Re: Opie features on a qtek 9000

This is a multi-part message in MIME format.
--------------050106080908070402050402
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: quoted-printable

Hi Ron,
GPRS is supported on the HTC Universal (Qtek 9000), but it needs to be
initialized.
the phone is only supported by the development version of the Qtopia4.
I don't think opie will ever have a phone app.

at the end there is an extract of the irc #htc-linux from 19.01.2008=20
that tells u how to enable it.

Btw: is the hinge working? (rotating the screen does rotate the opie=20
desktop too?) I made a patch some time ago to better support the=20
Universal, but opie ml was kind of dead at the time, and I don't think=20
it never got into the cvs.

I'm attaching the patch and the keymap, though I don't know if it will=20
apply or not.
Also a keymap to better support keys...

Alessandro

[sab gen 19 2008] [13:03:08] <goxboxlive>	ymerejt: hi
[sab gen 19 2008] [13:03:12] <ymerejt>	hi
[sab gen 19 2008] [13:03:28] <ymerejt>	goxboxlive, have you ever=20
successfully used GPRS on uni ?
[sab gen 19 2008] [13:03:33] <goxboxlive>	ymerejt:
[sab gen 19 2008] [13:03:34] <goxboxlive>	yes
[sab gen 19 2008] [13:03:40] <goxboxlive>	i have had it running
[sab gen 19 2008] [13:03:42] <ymerejt>	with qtopia ?
[sab gen 19 2008] [13:03:51] <goxboxlive>	ymerejt: no, manually setup
[sab gen 19 2008] [13:04:03] <ymerejt>	ok could you tell me more ?
[sab gen 19 2008] [13:04:53] <goxboxlive>	############## OPEN CU AND DO=20
####################################################
[sab gen 19 2008] [13:04:53] <goxboxlive>	atv1
[sab gen 19 2008] [13:04:53] <goxboxlive>	ate1
[sab gen 19 2008] [13:04:53] <goxboxlive>	at+cfun=3D1
[sab gen 19 2008] [13:04:53] <goxboxlive>	at+cops=3D0
[sab gen 19 2008] [13:04:53] <goxboxlive>	at+cops?
[sab gen 19 2008] [13:04:55] <goxboxlive>	#wait until it give some=20
respond, then
[sab gen 19 2008] [13:04:57] <goxboxlive>	at@usbpower=3D1
[sab gen 19 2008] [13:04:59] <goxboxlive>	############# THEN GO BACK TO=20
CONSOLE IN ANOTHER VIEW ###########################
[sab gen 19 2008] [13:05:01] <goxboxlive>	bash# modprobe usbserial=20
vendor=3D0x05c6 product=3D0x3197
[sab gen 19 2008] [13:05:05] <goxboxlive>	############# GO BACK TO CU=20
#####################################################
[sab gen 19 2008] [13:05:07] <goxboxlive>=20
at+cgdcont=3D1,"IP","internet.tele2.no","",0,0 OR=20
at+cgdcont=3D1,"IP","internet.tele2.no"
[sab gen 19 2008] [13:05:10] <goxboxlive>	atdt*99***1#
[sab gen 19 2008] [13:05:11] <goxboxlive>	############# GO BACK TO=20
CONSOLE ################################################
[sab gen 19 2008] [13:05:13] <goxboxlive>	bash#: pon tele2
[sab gen 19 2008] [13:05:15] <goxboxlive>	and then : try ifconfig and=20
look for ppp0
[sab gen 19 2008] [13:05:17] <goxboxlive>=20
#########################################################################=
#######
[sab gen 19 2008] [13:05:29] Entra	Vinz0r =E8 entrato nel canale=20
([email protected]).
[sab gen 19 2008] [13:07:04] <goxboxlive>	and tele2 looks like:=20
http://pastebin.ca/863270
[sab gen 19 2008] [13:07:17] <goxboxlive>	This is how i did it manually
[sab gen 19 2008] [13:07:58] <goxboxlive>	For me i have to use this one:=20
at+cgdcont=3D1,"IP","internet.tele2.no","",0,0 and NOT liek this:=20
at+cgdcont=3D1,"IP","internet.tele2.no"
[sab gen 19 2008] [13:08:01] <ymerejt>	and the data stream use ttyUSB0=20
and the AT dialog ttyS0
[sab gen 19 2008] [13:08:15] <goxboxlive>	ymerejt: rigth
[sab gen 19 2008] [13:08:27] <goxboxlive>	and you get a /dev/pppo
[sab gen 19 2008] [13:09:11] <ymerejt>	qtopia does not emit any AT=20
command when I ask it to enable GPRS ...
[sab gen 19 2008] [13:09:38] <goxboxlive>	ok
[sab gen 19 2008] [13:10:45] <goxboxlive>	ls
[sab gen 19 2008] [13:11:59] Esci	rob_w|laptop ha lasciato questo server=20
(Read error: 110 (Connection timed out)).
[sab gen 19 2008] [13:13:14] <ymerejt>	goxboxlive, but I think I have to=20
work on the myul
[sab gen 19 2008] [13:13:18] <ymerejt>	multiplexer plugin
[sab gen 19 2008] [13:13:37] <goxboxlive>	ok


