problem with 128M ?

Guylhem Aznar <[email protected]> Mon, 2 Aug 2004 01:56:47 +0200

Newsgroups	gmane.comp.handhelds.simpad.linux
Organization	EXTERNe.NET
Message-ID	<[email protected]>

Hello

This may be related to the 128 M upgrade but now I can no longer launch opie.

While 128M seems detected (cf boot messages), maybe they are not addressable and
that's why opie fails (?). Another possible explaination is I had a lot of
corrupted files - I did a backup of the mtd partition, saved everything
posible, reinstalled every missing file [ie which was listed
in/usr/lib/ipkg/info/*list but no longer present or corrupted.], and burnt this
new image. Maybe I forgot something.

Anyway I think something is wrong. I will now try the new bootloader- I'd be
great if we could create good documentation for the installation of the new
bootloader and a img file to distribute on opensimpad.org

Is the following sufficient to create an image for the new bootloader?
(I will put the kernel zImage + system.map in boot/)

mkfs.jffs2 --root ./root/ --output root-jffs2.noflash --little-endian
--pad=31981568 --eraseblock=0x20000 --faketime
--devtable=device_table-minimal.txt


Bien a vous - Best regards,
Guylhem P. Aznar	

-- 
*@externe.net                                            http://externe.net
Perime/Deprecated:    @oeil.qc.ca, @metalab.unc.edu, @ibiblio.org, @7un.org
GPG: 92EB37C1 DD11C9C9 20519D01 E8FA1B11 42975AF7 http://externe.net/pubkey

simpad-bootmsg.txt (text/plain, 19.6 KB)

/mnt/sbin # reboot
INIT: Sending prtcsetpgrp failed, errno=25

/mnt/sbin # Stopping advanced power management daemon: no /usr/sbin/apmd found;
none killed.
apmd.
Stopping DropBear Secure Shell server: dropbear
Stopping internet superserver: inetd.
Shutting down PCMCIA services: cardmgr[302]: executing: './ide check hda'
cardmgr[302]: + cat: /var/lib/misc/pcmcia-scheme: No such file or directory
cardmgr[302]: check cmd exited with status 1
cardmgr[302]: exiting
done.
Stopping syslogd/klogd: no /sbin/syslogd found; none killed.
no /sbin/klogd found; none killed.
done
killall: qpe: no process killed
Sending all processes the TERM signal...
Sending all processes the KILL signal...
Saving random seed...
urandom stop: failed.
Unmounting remote filesystems...
Deactivating swap...
Unmounting local filesystems...
mount: can't find /mnt/ram in /etc/fstab or /etc/mtab
Rebooting... Restarting system.
à
 PBL V2.4 20.07.2001
Booting...
================================================
Siemens Switzerland Bootloader V2.5.3 10.06.2003
Running @206Mhz Processor ID 0x6901b118
Press ESC for monitor
Occupied Memory: [0x00004000-0x00008000],[0x00008014-0x0007500c]
Flash Id 0x00000018 at virt adr 0x05000000 Size 0x01000000
No 32Bit Flash detected 0x00000000
FlashImage Checksum 0x05040014-0x05059f11=0x8912ac03 Bootloader Image OK
Fabdata Flash @0x05059f18 Ram @0x00021f18 FABDATA: S842-KJULC
MQ200 - Revision ID=2 ...
Initialise PCMCIA Interface... done.
Codec UCB1200 ID:0x1005 Ver.5 Dev.0 Suppl.1 IO 0x00000000
PCMCIA Card Attached... Man-ID: 0x0
NO PCMCIA CARD!  -- Use serial IO
Sysinit done
No serial download request
Boothdr at 0x05080000 -> 0x31415926
Loading executable with header 0xe1a00000
[*********************|] 13039kB/sec
Done

