FW: [Openzaurus-users] custom rom

I'm trying to test the new GPE packages and matchbox 0.9 on my zaurus SL-5600. maybe I'm going to get an answer to my issue on these lists...

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of
Bompart Cedric
Sent: mardi 11 janvier 2005 12:04
To: [email protected]
Subject: RE: [Openzaurus-users] custom rom


After further test, I think the kernel is working, I can suspend/resume using the "cancel" button.
So how can debug my rootfs? I've plugged a serial console but I don't get any output from the Z...

Here is my local.conf:

DL_DIR = "${HOME}/oe/sources"
BBFILES := "${HOME}/oe/openembedded/packages/*/*.bb"
BBMASK = ""
PREFERRED_PROVIDERS = "virtual/qte:qte-for-opie virtual/libqpe:libqpe-opie"
PREFERRED_PROVIDERS += " virtual/libsdl:libsdl-qpe"
PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial"
PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc:gcc-cross"
PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}g++:gcc-cross"
IMAGE_FSTYPES = "jffs2 tar"
BBINCLUDELOGS = "yes"
MACHINE = "poodle"
ASSUMED_PROVIDED = "virtual/arm-linux-gcc-2.95"
DISTRO = "openzaurus-ced"


And my new distro file:

include conf/distro/openzaurus.conf
DISTRO = "openzaurus"
DISTRO_NAME = "OpenZaurus"
DISTRO_VERSION = "3.5.2-snapshot-${DATE}"
FEED_URIS += " \
	upgrades##http://openzaurus.org/official/unstable/3.5.3/upgrades \
	base##http://openzaurus.org/official/unstable/3.5.3/feed/base \
	libs##http://openzaurus.org/official/unstable/3.5.3/feed/libs \
	console##http://openzaurus.org/official/unstable/3.5.3/feed/console \
	devel##http://openzaurus.org/official/unstable/3.5.3/feed/devel"
CVSDATE = "20050103"
ASSUME_PROVIDED = "virtual/arm-linux-gcc-2.95"
PREFERRED_PROVIDERS = "virtual/qte:qte-for-opie virtual/libqpe:libqpe-opie"
PREFERRED_PROVIDERS += " virtual/xserver:xserver-kdrive"
PREFERRED_PROVIDERS += " virtual/libsdl:libsdl-x11"
PREFERRED_PROVIDERS += " gst-plugins:gpe-gst-plugins"
PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial"
PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc:gcc-cross"
PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}g++:gcc-cross"
OEINCLUDELOGS = "yes"
KERNEL_CONSOLE = "tty1"
TARGET_FPU = "soft"
CVSDATE_ipkg-utils-native = "20041215"
PREFERRED_VERSION_binutils-cross = "2.15.91.0.2"
PREFERRED_VERSION_libtool-native = "1.5.6"
PREFERRED_VERSION_libtool-cross= "1.5.6"
PREFERRED_VERSION_orinoco-modules = "0.13e"
PREFERRED_VERSION_glibc = "2.3.2+cvs20040726"
PREFERRED_VERSION_wlan-ng-modules = "0.2.1pre22"
PREFERRED_VERSION_bluez-utils-dbus = "2.13"
PREFERRED_VERSION_libmatchbox = "1.5"
PREFERRED_VERSION_matchbox = "0.9"
PREFERRED_VERSION_matchbox-common = "0.9"
PREFERRED_VERSION_matchbox-desktop = "0.9"
PREFERRED_VERSION_matchbox-wm = "0.9"
PREFERRED_VERSION_matchbox-panel = "0.9"
PREFERRED_VERSION_matchbox-applet-inputmanager = "0.6"
PREFERRED_VERSION_gtk+ = "2.6.0"
PREFERRED_VERSION_xprop = "0.0cvs${CVSDATE}"
PREFERRED_VERSION_xhost = "0.0cvs20040413"
PREFERRED_VERSION_xrdb = "0.0cvs${CVSDATE}"
PREFERRED_VERSION_matchbox-panel-manager = "0.1"
PREFERRED_VERSION_matchbox-panel-hacks = "0.3-1"
PREFERRED_VERSION_rosetta = "0.0cvs${CVSDATE}"
PREFERRED_VERSION_minimo = "0.0cvs${CVSDATE}"


This distro "should" give you the latest gpe packages and the new matchbox 0.9. Let me know if I can get a better updated packages version.

.... but the main issue is where is gpe???? :-(

Ced.

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of
Bompart Cedric
Sent: mardi 11 janvier 2005 08:52
To: [email protected]
Subject: [Openzaurus-users] custom rom


Hi,

I've successfully built a new rootfs of OZ GPE 3.5.x for my SL-5600 including matchbox 0.9 and updated gpe packages (I've created a custom distro from openzarurus 3.5.3 and familiar 0.8.1).

It's the first time I'm using OE so please don't flame me... :-)

I've got the following under "tmp/deploy/images":
	-rw-r--r--  1 cedric users 13352960 Jan 10 16:07 gpe-image-poodle-20050110141435.rootfs.jffs2.bin
	-rw-r--r--  1 cedric users   984364 Jan 10 15:57 zImage-poodle-20050110141435.bin

I've renamed the two files to "zImage" and "initrd.bin" and flash them using the SL-5600 updater.sh from the OZ 3.5.2 release.
After a success flash, I'm getting the following during the boot process and that's it... no GPE... :-(

	RAMDISK: Couldn't find valid RAM disk image starting at 0.
	Freeing: initrd memory: 4096K
	VFS: Mounted root (jffs2 filesystem).
	Freeing init memory: 84K

The goal of this custom rom was to test the new updated packages and the SL-5600 kernel without the cache bug errata enabled.
Previously this, I've got the OZ GPE 3.5.2 release running perfectly...

Regards,
Ced.



-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Openzaurus-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openzaurus-users


-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Openzaurus-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openzaurus-users