Re: [newbie] 560 series
"Michael Kaye" <[email protected]>
| Newsgroups | gmane.comp.handhelds.linux.jornada |
|---|---|
| Message-ID | <[email protected]> |
That's excellent news that you'll be able to spend some more time on it. :-) Can I read into that, that the code for the 56x (with the uda1341) will be pretty much the same as that for the 720? IOW, can I assume that the 56x does indeed have the SA-1111 companion chip? I would be very willing to help. I just need OE to fetch and patch everything without a problem. Would I use "0.8.4" as the version to get your latest code? Michael. On 13/07/06, Alex Lange <[email protected]> wrote: > Hello, > > I will have some free time in two weeks and will then try to get the sound > going. > In fact, the uda1344 is already working and playback is just fine, but the L3 > serial bus, which controls the volume etc... is not yet working so we don't > here much out of the speaker. > If someone wants to help out you're very welcome. > > kind regards, > Alex > > On Thursday 13 July 2006 14:30, Michael Kaye wrote: > > > What kind of processor does the 560 have? If it is anything like the 710 > > > that I have, then the advice on > > > http://www.lowlevel.cz/log/pivot/entry.php?id=41 might be useful. It > > > recommends using madplay as it doesn't use the FPU, which keeps processor > > > usage down. Even then, there isn't much you can do while listening to > > > music. > > > > The 560 has the same processor as the 720. In fact, the spec is very > > similar. The display controller is different, and runs at a different > > resolution. But the rest is very similar, apart from the fact that the > > sound uses the uda1341, rather than the uda1344. > > > > Alex Lange mentions that the "1341 != 1344" somewhere else on this > > forum I think, which is the reason sound isn't ready on the 560 > > series. I'm not sure just how different they are. The 720 uses an > > SA-1111 "companion chip" to interface with the uda1344; I have found > > it difficult to confirm whether the 560 series has such a chip. If it > > doesn't, that may be another reason that sound support is more > > difficult. > > > > The H3600 IPAQ also seems to have remarkably similar hardware, down to > > the uda1341. And, in fact, the H3600 doesn't have the companion chip. > > > > Anyway, that link you sent seems to have some good advice, and will > > probably come in useful. :-) > > > > > Oggs tend to require a bit more processor (and therefor battery) power. > > > This is certainly noticeable with my Samsung Yepp. > > > > I guess I'll just have to see how it goes. I'd really rather stick to > > Oggs, both for patent reasons, and audio quality reasons. Maybe I'll > > end up optimizing the Ogg decoder. ;-) > > > > > Good luck with getting sound to work. > > > > Thanks, I might need it. ;-) > > > > Michael. > > _______________________________________________ > > jornada mailing list > > [email protected] > > https://handhelds.org/mailman/listinfo/jornada > _______________________________________________ > jornada mailing list > [email protected] > https://handhelds.org/mailman/listinfo/jornada >