Uncompressing Linux................................................... done, boo
ting the kernel.
Linux version 2.4.19-rmk7-jpm2 ([email protected]) (gcc version 2.95.2 19991
024 (release)) #12 Wed Jul 28 14:30:36 CEST 2004
CPU: StrongARM-1110 revision 8
Machine: Simpad
Ignoring unrecognised tag 0x00000000
On node 0 totalpages: 32768
zone(0): 32768 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA
0,38400 root=1f02 noinitrd jffs2_orphaned_inodes=delete rootfstype=jffs2 mem=128
M
Console: colour dummy device 80x30
Calibrating delay loop... 137.21 BogoMIPS
Memory: 128MB = 128MB total
Memory: 127896KB available (1335K code, 301K data, 76K init)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
CPU clock: 206.400 MHz (59.000-287.000 MHz)
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.13)
SIMpad Registering HAL abstraction layer
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch ([email protected])
devfs: devfs_debug: 0x0
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
ttySA%d0 at MEM 0x80050000 (irq = 17) is a SA1100
ttySA%d1 at MEM 0x80010000 (irq = 15) is a SA1100
mq200fb: setmqmode - before reset
FP_PIN_CONTROL set to 20
Console: switching to colour frame buffer device 100x37
pty: 256 Unix98 ptys configured
SA1100 Real Time Clock driver v1.00
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
UCB1x00: probed IRQ43 correctly. Please remove machine dependencies from ucb1x00
-core.c
Console switches initialized
SA1100 flash: probing 16-bit flash bus
Search for id:(89 18) interleave(1) type(2)
Search for id:(89 18) interleave(1) type(2)
Search for id:(89 18) interleave(1) type(2)
JEDEC: Found no SA1100 flash device at location zero
SA1100 flash: Found 1 x16 devices at 0x1000000 in 16-bit mode
Using buffer write method
No RedBoot partition table detected in SA1100 flash
Using Command Line partition definition
Creating 3 MTD partitions on "SA1100 flash":
0x00000000-0x00080000 : "boot"
0x00080000-0x00180000 : "kernel"
0x00180000-0x02000000 : "root"
Linux Kernel Card Services 3.1.22
  options:  [pm]
SA-1100 PCMCIA (CS release 3.1.22)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
RAMDISK: Couldn't find valid RAM disk image starting at 0.
Eep. Child "mime.types" (ino #2508) of dir ino #514 doesn't exist!
Eep. Child "buttonsettings" (ino #671) of dir ino #516 doesn't exist!
Eep. Child "cardmon" (ino #673) of dir ino #516 doesn't exist!
Eep. Child "obex" (ino #911) of dir ino #517 doesn't exist!
Eep. Child "cardmon" (ino #1078) of dir ino #519 doesn't exist!
Eep. Child "CVS" (ino #725) of dir ino #669 doesn't exist!
Eep. Child "CVS" (ino #736) of dir ino #670 doesn't exist!
Eep. Child "CVS" (ino #861) of dir ino #686 doesn't exist!
Eep. Child "opie-button-settings.list" (ino #1453) of dir ino #1281 doesn't exis
t!
Eep. Child "opie-aqpkg.list" (ino #1448) of dir ino #1281 doesn't exist!
Eep. Child "libjpeg62.list" (ino #1408) of dir ino #1281 doesn't exist!
Eep. Child "opie-appearance.list" (ino #1446) of dir ino #1281 doesn't exist!
Eep. Child "opie-clockapplet.list" (ino #1458) of dir ino #1281 doesn't exist!
Eep. Child "libqpe1.list" (ino #1423) of dir ino #1281 doesn't exist!
Eep. Child "libopie1.list" (ino #1414) of dir ino #1281 doesn't exist!
Eep. Child "opie-batteryapplet.list" (ino #1450) of dir ino #1281 doesn't exist!

Eep. Child "opie-cardmon.list" (ino #1455) of dir ino #1281 doesn't exist!
Eep. Child "libopieobex0.list" (ino #1417) of dir ino #1281 doesn't exist!
VFS: Mounted root (jffs2 filesystem) readonly.
Mounted devfs on /dev
Freeing init memory: 76K
INIT: version 2.85 booting
Setting up device links for devfs: Setting up some devices
done
Activating swap
Calculating module dependencies ...
Loading modules: sa1100usb_core SA1100 USB Controller Core Initialized
usb-eth usbctl: Opened for usb-eth
usbctl: zombie suspended --> [reset] --> default. Device in default state.
usbctl: Resetting
usbctl: Started for usb-eth

Checking all filesystems...
/etc/rcS.d/S30checkfs.sh: fsck: Permission denied

fsck failed.  Please repair manually.

CONTROL-D will exit from this shell and continue system startup.

