Re: RaspiOS - Scanimage 1.2.1 - esci-driver-problem

In addition to my post before - just testet with raspi os (64bit)
testsystem because of your packages - normaly I'm using the
32-bit-version on this raspi3 ...

Am 02.05.24 um 10:43 schrieb Christoph:
>
> Hi,
>
> ok, i tried it out, the installation works, but at least, the error
> with an "empty adf" is there as before ...
>
> scanimage -d escl:https://192.168.1.121:443 --source "ADF Duplex"
> --mode Lineart --resolution 300 --progress --
> format=png --batch --buffer-size=128
> scanimage: rounded value of resolution from 300 to 300
> scanimage: rounded value of br-x from 215.9 to 215.9
> scanimage: rounded value of br-y from 297.18 to 297.18
> Scanning infinity pages, incrementing by 1, numbering from 1
> Scanning page 1
> scanimage: sane_start: Document feeder out of documents
> Batch terminated, 0 pages scanned
>
> If I look which packages are installed, I got this output (here
> sane-utils):
>
> apt list sane-utils
> Auflistung… Fertig
> sane-utils/now 1.2.1-5test arm64  [Installiert,lokal]
> sane-utils/stable 1.2.1-2 armhf
>
> If I'm right, it is just installed your version - and for the other
> packages it looks similar
>
> Greetz, Christoph
>
>
> Am 02.05.24 um 10:10 schrieb [email protected]:
>> The archive supplied contains 4 folders:
>>
>> - src: contains the sources including the patch
>> - dbg : contains debugging symbols
>> - dev : development symbols
>> - bin : binary packages to install
>>
>> To update sane-backends, simply install the packages in the bin folder:
>>
>> # sudo apt install bin/*.deb
>>
>> To avoid breaking your OS, you need to use the native packaging
>> (debian package).
>> Avoid this type of installation :
>> # ./configure; make; make install
>>
>> Thierry
>>
>> Le 2024-05-02 06:43, Christoph a écrit :
>>> Hi
>>>
>>> Thank you for your support. At the moment I'm still struggling with the
>>> after-effects of the flu, so it may take me a little longer to react...
>>>
>>> You say to copy your patch into the bin folder - how should I
>>> understand
>>> this? Simply copying it into there should hardly work, there are no
>>> executable binaries in your archive, but various *.deb packages, should
>>> I install them on the Raspi?
>>>
>>> Greetz, Christoph
>>>
>>> Am 30.04.24 um 23:55 schrieb [email protected]:
>>>> I've added the patch that fixes the problem to your distribution's
>>>> package. You'll need to install the files in the bin folder.
>>>>
>>>> Download link : www.grosfichiers.com/8e6eHhqx9Pe
>>>>
>>>> Thierry
>>>>
>>>> Le 2024-04-30 18:08, Christoph a écrit :
>>>>> Hi,
>>>>>
>>>>> I tried to compile the v1.3, but it stop's during configure with an
>>>>> error:
>>>>>
>>>>> checking for pkg-config... /usr/bin/pkg-config
>>>>> checking pkg-config is at least version 0.9.0... yes
>>>>> ./configure: line 20920: syntax error near unexpected token `noext,'
>>>>> ./configure: line 20920: `AX_CXX_COMPILE_STDCXX_11(noext, optional)'
>>>>>
>>>>> I started building like this:
>>>>>
>>>>> ./autogen.sh
>>>>> ./configure --prefix=/usr --libdir=/usr/lib/arm-linux-gnueabihf
>>>>> --sysconfdir=/etc --localstatedir=/var  --enable-avahi
>>>>>
>>>>> Greetz
>>>>> Am 30.04.24 um 17:22 schrieb [email protected]:
>>>>>
>>>>>> Le 2024-04-30 15:00, Christoph via sane-devel a écrit :
>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> I've just installed a raspi3 with raspiOS32 based on debian
>>>>>>> bookworm.
>>>>>>>
>>>>>>> When I tried to scan with this command: scanimage -d
>>>>>>> escl:https://192.168.1.121:443 --source "ADF Duplex" --mode
>>>>>>> Lineart
>>>>>>> --resolution 300 --progress
>>>>>>>
>>>>>>> --format=png --batch --buffer-size=128
>>>>>>>
>>>>>>> come back like this:
>>>>>>>
>>>>>>> scanimage: rounded value of resolution from 300 to 300
>>>>>>> scanimage: rounded value of br-x from 215.9 to 215.9
>>>>>>> scanimage: rounded value of br-y from 297.18 to 297.18
>>>>>>> Scanning infinity pages, incrementing by 1, numbering from 1
>>>>>>> Scanning page 1
>>>>>>> scanimage: sane_start: Document feeder out of documents
>>>>>>> Batch terminated, 0 pages scanned
>>>>>>>
>>>>>>> Same command with same raspi but older raspios bullseye works as
>>>>>>> expected, but only with --format=png over all pages in ADF. There
>>>>>>> was
>>>>>>> used scanimage v1.0.31
>>>>>>>
>>>>>>> I'm using an EPSON XP-7100
>>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> This is solved, but you need to upgrade to sane-backend 1.3.
>>>>>>
>>>>>> Do you know how to build a debian package with the sources?
>>>>>>
>>>>>> Thierry
>>>>>>
>>>>>>> Greetz, Christoph