplot/6.1/js\" -DGNUPLOT_LUA_DIR=\"/usr/local/share/gnuplot/6.1/lua\" -DCONTACT=\" [email protected]\" -DHELPFILE=\"/usr/local/share/gnuplot/6.1/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DGNUPLOT_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" -DGNUPLOT_QT=\"`echo gnuplot_qt | sed 's,x,x,'`\" -DQTGNUPLOT_DATA_DIR=\"/usr/local/share/gnuplot/6.1/qt\" -I/usr/X11/include -g -O2 -MT qtterminal/qt_term.o -MD -MP -MF $depbase.Tpo -c -o qtterminal/qt_term.o qtterminal/qt_term.cpp &&\ mv -f $depbase.Tpo $depbase.Po *qtterminal/qt_term.cpp:51:10: **fatal error: **'QtCore' file not found* 51 | #include <QtCore> | * ^~~~~~~~* 1 error generated. make[4]: *** [qtterminal/qt_term.o] Error 1 make[3]: *** [all-recursive] Error 1 make[2]: *** [all] Error 2 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 ======================= Ozan Kahramanoğulları, PhD ozan-k.com ======================= On Fri, 10 Jan 2025 at 19:44, Ethan A Merritt <[email protected]> wrote: > On Thursday, 9 January 2025 13:38:22 PST Ozan Kahramanogullari wrote: > > Hi, > > > > I am trying to install gnuplot following the instructions in the INSTALL > > file. > > > > I could run "./prepare" and "./configure" without problems but "make" > > failed with the error message below. > > > > I tried to debug the code, but it exceeded my capacity to do a quick > fix. I > > also checked online, but I could not find a solution. > > > > Can anyone help? > > > > I am using an M1 Mac, in case it is relevant. > > Yes, very relevant. > > First off, you can just ignore the warning that advises to use > posix_spawn() > instead of fork(). The real problem is "undeclared function 'rl_getc'". > > Gnuplot supports 3 alternative methods for terminal input. > The choice is made at build-time as part of the ./configure step. > 1) The gnu readline library, selected by > ./configure --with-readline=gnu > 2) The BSD editline library, selected by > ./configure --with-readline=bsd > 3) A minimal but functional input layer that can be selected by > ./configure --with-readline=builtin > > If you do not specify any of these options, the configure script will pick > one for you based on what it thinks it knows about the library support > on your system. I.e. first it will look for libreadline. If it doesn't > find that > it looks for libeditline. If it finds neither it will use the builtin > code. > > The problem is that MacOS provides a version of the BSD library with > a wrapper that makes it look like, or almost like, gnu readline. > I say "almost" because it does not provide 100% of the routines that > are present in gnu readline. I think what is happening in your case is > that the configure script thinks it has found the readline library on your > system so it selects all the readline-appropriate calling options. > But what it really found was the imitation readline wrapper for > libeditline. > That is normal for a Mac if you have not separately installed the "real" > readline library, and up until recently that was good enough for gnuplot. > > Recently gnuplot's input layer was modified to use an undocumented > feature of the editline wrapper so that it would be possible to support > UTF-8 encoded terminal input. This worked great on the machines I was > able to test, but an M1 Mac was not among those machines. I am guessing > that the wrapper provided on your machine does not provide a wrapper > for rl_getc(), or just as likely it does have such a routine but fails to > list it > in the "readline.h" header file that comes with the wrapper. > > Here is the relevant chunk of code from gnuplot's file .../src/term.c: > > > #if defined(HAVE_LIBREADLINE) > > > > #define raw() rl_prep_terminal(1) > > #define cook() rl_deprep_terminal() > > #define nextchar() rl_getc(stdin) > > > > #elif defined(HAVE_LIBEDITLINE) > > > > #define raw() rl_prep_terminal(1) > > #define cook() rl_deprep_terminal() > > #define nextchar() fgetc(stdin) > > > > #elif defined(READLINE) > > > > #define raw() set_termio() > > #define cook() reset_termio() > > #define nextchar() fgetc(stdin) > > > > #endif > > So, what can you do? > > - It is possible that specifying one of the three input options > explicitly to ./configure > rather