Re: brother MFC-295CN Xsane fails to detect scanner:
Ralph Little <[email protected]> Sun, 8 Feb 2026 21:49:44 -0800
| Newsgroups | gmane.comp.graphics.scanning.sane.devel |
|---|---|
| Message-ID | <CAFNXweN8_4-KE8kfnKSRaBUfmi3hwDXXags0fEW+kx32F5mp1A@mail.gmail.com> |
--0000000000006c9157064a5db567 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable Hi, I have not seen that issue before with Xsane. I know that sometimes people report that a window is tiny with nothing in it. I think that is usually related to a corrupted configuration file. Yeah, I've heard about the libusb issue. I believe Brother even say something about it in the driver instructions now. Xsane is well overdue a release and it is something that I am working on in the background. Cheers, Ralph On Sun, Feb 8, 2026 at 9:21=E2=80=AFPM Paul Graff <[email protected]> wrote: > Good to hear from you Ralph: > There were problems I have been working on and have gotten Xsane to work > now. It came down to installing the package libusb-0.1.so.4 . > > # ldd /usr/lib64/sane/libsane-brother3.so* > /usr/lib64/sane/libsane-brother3.so: > linux-vdso.so.1 (0x00007fedc351c000) > libpthread.so.0 =3D> /lib64/libpthread.so.0 (0x00007fedc34e9000) > libnsl.so.1 =3D> /lib64/libnsl.so.1 (0x00007fedc34e4000) > libusb-0.1.so.4 =3D> /lib64/libusb-0.1.so.4 (0x00007fedc34dc000) > libm.so.6 =3D> /lib64/libm.so.6 (0x00007fedc3205000) > libdl.so.2 =3D> /lib64/libdl.so.2 (0x00007fedc34d5000) > libc.so.6 =3D> /lib64/libc.so.6 (0x00007fedc2e00000) > /lib64/ld-linux-x86-64.so.2 (0x00007fedc351e000) > /usr/lib64/sane/libsane-brother3.so.1: > linux-vdso.so.1 (0x00007f2f1c902000) > libpthread.so.0 =3D> /lib64/libpthread.so.0 (0x00007f2f1c8cf000) > libnsl.so.1 =3D> /lib64/libnsl.so.1 (0x00007f2f1c8ca000) > libusb-0.1.so.4 =3D> /lib64/libusb-0.1.so.4 (0x00007f2f1c8c2000) > libm.so.6 =3D> /lib64/libm.so.6 (0x00007f2f1c605000) > libdl.so.2 =3D> /lib64/libdl.so.2 (0x00007f2f1c8bb000) > libc.so.6 =3D> /lib64/libc.so.6 (0x00007f2f1c200000) > /lib64/ld-linux-x86-64.so.2 (0x00007f2f1c904000) > /usr/lib64/sane/libsane-brother3.so.1.0.7: > linux-vdso.so.1 (0x00007f5a750f3000) > libpthread.so.0 =3D> /lib64/libpthread.so.0 (0x00007f5a750c0000) > libnsl.so.1 =3D> /lib64/libnsl.so.1 (0x00007f5a750bb000) > libusb-0.1.so.4 =3D> /lib64/libusb-0.1.so.4 (0x00007f5a750b3000) > libm.so.6 =3D> /lib64/libm.so.6 (0x00007f5a74e05000) > libdl.so.2 =3D> /lib64/libdl.so.2 (0x00007f5a750ac000) > libc.so.6 =3D> /lib64/libc.so.6 (0x00007f5a74a00000) > /lib64/ld-linux-x86-64.so.2 (0x00007f5a750f5000) > > # scanimage -L > device `brother3:bus4;dev2' is a Brother MFC-295CN USB scanner > > So I have a question now though. When launching Xsane GUI the > application window opens very small and cannot be resized in it's > Konsole window then. I must then move Xsane application and preview > windows to another workspace where then the application menu show up > legibly. Using KDE Plasma with Wayland for the Desktop Environment. Can > this issue be debugged and fixed? > > Here is a screenshot of what I am describing :< https://ibb.co/YTcF9DrB > > There is also an openSUSE Forums thread which I opened here :< > > https://forums.opensuse.org/t/brother-mfc-295cn-network-connected-printer= -fails-to-scan/191648/70 > > This led to the final ability for Xsane able to scan and detect the > MFC-295CN scanner. > > Thanks > > On 2/8/26 11:08 PM, Ralph Little wrote: > > Hi, > > This