Ron Rademaker ha scritto:
> Hi,
>=20
> I'm running opie on a qtek 9000 and so far I really like opie. However,=
=20
> there are some things the qtek 9000 device supports but as far as I kno=
w=20
> opie doesn't. Unfortunately, those things are pretty much why I bought=20
> the thing in the first place so getting them to work is essential. I=20
> think all the stuff I want is supported by the linux kernel but just=20
> lacks some application so I would expect it to be solvable somehow. Wan=
t=20
> I want to get working is a GPRS connection to the internet (for ssh=20
> connections and e-mail) over the simcard I've put into the device. It=20
> would be nice to also have phone support but this is not essential at a=
ll.
> Anyone knows if this is possible and if yes, how to make it happen?
>=20
> Thanks,
> Ron
>=20
> _______________________________________________
> Open Source User Interface and Apps built on Qt Embedded
> Opie mailing list
> [email protected]
> https://handhelds.org/mailman/listinfo/opie


--------------050106080908070402050402
Content-Type: text/plain;
 name="new-keymap-2.6.map"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="new-keymap-2.6.map"

#altgr keycode 18 = euro
altgr keycode 15 = tilde
altgr keycode 24 = slash
altgr keycode 25 = backslash
altgr keycode 32 = pound
altgr keycode 37 = quotedbl
altgr keycode 38 = apostrophe
altgr keycode 50 = question
altgr keycode 51 = semicolon
altgr keycode 52 = colon
keycode 212 = F15
keycode 167 = F16
keycode 115 = F17
keycode 114 = F18

--------------050106080908070402050402
Content-Type: text/x-patch;
 name="odevice_htc-hinge_buttons.patch"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="odevice_htc-hinge_buttons.patch"

diff -ur libopie2.org/opiecore/device/odevice_htc.cpp libopie2/opiecore/device/odevice_htc.cpp
--- libopie2.org/opiecore/device/odevice_htc.cpp	2007-05-02 12:15:39.000000000 +0200
+++ libopie2/opiecore/device/odevice_htc.cpp	2007-05-02 12:16:01.000000000 +0200
@@ -104,16 +104,23 @@
     "devicebuttons/z_mail",
     "opiemail", "raise()",
     "opiemail", "newMail()" },
+/* 212 */
+    { Qt::Key_F15, QT_TRANSLATE_NOOP("Button", "Camera Button"),
+    "devicebuttons/z_camera",
+    "sysinfo", "raise()" },
+/* 167 */    
+    { Qt::Key_F16,  QT_TRANSLATE_NOOP("Button", "Record Button"),
+    "devicebuttons/z_record",
+    "QPE/VMemo", "toggleRecord()" },
+/* 115 */
+    { Qt::Key_F17, QT_TRANSLATE_NOOP("Button", "VolumeUp Button"),
+    "devicebuttons/z_volumeup",
+    },
+/* 114 */
+    { Qt::Key_F18, QT_TRANSLATE_NOOP("Button", "VolumeDown Button"),
+    "devicebuttons/z_volumedown",
+    },
 
-    { Qt::Key_F15, QT_TRANSLATE_NOOP("Button", "Hinge1"),
-    "devicebuttons/z_hinge1",
-    "QPE/Rotation", "rotateDefault()",0,0},
-    { Qt::Key_F16, QT_TRANSLATE_NOOP("Button", "Hinge2"),
-    "devicebuttons/z_hinge2",
-    "QPE/Rotation", "rotateDefault()",0,0},
-    { Qt::Key_F17, QT_TRANSLATE_NOOP("Button", "Hinge3"),
-    "devicebuttons/z_hinge3",
-    "QPE/Rotation", "rotateDefault()",0,0},
 };
 
 
@@ -200,7 +207,8 @@
     switch( d->m_model )
     {
         case Model_HTC_Universal:
-            initHingeSensor();
+/*            initHingeSensor(); */
+            m_hinge.initialized = 0;
             d->m_rotation = rotation();
             d->m_direction = direction();
             break;
@@ -466,6 +474,9 @@
 