than letting it default would make it work. > Certainly the builtin option should work. > > - I am guessing that editing chunk of code shown above so that all three > options say > #define nextchar() fgetc(stdin) > would be the correct solution for a system with > editline-masquerading-as-readline. > If you try that and it works, please let us know and we can try to teach > the configure > script how to handle that. Do you know if there is a compile-time symbol > defined > on your machine to indicate that it is an M1? That might be what we would > have to > look for. > > - I am also guessing that the "real" fix is to file a bug report against > the readline.h > header provided by Apple. But I'm not holding my breath on that one. > As I said, this is an undocumented option, and there may in fact be a > reason for that. > > Ethan > > > Best, > > Ozan > > > > ======================= > > Ozan Kahramanoğulları, PhD > > ozan-k.com > > ======================= > > > > (base) ozan@MBP-FVFGT17VQ05N gnuplot-gnuplot-main % make > > > > /Library/Developer/CommandLineTools/usr/bin/make all-recursive > > > > Making all in config > > > > make[2]: Nothing to be done for `all'. > > > > Making all in m4 > > > > make[2]: Nothing to be done for `all'. > > > > Making all in term > > > > make[2]: Nothing to be done for `all'. > > > > Making all in src > > > > Making timestamp.h > > > > /Library/Developer/CommandLineTools/usr/bin/make all-recursive > > > > Making all in wxterminal > > > > make[4]: Nothing to be done for `all'. > > > > Making all in qtterminal > > > > make[4]: Nothing to be done for `all'. > > > > depbase=`echo term.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ > > > > gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term > > -DBINDIR=\"/usr/local/bin\" > > -DX11_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" > > -DQT_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" > > -DGNUPLOT_SHARE_DIR=\"/usr/local/share/gnuplot/6.1\" > > -DGNUPLOT_PS_DIR=\"/usr/local/share/gnuplot/6.1/PostScript\" > > -DGNUPLOT_JS_DIR=\"/usr/local/share/gnuplot/6.1/js\" > > -DGNUPLOT_LUA_DIR=\"/usr/local/share/gnuplot/6.1/lua\" -DCONTACT=\" > > [email protected]\" > > -DHELPFILE=\"/usr/local/share/gnuplot/6.1/gnuplot.gih\" > > -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" > > -DGNUPLOT_DRIVER_DIR=\"/usr/local/libexec/gnuplot/6.1\" > -DGNUPLOT_QT=\"`echo > > gnuplot_qt | sed 's,x,x,'`\" > > -DQTGNUPLOT_DATA_DIR=\"/usr/local/share/gnuplot/6.1/qt\" > -I/usr/X11/include > > -g -O2 -MT term.o -MD -MP -MF $depbase.Tpo -c -o term.o term.c &&\ > > > > mv -f $depbase.Tpo $depbase.Po > > > > In file included from term.c:1214: > > > > In file included from ./term.h:187: > > > > *../term/x11.trm:1084:6: **warning: **'fork' is deprecated: Use > posix_spawn > > or fork [-Wdeprecated-declarations]* > > > > 1084 | if (fork() == 0) { > > > > | * ^* > > > > > */Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/unistd.h:604:1: > > note: *'fork' has been explicitly marked deprecated here > > > > 604 | __deprecated_msg("Use posix_spawn or fork") > > > > | *^* > > > > > */Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/sys/cdefs.h:218:48: > > note: *expanded from macro '__deprecated_msg' > > > > 218 | #define __deprecated_msg(_msg) > > __attribute__((__deprecated__(_msg))) > > > > | * ^* > > > > *term.c:1382:13: **error: **call to undeclared function 'rl_getc'; ISO > C99 > > and later do not support implicit function declarations > > [-Wimplicit-function-declaration]* > > > > 1382 | nextchar = nextchar(); > > > > | * ^* > > > > *term.c:1360:22: note: *expanded from macro 'nextchar' > > > > 1360 | #define nextchar() rl_getc(stdin) > > > > | * ^* > > > > 1 warning and 1 error generated. > > > > make[4]: *** [term.o] Error 1 > > > > make[3]: *** [all-recursive] Error 1 > > > > make[2]: *** [all] Error 2 > > > > make[1]: *** [all-recursive] Error 1 > > > > make: *** [all] Error 2 > > > > > -- > Ethan A Merritt > Department of Biochemistry > University of Washington, Seattle > > > _______________________________________________ gnuplot-beta mailing list [email protected] Membership management via: https://lists.sourceforge.net/lists/listinfo/gnuplot-beta