Re: Help with Sony Clie PEG-SJ33/E

Beirne Konarski <[email protected]> Sat, 3 May 2003 07:29:40 -0400

Newsgroups	gmane.comp.handhelds.clie.linux
Message-ID	<[email protected]>

On Saturday 03 May 2003 06:49 am, James Mears wrote:
> > have you compiled your own kernel? or are you using a
> > stock?
>
> Just using stock as installed kernel for SuSE 8.2
> If I need to compile my own what specific modules do I need?

You need to have visor and usbserial loaded, which you appear to have.  I 
found that I needed ttyUSB0 to sync.  The final thing is that you may need to 
sync with jpilot once after booting before using pilot-link.  I still have to 
that with my SJ33.  For some reason jpilot does something when it syncs that 
allows pilot-link to work.  Make sure you are using current versions of both 
programs.  Use "-p usb:/dev/pilot", assuming /dev/pilot is linked to the 
ttyUSB0 in the pilot-xfer command line.

Also, start the hotsync on the Clie before starting pilot-xfer.

Beirne

>
> Thanks
>
> James

_______________________________________________
clie-linux mailing list
[email protected]
http://kreucher.net/mailman/listinfo/clie-linux

Sony CliÃ© and Linux Homepage:
http://kreucher.net/clie/