can't run 0.8.4
"Andrew Mungons" <[email protected]> Wed, 15 Aug 2007 11:22:30 -0500
| Newsgroups | gmane.comp.handhelds.linux.jornada |
|---|---|
| Message-ID | <[email protected]> |
--===============0761180162== Content-Type: multipart/alternative; boundary="----=_Part_53698_26007235.1187194950837" ------=_Part_53698_26007235.1187194950837 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline It appears that familiar 0.8.4 does not work on jornadas. I have a 568 and every time i upload the image ymodem and type "boot" I get the following: booting jffs2... booting boot/zImage from partition >root< Scanning all of flash for your JFFS2 convenience. Est Time: 6-12 seconds! build_list: max = 01FBFFBC .. dir entries = 000009C2 frag entries = 000021FE +4 increments = 00000000 +file_offset increments = 00002BF8 loaded file of size = 0x0009C1CC at location 0xC0008000 kernel partition base C0008000 kernel_magic=E1A00000 kernel_region_words[9]=016F2818 Linux ELF flash_imgstart=50040000 size=01FC0000 dest=C0000000 offset=00008000 MMU Control=C19F4071 MMU PIDVAM=00000000 Skipping kernel copy by request. C0008000: E1A00000 C0008004: E1A00000 C0008008: E1A00000 C000800C: E1A00000 C0008010: E1A00000 C0008014: E1A00000 C0008018: E1A00000 C000801C: E1A00000 C0008020: EA000002 C0008024: 016F2818 root_filesystem_name=ramdisk Grabbed linuxargs, argc = 00000001 Using mach_type 000000A7 setting boot parameters to root=/dev/mtdblock1 init=/linuxrc noinitrd console=none mdcnfg=B264B267 Making core tag at C0000100 Making cmdline tag at C0000114 Making mem32 tag at C00001B4 command line is: mtdparts=ipaq:0x00040000@0x00000000(bootldr)ro, 0x01FC0000@0x00 linuxEntryPoint=C0008000 Booting Linux image Uncompressing Linux........................................... done, booting th. It always stops right there. I have tried multiple images, both gpe and opie, and even going back and trying rc3 but to no avail. Is this problem being worked on, or is there a way for me to get a 0.8.2image? ------=_Part_53698_26007235.1187194950837 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline It appears that familiar 0.8.4 does not work on jornadas. I have a 56= 8 and every time i upload the image ymodem and type "boot" I get = the following:<br><br>booting jffs2... &= nbsp; &nbs= p; &= nbsp; &nbs= p; &= nbsp; =20 <br>booting boot/zImage from partition >root< = &nb= sp; = <br>Scanning all of = flash for your JFFS2 convenience. Est Time: 6-12 seconds! = <br>build_list: max =3D 01FBFFBC = &nb= sp; = &nb= sp; =20 <br>.. &nb= sp; = &nb= sp; = &nb= sp; = <br>dir entries =3D 000009C2 &nbs= p; &= nbsp; &nbs= p; &= nbsp; &nbs= p; <br>frag entries =3D 000021FE &= nbsp; &nbs= p; &= nbsp; &nbs= p; &= nbsp;=20 <br>+4 increments =3D 00000000 &nb= sp; = &nb= sp; = <br>+file_offs= et increments =3D 00002BF8 &= nbsp; &nbs= p; &= nbsp; <br= >loaded file of size =3D 0x0009C1CC at location 0xC0008000  = ; &n= bsp; =20 <br>kernel partition base C0008000  = ; &n= bsp;  = ; &n= bsp; <br>kernel_magic=3DE1A00000 &= nbsp; &nbs= p; &= nbsp; &nbs= p; &= nbsp; <br>kernel_region_words[9]=3D016F2818 &n= bsp;  = ; &n= bsp;  = ; =20 <br>Linux ELF flash_imgstart=3D50040000 size=3D01FC0000 dest=3DC0000000 off= set=3D00008000 <br>MMU Control=3DC19F4071 &nbs= p; &= nbsp; &nbs= p; &= nbsp; &nbs= p; <br>MMU PIDVAM=3D00000000  = ; &n= bsp;  = ; &n= bsp;  = ; =20 <br>Skipping kernel copy by request. &nb= sp; = &nb= sp; = <br>C0008000: E1A00000 &nbs= p; &= nbsp; &nbs= p; &= nbsp; &nbs= p; <br>C0008004: E1A00000 &n= bsp;  = ; &n= bsp;  = ; &n= bsp; =20 <br>C0008008: E1A00000  = ; &n= bsp;  = ; &n= bsp;  = ; <br>C000800C: E1A00000 &nb= sp; = &nb= sp; = &nb= sp; <br>C0008010: E1A00000 &= nbsp; &nbs= p; &= nbsp; &nbs= p; &= nbsp; =20 <br>C0008014: E1A00000  = ; &n= bsp;  = ; &n= bsp;  = ; <br>C0008018: E1A00000 &nb= sp; = &nb= sp; = &nb= sp; <br>C000801C: E1A00000 &= nbsp; &nbs= p; &= nbsp; &nbs= p; &= nbsp; =20 <br>C0008020: EA000002  = ; &n= bsp;  = ; &n= bsp;  = ; <br>C0008024: 016F2818 &nb= sp; = &nb= sp; = &nb= sp; <br>root_filesystem_name=3Dramdisk &= nbsp; &nbs= p; &= nbsp; &nbs= p; =20 <br>Grabbed linuxargs, argc =3D 00000001  = ; &n= bsp;  = ; &n= bsp; <br>Using mach_type 000000A7 = &nb= sp; = &nb= sp; <br>s= etting boot parameters to &n= bsp;  = ; &n= bsp;  = ; =20 <br>root=3D/dev/mtdblock1 init=3D/linuxrc noinitrd console=3Dnone &nbs= p; &= nbsp; <br>mdcnfg=3DB2= 64B267 &nb= sp; = &nb= sp; = &nb= sp; <br>Making core tag at C0000100 &nbs= p; &= nbsp; &nbs= p; &= nbsp; =20 <br>Making cmdline tag at C0000114  = ; &n= bsp;  = ; &n= bsp; <br>Making mem32 tag at C00001B4 &n= bsp;  = ; &n= bsp;  = ; <br>com= mand line is: mtdparts=3Dipaq:0x00040000@0x00000000 (bootldr)ro,0x01FC0000@0x00 <br>linuxEntryPoint=3DC0008000  = ; &n= bsp;  = ; &n= bsp;  = ; <br>Booting Linux image &n= bsp;  = ; &n= bsp;  = ; &n= bsp; <br>Uncompressing Linux.............................= .............. done, booting th. <br><br>It always stops right there. I have tried multiple images, both gpe= and opie, and even going back and trying rc3 but to no avail.<br><br>Is th= is problem being worked on, or is there a way for me to get a 0.8.2 image? <br><br> ------=_Part_53698_26007235.1187194950837-- --===============0761180162== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ jornada mailing list [email protected] https://handhelds.org/mailman/listinfo/jornada --===============0761180162==--