/ # cd sbin
/sbin # ls -l fsck
-rw-r--r--    1 root     root       118072 Jan  1 00:10 fsck
/sbin # ls -l fsck.ext2
lrwxrwxrwx    1 root     root            4 Jan  1 00:01 fsck.ext2 -> fsck
/sbin # chmod +x fsck
/sbin # rm fsck fsck.ext2
/sbin # cp /
/sbin # /etc/init.d/pcmcia stqrt
Usage: /etc/init.d/pcmcia {start|stop|status|restart|reload|force-reload}
/sbin # /etc/init.d/pcmcia start
Starting PCMCIA services: touch: /var/lib/misc/pcmcia-scheme: No such file or di
rectory
/etc/init.d/pcmcia: cannot create /var/lib/misc/pcmcia-scheme: No such file or d
irectory
cardmgr[228]: watching 2 sockets
done.
/sbin # cardmgr[229]: starting, version is 3.2.3
cardmgr[229]: socket 1: ATA/IDE Fixed Disk
cardmgr[229]: executing: 'modprobe ide-cs'
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Trying to free nonexistent resource <ca812000-ca81200f>
hda: Flash Card, ATA DISK drive
ide0 at 0xca812000-0xca812007,0xca81200e on irq 1
ide_cs: hda: Vcc = 3.3, Vpp = 0.0
cardmgr[229]: executing: './ide start hda'
cardmgr[229]: + cat: /var/lib/misc/pcmcia-scheme: No such file or directory
cardmgr[229]: + mknod /dev/hda b 3 0
cardmgr[229]: + mknod /dev/hda1 b 3 1
cardmgr[229]: + mknod /dev/hda2 b 3 2
cardmgr[229]: + mknod /dev/hda3 b 3 3
cardmgr[229]: + mknod /dev/hda4 b 3 4
cardmgr[229]: + mknod /dev/hda5 b 3 5
cardmgr[229]: + mknod /dev/hda6 b 3 6
cardmgr[229]: + mknod /dev/hda7 b 3 7
cardmgr[229]: + mknod /dev/hda8 b 3 8
cardmgr[229]: + mknod /dev/hda9 b 3 9
cardmgr[229]: + mknod /dev/hda10 b 3 10
cardmgr[229]: + mknod /dev/hda11 b 3 11
cardmgr[229]: + mknod /dev/hda12 b 3 12
cardmgr[229]: + mknod /dev/hda13 b 3 13
cardmgr[229]: + mknod /dev/hda14 b 3 14
cardmgr[229]: + mknod /dev/hda15 b 3 15
cardmgr[229]: + mknod /dev/hda16 b 3 16
hda: bad special flag: 0x03
cardmgr[229]: + /sbin/fsck -Ta /dev/hda1
cardmgr[229]: + eval: /sbin/fsck: No such file or directory
cardmgr[229]: + mount /dev/hda1
hda: 511056 sectors (262 MB) w/0KiB Cache, CHS=507/16/63
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1
 /dev/ide/host0/bus0/target0/lun0: p1
 /dev/ide/host0/bus0/target0/lun0: p1
 /dev/ide/host0/bus0/target0/lun0: p1
cardmgr[229]: + mount: you must specify the filesystem type
cardmgr[229]: start cmd exited with status 1

/sbin # cp /mnt/
/mnt/card/  /mnt/cf/    /mnt/net/   /mnt/ram/
/sbin # cp /mnt/c
/sbin # cd /mnt/
/mnt # ls
card  cf    net   ram
/mnt # cd ..
/ # mount /dev/hda1 /mnt -t vfat
 /dev/ide/host0/bus0/target0/lun0: p1
 /dev/ide/host0/bus0/target0/lun0: p1
/ # cd /mnt
/mnt # ls
bin             data.tar.gz     e2.ipk          lib             usr
control.tar.gz  debian-binary   fsck            sbin
/mnt # cd sbin
/mnt/sbin # ls
badblocks  dumpe2fs   e2image    mke2fs     tune2fs
debugfs    e2fsck     fsck       resize2fs
/mnt/sbin # cp  fsck  /sbin/
/mnt/sbin # cp e2fsck  /sbin/fsck.ext2
/mnt/sbin # fsck debugf
/mnt/sbin # fsck /dev/root
fsck 1.33 (21-Apr-2003)
fsck.ext2: error while loading shared libraries: libext2fs.so.2: cannot open sha
red object file: No such file or directory
/mnt/sbin # ls
badblocks  dumpe2fs   e2image    mke2fs     tune2fs
debugfs    e2fsck     fsck       resize2fs
/mnt/sbin # cd ..
/mnt # ls
bin             data.tar.gz     e2.ipk          lib             usr
control.tar.gz  debian-binary   fsck            sbin
/mnt # cd lib/
/mnt/lib # ls
evms               libcom_err.so.2.0  libext2fs.so.2.4   libuuid.so.1.2
libblkid.so.1      libe2p.so.2.3      libss.so.2.0
/mnt/lib # cp lib
BusyBox v0.61.pre (2003.07.07-12:41+0000) multi-call binary