 OHingeStatus HTC::readHingeSensor() const
 {
+
+  if (!m_hinge.initialized)
+    initHingeSensor();
         /*
          * The HTC Universal keyboard is event source 1 in kernel 2.6.
          * Hinge status is reported via Input System Switchs 0 and 1 like that:
@@ -473,14 +484,14 @@
          * -------------------------
          * | SW0 | SW1 |    CASE   |
          * |-----|-----|-----------|
-         * |  0     0    Unknown   |
-         * |  1     0    Portrait  |
-         * |  0     1    Closed    |
-         * |  1     1    Landscape |
+         * |  0     0    Landscape |
+         * |  1     0    Closed    |
+         * |  0     1    Portrait  |
+         * |  1     1    Unknown   |
          * -------------------------
          */
-        OInputDevice* keyboard = OInputSystem::instance()->device( "event1" );
-        bool switch0 = true;
+        OInputDevice* keyboard = OInputSystem::instance()->device( m_hinge.event );
+        bool switch0 = false;
         bool switch1 = false;
         if ( keyboard )
         {
@@ -489,11 +500,12 @@
         }
         if ( switch0 )
         {
-            return switch1 ? CASE_LANDSCAPE : CASE_PORTRAIT;
+            return CASE_CLOSED;
+            /*return switch1 ? CASE_CLOSED : CASE_UNKNOWN;*/
         }
         else
         {
-            return switch1 ? CASE_CLOSED : CASE_UNKNOWN;
+            return switch1 ? CASE_PORTRAIT : CASE_LANDSCAPE;
         }
 }
 
@@ -501,15 +513,41 @@
 {
     if ( m_embedix ) return;
 
-    m_hinge.setName( "/dev/input/event2" );
-    if ( !m_hinge.open( IO_ReadOnly ) )
+    if (m_hinge.initialized) return;
+    
+    // should discover the input !!!
+    OInputSystem* sys = OInputSystem::instance();
+    OInputSystem::DeviceIterator it = sys->iterator();
+    while ( it.current() )
+    {
+       QString devicename = "asic3-keys";
+       if ( it.current()->identity() == devicename ) {
+        qDebug("HTC::initHingeSensor : device identity <%s> event <%s>",it.current()->identity().ascii(), it.currentKey().ascii());
+
+        QString absPath = "/dev/input/";
+        absPath += it.currentKey();
+        m_hinge.device.setName ( absPath );
+        m_hinge.event = it.currentKey();
+       }
+        
+        ++it;
+    }
+
+    if ( m_hinge.device.name() == "" ) {
+      qWarning("HTC:init() - No device discovered. Setting default");
+      m_hinge.device.setName( "/dev/input/event2" );
+      m_hinge.event = "event2";
+    }
+
+    if ( !m_hinge.device.open( IO_ReadOnly ) )
     {
-        qWarning( "HTC::init() - Couldn't open /dev/input/event2 for read (%s)", strerror( errno ) );
+        qWarning( "HTC::init() - Couldn't open %s for read (%s)", m_hinge.device.name().ascii(), strerror( errno ) );
         return;
     }
 
-    QSocketNotifier* sn = new QSocketNotifier( m_hinge.handle(), QSocketNotifier::Read, this );
+    QSocketNotifier* sn = new QSocketNotifier( m_hinge.device.handle(), QSocketNotifier::Read, this );
     QObject::connect( sn, SIGNAL(activated(int)), this, SLOT(hingeSensorTriggered()) );
+    m_hinge.initialized = 1;
 
     qDebug( "HTC::init() - Hinge Sensor Initialization successfully completed" );
 }
@@ -518,7 +556,7 @@
 {
     qDebug( "HTC::hingeSensorTriggered() - got event" );
     struct input_event e;
-    if ( ::read( m_hinge.handle(), &e, sizeof e ) > 0 )
+    if ( ::read( m_hinge.device.handle(), &e, sizeof e ) > 0 )
     {
         qDebug( "HTC::hingeSensorTriggered() - event has type %d, code %d, value %d", e.type, e.code, e.value );
         if ( e.type != EV_SW ) return;
diff -ur libopie2.org/opiecore/device/odevice_htc.h libopie2/opiecore/device/odevice_htc.h
--- libopie2.org/opiecore/device/odevice_htc.h	2007-05-02 12:15:39.000000000 +0200
+++ libopie2/opiecore/device/odevice_htc.h	2007-05-02 12:16:01.000000000 +0200
@@ -91,6 +91,12 @@
 #define FB_BLANK_UNBLANK            0
 #define FB_BLANK_POWERDOWN          4
 
+struct hinge_sensor {
+  int initialized;
+  QFile device;
+  QString event;
+};
+
 namespace Opie {
 namespace Core {
 namespace Internal {
@@ -136,7 +142,7 @@
     QString m_backlightdev;
     OLedState m_leds[1];
     bool m_embedix;
-    QFile m_hinge;
+    struct hinge_sensor m_hinge;
 };
 
 struct htc_button {

--------------050106080908070402050402
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

_______________________________________________
Open Source User Interface and Apps built on Qt Embedded
Opie mailing list
[email protected]
https://handhelds.org/mailman/listinfo/opie

--------------050106080908070402050402--