model was released around 2009 so it is one of the older machines. > > You really have two options at this point. > > > > 1) install Brother's scanner driver. They do have a Linux driver on > > their website that mostly works although they don't update them very > > often and some people have trouble on new distributions related to > > dependencies or in the case of Ubuntu derivatives, issues with the > > placement of libraries. > > > > 2) You could try our brother_mfp backend which is currently in > > development. For some people, it works good enough. It is USB only at > > this stage, but if you are interested I can help you set it up. Some > > details here: https://gitlab.com/sane-project/backends/-/ > > merge_requests/751 <https://gitlab.com/sane-project/backends/-/ > > merge_requests/751> > > Let me know. > > > > Cheers, > > Ralph > > > > On Sat, Feb 7, 2026 at 4:58=E2=80=AFPM Paul Graff via sane-devel <sane- > > [email protected] <mailto:sane-devel@alioth- > > lists.debian.net>> wrote: > > > > I am wondering if I could get some help debugging the following > output. > > The MFC-295CN has wonderful print but I simply cannot get it to sca= n. > > > > :~ # !2918 > > SANE_DEBUG_DLL=3D4 scanimage -L > > [18:34:54.946643] [sanei_debug] Setting debug level of dll to 4. > > [18:34:54.946865] [dll] sane_init: SANE dll backend version 1.0.13 > from > > sane-backends 1.2.1 > > [18:34:54.946930] [dll] sane_init/read_dlld: attempting to open > > directory `./dll.d' > > [18:34:54.946992] [dll] sane_init/read_dlld: attempting to open > > directory `/etc/sane.d/dll.d' > > [18:34:54.947067] [dll] sane_init/read_dlld: using config directory > > `/etc/sane.d/dll.d' > > [18:34:54.947156] [dll] add_backend: adding backend `hpaio' > > [18:34:54.947177] [dll] add_backend: adding backend `airscan' > > [18:34:54.947228] [dll] add_backend: adding backend `net' > > [18:34:54.947238] [dll] add_backend: adding backend `escl' > > [18:34:54.947261] [dll] add_backend: adding backend `genesys' > > [18:34:54.947286] [dll] add_backend: adding backend `brother3' > > [18:34:54.947329] [dll] sane_get_devices > > [18:34:54.947338] [dll] load: searching backend `brother3' in > > `/usr/lib64/sane' > > [18:34:54.947346] [dll] load: trying to load > > `/usr/lib64/sane/libsane-brother3.so.1' > > [18:34:54.947360] [dll] load: dlopen()ing > > `/usr/lib64/sane/libsane-brother3.so.1' > > [18:34:54.947670] [dll] load: dlopen() failed (libusb-0.1.so.4: > cannot > > open shared object file: No such file or directory) > > [18:34:54.947687] [dll] load: searching backend `genesys' in > > `/usr/lib64/sane' > > [18:34:54.947696] [dll] load: trying to load > > `/usr/lib64/sane/libsane-genesys.so.1' > > [18:34:54.947710] [dll] load: dlopen()ing > > `/usr/lib64/sane/libsane-genesys.so.1' > > [18:34:54.951153] [dll] init: initializing backend `genesys' > > [18:34:55.100366] [dll] init: backend `genesys' is version 1.0.0 > > [18:34:55.101524] [dll] load: searching backend `escl' in `/usr/ > > lib64/sane' > > [18:34:55.101572] [dll] load: trying to load > > `/usr/lib64/sane/libsane-escl.so.1' > > [18:34:55.101625] [dll] load: dlopen()ing > > `/usr/lib64/sane/libsane-escl.so.1' > > [18:34:55.144314] [dll] init: initializing backend `escl' > > [18:34:55.145657] [dll] init: backend `escl' is version 1.0.0 > > [18:34:56.161087] [dll] load: searching backend `net' in `/usr/ > > lib64/sane' > > [18:34:56.161160] [dll] load: