Re: How to install Familiar on a Jornada 720
"Kristoffer Ericson" <[email protected]>
| Newsgroups | gmane.comp.handhelds.linux.jornada |
|---|---|
| Message-ID | <[email protected]> |
Just some reflections :) >From: Swithun Crowe <[email protected]> >To: Pablo Manuel Rizzo <[email protected]> >CC: [email protected] >Subject: Re: [jornada] How to install Familiar on a Jornada 720 >Date: Tue, 12 Sep 2006 23:27:30 +0100 (BST) > >Hello > >PMR Hi there, what do I need in order to install familiar linux in my >PMR j720? Where do I get a howto, the familiar images, etc? Is it usable >PMR or experimental? = Familiar linux doesnt have support for the 7xx in their latest release (please correct me if Im wrong). > >The first thing is to get a 512Mb CompactFlash card. You can get a smaller >one, but you mustn't get a bigger one (I think) or it won't be recognised >(or the excess won't be). = Wrong... Although we cannot be sure about the exact limit, theres no problem what so ever with 2GB cards (and probobly anything up to 8GB will work fine) > >Then, there are quite a few HOWTOs around. I used: > >http://radiolivre.org/darksnow/jornada/ >http://www.lowlevel.cz/log/pivot/entry.php?id=41 > >and links from these pages. Searching for "jornada 720 familiar linux" >will get you all the help you need. > >You probably want to follow the instructions for no flashboard, which >means a 2.4.X kernel is the best choice at the moment. = We got a good 2.6 kernel now. Its faster, more dependable and with better support. So lets use is. Michaels 2.4 patches are good though. > > >From what I remember, you partition the card into a small FAT partition >and a large EXT2 partition. Then you copy some files (bootloader, kernel, >initrd) onto the FAT partition. Then you unpack a distro on the EXT2 >partition. Then you are ready to rock. > >Without a PCMCIA wireless card, the Jornada isn't up to much. You will >need a 16bit one: Zcom XI-325 PCMCIA Wireless LAN PC Card, which you can >get for less that 30 euros. You need to have a file >/etc/modutils/orinoco_cs.conf which says: > >options orinoco_cs ignore_cis_vcc=1 > >for the card to work. > >I would get the GPE version of Familiar. Then if you don't like it, you >can try OPIE, or get the barebones version and track down a WM that is >compiled for ARM/Familiar. > >Hope some of this helps. > >Swithun. >_______________________________________________ >jornada mailing list >[email protected] >https://handhelds.org/mailman/listinfo/jornada