Usage: cp [OPTION]... SOURCE DEST

/mnt/lib # cp lib* /lib/
/mnt/lib # fsck /dev/root
fsck 1.33 (21-Apr-2003)
fsck.ext2: error while loading shared libraries: libext2fs.so.2: cannot open sha
red object file: No such file or directory
/mnt/lib # cd /lib
/lib # mv libext2fs.so.2.4 libext2fs.so.2
/lib # fsck
fsck 1.33 (21-Apr-2003)
/lib # fsck /dev/root
fsck 1.33 (21-Apr-2003)
fsck.ext2: error while loading shared libraries: libcom_err.so.2: cannot open sh
ared object file: No such file or directory
/lib # mv libcom_err.so.2.0  libcom_err.so.2
/lib # fsck /dev/root
fsck 1.33 (21-Apr-2003)
e2fsck 1.33 (21-Apr-2003)
/dev/root is mounted.

WARNING!!!  Running e2fsck on a mounted filesystem may cause
SEVERE filesystem damage.

Do you really want to continue (y/n)? yes

Couldn't find ext2 superblock, trying backup blocks...
fsck.ext2: Bad magic number in super-block while trying to open /dev/root

The superblock could not be read or does not describe a correct ext2
filesystem.  If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
    e2fsck -b 8193 <device>

/lib # reboot
INIT: Sending prtcsetpgrp failed, errno=25

/lib # Stopping advanced power management daemon: no /usr/sbin/apmd found; none
killed.
apmd.
Stopping DropBear Secure Shell server: dropbear
Stopping internet superserver: inetd.
Shutting down PCMCIA services: cardmgr[229]: executing: './ide check hda'
cardmgr[229]: + cat: /var/lib/misc/pcmcia-scheme: No such file or directory
cardmgr[229]: executing: './ide stop hda'
cardmgr[229]: + cat: /var/lib/misc/pcmcia-scheme: No such file or directory
cardmgr[229]: + umount -v /dev/hda1
cardmgr[229]: + /dev/hda1 umounted
cardmgr[229]: executing: 'modprobe -r ide-cs'
cardmgr[229]: exiting
done.
Stopping syslogd/klogd: no /sbin/syslogd found; none killed.
no /sbin/klogd found; none killed.
done
killall: qpe: no process killed
Sending all processes the TERM signal...
Sending all processes the KILL signal...
Saving random seed...
urandom stop: failed.
Unmounting remote filesystems...
Deactivating swap...
Unmounting local filesystems...
mount: can't find /mnt/ram in /etc/fstab or /etc/mtab
Rebooting... Restarting system.
à
 PBL V2.4 20.07.2001
Booting...
================================================
Siemens Switzerland Bootloader V2.5.3 10.06.2003
Running @206Mhz Processor ID 0x6901b118
Press ESC for monitor
Occupied Memory: [0x00004000-0x00008000],[0x00008014-0x0007500c]
Flash Id 0x00000018 at virt adr 0x05000000 Size 0x01000000
No 32Bit Flash detected 0x00000000
FlashImage Checksum 0x05040014-0x05059f11=0x8912ac03 Bootloader Image OK
Fabdata Flash @0x05059f18 Ram @0x00021f18 FABDATA: S842-KJULC
MQ200 - Revision ID=2 ...
Initialise PCMCIA Interface... done.
Codec UCB1200 ID:0x1005 Ver.5 Dev.0 Suppl.1 IO 0x00000000
PCMCIA Card Attached... Man-ID: 0x0
NO PCMCIA CARD!  -- Use serial IO
Sysinit done
No serial download request
Boothdr at 0x05080000 -> 0x31415926
Loading executable with header 0xe1a00000
[*********************|] 13039kB/sec
Done