trying to load > > `/usr/lib64/sane/libsane-net.so.1' > > [18:34:56.161234] [dll] load: dlopen()ing `/usr/lib64/sane/libsane- > > net.so.1' > > [18:34:56.167294] [dll] init: initializing backend `net' > > [18:34:56.184376] [dll] init: backend `net' is version 1.2.1 > > [18:35:02.353491] [dll] load: searching backend `airscan' in > > `/usr/lib64/sane' > > [18:35:02.353565] [dll] load: trying to load > > `/usr/lib64/sane/libsane-airscan.so.1' > > [18:35:02.353640] [dll] load: dlopen()ing > > `/usr/lib64/sane/libsane-airscan.so.1' > > [18:35:02.382769] [dll] init: initializing backend `airscan' > > [18:35:02.385931] [dll] init: backend `airscan' is version 1.0.0 > > [18:35:03.396824] [dll] load: searching backend `hpaio' in `/usr/ > > lib64/sane' > > [18:35:03.396898] [dll] load: trying to load > > `/usr/lib64/sane/libsane-hpaio.so.1' > > [18:35:03.396973] [dll] load: dlopen()ing > > `/usr/lib64/sane/libsane-hpaio.so.1' > > [18:35:03.401716] [dll] init: initializing backend `hpaio' > > [18:35:03.402156] [dll] init: backend `hpaio' is version 1.0.0 > > [18:35:03.424671] [dll] sane_get_devices: found 0 devices > > > > And: > > > > :/usr/lib64 # ls -lah | grep libnsl.so.1 > > lrwxrwxrwx. 1 root root 18 Feb 7 16:47 libnsl.so.1 -> /lib64/ > > libnsl.so.3 > > :/usr/lib64 # > > > > Is the MFC-295CN simply to old to be able to scan well anymore? > > -Thank you for any thoughts on this. > > > > --0000000000006c9157064a5db567 Content-Type: text/html; charset="UTF-8" Content-Transfer-Encoding: quoted-printable <div dir=3D"ltr"><div>Hi,</div><div>I have not seen that issue before with = Xsane. I know that sometimes people report that a window is tiny with nothi= ng in it.</div><div>I think that is usually related to a corrupted configur= ation file.</div><div><br></div><div>Yeah, I've heard about the libusb = issue. I believe Brother even say something about it in the driver instruct= ions now.</div><div><br></div><div>Xsane is well overdue a release and it i= s something that I am working on in the background.</div><div><br></div><di= v>Cheers,</div><div>Ralph</div></div><br><div class=3D"gmail_quote gmail_qu= ote_container"><div dir=3D"ltr" class=3D"gmail_attr">On Sun, Feb 8, 2026 at= 9:21=E2=80=AFPM Paul Graff <<a href=3D"mailto:[email protected]">pj.worl= [email protected]</a>> wrote:<br></div><blockquote class=3D"gmail_quote" style= =3D"margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding= -left:1ex">Good to hear from you Ralph:<br> There were problems I have been working on and have gotten Xsane to work <b= r> now. It came down to installing the package libusb-0.1.so.4 .<br> <br> # ldd /usr/lib64/sane/libsane-brother3.so*<br> /usr/lib64/sane/libsane-brother3.so:<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0linux-vdso.so.1 (0x00007fedc351c000)<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0libpthread.so.0 =3D> /lib64/libpthread= .so.0 (0x00007fedc34e9000)<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0libnsl.so.1 =3D> /lib64/libnsl.so.1 (0= x00007fedc34e4000)<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0libusb-0.1.so.4 =3D> /lib64/libusb-0.1= .so.4 (0x00007fedc34dc000)<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0libm.so.6 =3D> /lib64/libm.so.6 (0x000= 07fedc3205000)<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0libdl.so.2 =3D> /lib64/libdl.so.2 (0x0= 0007fedc34d5000)<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0libc.so.6 =3D> /lib64/libc.so.6 (0x000= 07fedc2e00000)<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0/lib64/ld-linux-x86-64.so.2 (0x00007fedc3= 51e000)<br> /usr/lib64/sane/libsane-brother3.so.1:<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0linux-vdso.so.1 (0x00007f2f1c902000)<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0libpthread.so.0 =3D> /lib64/libpthread= .so.0 (0x00007f2f1c8cf000)<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0libnsl.so.1 =3D> /lib64/libnsl.so.1 (0= x00007f2f1c8ca000)<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0libusb-0.1.so.4 =3D> /lib64/libusb-0.1= .so.4 (0x00007f2f1c8c2000)<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0libm.so.6 =3D> /lib64/libm.so.6 (0x000= 07f2f1c605000)<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0libdl.so.2 =3D> /lib64/libdl.so.2 (0x0= 0007f2f1c8bb000)<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0libc.so.6 =3D> /lib64/libc.so.6 (0x000= 07f2f1c200000)<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0/lib64/ld-linux-x86-64.so.2 (0x00007f2f1c= 904000)<br> /usr/lib64/sane/libsane-brother3.so.1.0.7:<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0linux-vdso.so.1 (0x00007f5a750f3000)<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0libpthread.so.0 =3D> /lib64/libpthread= .so.0 (0x00007f5a750c0000)<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0libnsl.so.1 =3D> /lib64/libnsl.so.1 (0= x00007f5a750bb000)<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0libusb-0.1.so.4 =3D> /lib64/libusb-0.1= .so.4 (0x00007f5a750b3000)<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0libm.so.6 =3D> /lib64/libm.so.6 (0x000= 07f5a74e05000)<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0libdl.so.2 =3D> /lib64/libdl.so.2 (0x0= 0007f5a750ac000)<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0libc.so.6 =3D> /lib64/libc.so.6 (0x000= 07f5a74a00000)<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0/lib64/ld-linux-x86-64.so.2 (0x00007f5a75= 0f5000)<br> <br> # scanimage -L<br> device `brother3:bus4;dev2' is a Brother MFC-295CN USB scanner<br> <br> So I have a question now though. When launching Xsane GUI the <br> application window opens very small and cannot be resized in it's <br> Konsole window then. I must then move Xsane application and preview <br> windows to another workspace where then the application menu show up <br> legibly. Using KDE Plasma with Wayland for the Desktop Environment. Can <br= > this issue be debugged and fixed?<br> <br> Here is a screenshot of what I am describing :< <a href=3D"https://ibb.c= o/YTcF9DrB" rel=3D"noreferrer" target=3D"_blank">https://ibb.co/YTcF9DrB</a= ><br> <br> There is also an openSUSE Forums thread which I opened here :< <br> <a href=3D"https://forums.opensuse.org/t/brother-mfc-295cn-network-connecte= d-printer-fails-to-scan/191648/70" rel=3D"noreferrer" target=3D"_blank">htt= ps://forums.opensuse.org/t/brother-mfc-295cn-network-connected-printer-fail= s-to-scan/191648/70</a> <br> <br> This led to the final ability for Xsane able to scan and detect the <br> MFC-295CN scanner.<br> <br> Thanks<br> <br> On 2/8/26 11:08 PM, Ralph Little wrote:<br> > Hi,<br> > This model was released around 2009 so it is one of the older machines= .<br> > You really have two options at this point.<br> > <br> > 1) install Brother's scanner driver. They do have a Linux driver o= n <br> > their website that mostly works although they don't update them ve= ry <br> > often and some people have trouble on new distributions related to <br= > > dependencies or in the case of Ubuntu derivatives, issues with the <br= > > placement of libraries.<br> > <br> > 2) You could try our brother_mfp backend which is currently in <br> > development. For some people, it works good enough. It is USB only at = <br> > this stage, but if you are interested I can help you set it up. Some <= br> > details here: <a href=3D"https://gitlab.com/sane-project/backends/-/" = rel=3D"noreferrer" target=3D"_blank">https://gitlab.com/sane-project/backen= ds/-/</a> <br> > merge_requests/751 <<a href=3D"https://gitlab.com/sane-project/back= ends/-/" rel=3D"noreferrer" target=3D"_blank">https://gitlab.com/sane-proje= ct/backends/-/</a> <br> > merge_requests/751><br> > Let me know.<br> > <br> > Cheers,<br> > Ralph<br> > <br> > On Sat, Feb 7, 2026 at 4:58=E2=80=AFPM Paul Graff via sane-devel <s= ane- <br> > <a href=3D"mailto:[email protected]" target=3D"_blank">dev= [email protected]</a> <mailto:<a href=3D"mailto:sane-devel@alio= th-" target=3D"_blank">sane-devel@alioth-</a> <br> > <a href=3D"http://lists.debian.net" rel=3D"noreferrer" target=3D"_blan= k">lists.debian.net</a>>> wrote:<br> > <br> >=C2=A0 =C2=A0 =C2=A0I am wondering if I could get some help debugging t= he following output.<br> >=C2=A0 =C2=A0 =C2=A0The MFC-295CN has wonderful print but I simply cann= ot get it to scan.<br> > <br> >=C2=A0 =C2=A0 =C2=A0:~ # !2918<br> >=C2=A0 =C2=A0 =C2=A0SANE_DEBUG_DLL=3D4 scanimage -L<br> >=C2=A0 =C2=A0 =C2=A0[18:34:54.946643] [sanei_debug] Setting debug level= of dll to 4.<br> >=C2=A0 =C2=A0 =C2=A0[18:34:54.946865] [dll] sane_init: SANE dll backend= version 1.0.13 from<br> >=C2=A0 =C2=A0 =C2=A0sane-backends 1.2.1<br> >=C2=A0 =C2=A0 =C2=A0[18:34:54.946930] [dll] sane_init/read_dlld: attemp= ting to open<br> >=C2=A0 =C2=A0 =C2=A0directory `./dll.d'<br> >=C2=A0 =C2=A0 =C2=A0[18:34:54.946992] [dll] sane_init/read_dlld: attemp= ting to open<br> >=C2=A0 =C2=A0 =C2=A0directory `/etc/sane.d/dll.d'<br> >=C2=A0 =C2=A0 =C2=A0[18:34:54.947067] [dll] sane_init/read_dlld: using = config directory<br> >=C2=A0 =C2=A0 =C2=A0`/etc/sane.d/dll.d'<br> >=C2=A0 =C2=A0 =C2=A0[18:34:54.947156] [dll] add_backend: adding backend= `hpaio'<br> >=C2=A0 =C2=A0 =C2=A0[18:34:54.947177] [dll] add_backend: adding backend= `airscan'<br> >=C2=A0 =C2=A0 =C2=A0[18:34:54.947228] [dll] add_backend: adding backend= `net'<br> >=C2=A0 =C2=A0 =C2=A0[18:34:54.947238] [dll] add_backend: adding backend= `escl'<br> >=C2=A0 =C2=A0 =C2=A0[18:34:54.947261] [dll] add_backend: adding backend= `genesys'<br> >=C2=A0 =C2=A0 =C2=A0[18:34:54.947286] [dll] add_backend: adding backend= `brother3'<br> >=C2=A0 =C2=A0 =C2=A0[18:34:54.947329] [dll] sane_get_devices<br> >=C2=A0 =C2=A0 =C2=A0[18:34:54.947338] [dll] load: searching backend `br= other3' in<br> >=C2=A0 =C2=A0 =C2=A0`/usr/lib64/sane'<br> >=C2=A0 =C2=A0 =C2=A0[18:34:54.947346] [dll] load: trying to load<br> >=C2=A0 =C2=A0 =C2=A0`/usr/lib64/sane/libsane-brother3.so.1'<br> >=C2=A0 =C2=A0 =C2=A0[18:34:54.947360] [dll] load: dlopen()ing<br> >=C2=A0 =C2=A0 =C2=A0`/usr/lib64/sane/libsane-brother3.so.1'<br> >=C2=A0 =C2=A0 =C2=A0[18:34:54.947670] [dll] load: dlopen() failed (libu= sb-0.1.so.4: cannot<br> >=C2=A0 =C2=A0 =C2=A0open shared object file: No such file or directory)= <br> >=C2=A0 =C2=A0 =C2=A0[18:34:54.947687] [dll] load: searching backend `ge= nesys' in<br> >=C2=A0 =C2=A0 =C2=A0`/usr/lib64/sane'<br> >=C2=A0 =C2=A0 =C2=A0[18:34:54.947696] [dll] load: trying to load<br> >=C2=A0 =C2=A0 =C2=A0`/usr/lib64/sane/libsane-genesys.so.1'<br> >=C2=A0 =C2=A0 =C2=A0[18:34:54.947710] [dll] load: dlopen()ing<br> >=C2=A0 =C2=A0 =C2=A0`/usr/lib64/sane/libsane-genesys.so.1'<br> >=C2=A0 =C2=A0 =C2=A0[18:34:54.951153] [dll] init: initializing backend = `genesys'<br> >=C2=A0 =C2=A0 =C2=A0[18:34:55.100366] [dll] init: backend `genesys'= is version 1.0.0<br> >=C2=A0 =C2=A0 =C2=A0[18:34:55.101524] [dll] load: searching backend `es= cl' in `/usr/<br> >=C2=A0 =C2=A0 =C2=A0lib64/sane'<br> >=C2=A0 =C2=A0 =C2=A0[18:34:55.101572] [dll] load: trying to load<br> >=C2=A0 =C2=A0 =C2=A0`/usr/lib64/sane/libsane-escl.so.1'<br> >=C2=A0 =C2=A0 =C2=A0[18:34:55.101625] [dll] load: dlopen()ing<br> >=C2=A0 =C2=A0 =C2=A0`/usr/lib64/sane/libsane-escl.so.1'<br> >=C2=A0 =C2=A0 =C2=A0[18:34:55.144314] [dll] init: initializing backend = `escl'<br> >=C2=A0 =C2=A0 =C2=A0[18:34:55.145657] [dll] init: backend `escl' is= version 1.0.0<br> >=C2=A0 =C2=A0 =C2=A0[18:34:56.161087] [dll] load: searching backend `ne= t' in `/usr/<br> >=C2=A0 =C2=A0 =C2=A0lib64/sane'<br> >=C2=A0 =C2=A0 =C2=A0[18:34:56.161160] [dll] load: trying to load<br> >=C2=A0 =C2=A0 =C2=A0`/usr/lib64/sane/libsane-net.so.1'<br> >=C2=A0 =C2=A0 =C2=A0[18:34:56.161234] [dll] load: dlopen()ing `/usr/lib= 64/sane/libsane-<br> >=C2=A0 =C2=A0 =C2=A0net.so.1'<br> >=C2=A0 =C2=A0 =C2=A0[18:34:56.167294] [dll] init: initializing backend = `net'<br> >=C2=A0 =C2=A0 =C2=A0[18:34:56.184376] [dll] init: backend `net' is = version 1.2.1<br> >=C2=A0 =C2=A0 =C2=A0[18:35:02.353491] [dll] load: searching backend `ai= rscan' in<br> >=C2=A0 =C2=A0 =C2=A0`/usr/lib64/sane'<br> >=C2=A0 =C2=A0 =C2=A0[18:35:02.353565] [dll] load: trying to load<br> >=C2=A0 =C2=A0 =C2=A0`/usr/lib64/sane/libsane-airscan.so.1'<br> >=C2=A0 =C2=A0 =C2=A0[18:35:02.353640] [dll] load: dlopen()ing<br> >=C2=A0 =C2=A0 =C2=A0`/usr/lib64/sane/libsane-airscan.so.1'<br> >=C2=A0 =C2=A0 =C2=A0[18:35:02.382769] [dll] init: initializing backend = `airscan'<br> >=C2=A0 =C2=A0 =C2=A0[18:35:02.385931] [dll] init: backend `airscan'= is version 1.0.0<br> >=C2=A0 =C2=A0 =C2=A0[18:35:03.396824] [dll] load: searching backend `hp= aio' in `/usr/<br> >=C2=A0 =C2=A0 =C2=A0lib64/sane'<br> >=C2=A0 =C2=A0 =C2=A0[18:35:03.396898] [dll] load: trying to load<br> >=C2=A0 =C2=A0 =C2=A0`/usr/lib64/sane/libsane-hpaio.so.1'<br> >=C2=A0 =C2=A0 =C2=A0[18:35:03.396973] [dll] load: dlopen()ing<br> >=C2=A0 =C2=A0 =C2=A0`/usr/lib64/sane/libsane-hpaio.so.1'<br> >=C2=A0 =C2=A0 =C2=A0[18:35:03.401716] [dll] init: initializing backend = `hpaio'<br> >=C2=A0 =C2=A0 =C2=A0[18:35:03.402156] [dll] init: backend `hpaio' i= s version 1.0.0<br> >=C2=A0 =C2=A0 =C2=A0[18:35:03.424671] [dll] sane_get_devices: found 0 d= evices<br> > <br> >=C2=A0 =C2=A0 =C2=A0And:<br> > <br> >=C2=A0 =C2=A0 =C2=A0:/usr/lib64 # ls -lah | grep libnsl.so.1<br> >=C2=A0 =C2=A0 =C2=A0lrwxrwxrwx. 1 root root=C2=A0 =C2=A0 18 Feb=C2=A0 7= 16:47 libnsl.so.1 -> /lib64/<br> >=C2=A0 =C2=A0 =C2=A0libnsl.so.3<br> >=C2=A0 =C2=A0 =C2=A0:/usr/lib64 #<br> > <br> >=C2=A0 =C2=A0 =C2=A0Is the MFC-295CN simply to old to be able to scan w= ell anymore?<br> >=C2=A0 =C2=A0 =C2=A0-Thank you for any thoughts on this.<br> > <br> <br> </blockquote></div> --0000000000006c9157064a5db567--