Uncompressing Linux................................................... done, boo
ting the kernel.
Linux version 2.4.19-rmk7-jpm2 ([email protected]) (gcc version 2.95.2 19991
024 (release)) #12 Wed Jul 28 14:30:36 CEST 2004
CPU: StrongARM-1110 revision 8
Machine: Simpad
Ignoring unrecognised tag 0x00000000
On node 0 totalpages: 32768
zone(0): 32768 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA
0,38400 root=1f02 noinitrd jffs2_orphaned_inodes=delete rootfstype=jffs2 mem=128
M
Console: colour dummy device 80x30
Calibrating delay loop... 137.21 BogoMIPS
Memory: 128MB = 128MB total
Memory: 127896KB available (1335K code, 301K data, 76K init)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
CPU clock: 206.400 MHz (59.000-287.000 MHz)
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.13)
SIMpad Registering HAL abstraction layer
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch ([email protected])
devfs: devfs_debug: 0x0
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
ttySA%d0 at MEM 0x80050000 (irq = 17) is a SA1100
ttySA%d1 at MEM 0x80010000 (irq = 15) is a SA1100
mq200fb: setmqmode - before reset
FP_PIN_CONTROL set to 20
Console: switching to colour frame buffer device 100x37
pty: 256 Unix98 ptys configured
SA1100 Real Time Clock driver v1.00
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
UCB1x00: probed IRQ43 correctly. Please remove machine dependencies from ucb1x00
-core.c
Console switches initialized
SA1100 flash: probing 16-bit flash bus
Search for id:(89 18) interleave(1) type(2)
Search for id:(89 18) interleave(1) type(2)
Search for id:(89 18) interleave(1) type(2)
JEDEC: Found no SA1100 flash device at location zero
SA1100 flash: Found 1 x16 devices at 0x1000000 in 16-bit mode
Using buffer write method
No RedBoot partition table detected in SA1100 flash
Using Command Line partition definition
Creating 3 MTD partitions on "SA1100 flash":
0x00000000-0x00080000 : "boot"
0x00080000-0x00180000 : "kernel"
0x00180000-0x02000000 : "root"
Linux Kernel Card Services 3.1.22
  options:  [pm]
SA-1100 PCMCIA (CS release 3.1.22)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
RAMDISK: Couldn't find valid RAM disk image starting at 0.
Eep. Child "mime.types" (ino #2508) of dir ino #514 doesn't exist!
Eep. Child "buttonsettings" (ino #671) of dir ino #516 doesn't exist!
Eep. Child "cardmon" (ino #673) of dir ino #516 doesn't exist!
Eep. Child "obex" (ino #911) of dir ino #517 doesn't exist!
Eep. Child "cardmon" (ino #1078) of dir ino #519 doesn't exist!
Eep. Child "CVS" (ino #725) of dir ino #669 doesn't exist!
Eep. Child "CVS" (ino #736) of dir ino #670 doesn't exist!
Eep. Child "CVS" (ino #861) of dir ino #686 doesn't exist!
Eep. Child "opie-button-settings.list" (ino #1453) of dir ino #1281 doesn't exis
t!
Eep. Child "opie-aqpkg.list" (ino #1448) of dir ino #1281 doesn't exist!
Eep. Child "libjpeg62.list" (ino #1408) of dir ino #1281 doesn't exist!
Eep. Child "opie-appearance.list" (ino #1446) of dir ino #1281 doesn't exist!
Eep. Child "opie-clockapplet.list" (ino #1458) of dir ino #1281 doesn't exist!
Eep. Child "libqpe1.list" (ino #1423) of dir ino #1281 doesn't exist!
Eep. Child "libopie1.list" (ino #1414) of dir ino #1281 doesn't exist!
Eep. Child "opie-batteryapplet.list" (ino #1450) of dir ino #1281 doesn't exist!

Eep. Child "opie-cardmon.list" (ino #1455) of dir ino #1281 doesn't exist!
Eep. Child "libopieobex0.list" (ino #1417) of dir ino #1281 doesn't exist!
VFS: Mounted root (jffs2 filesystem) readonly.
Mounted devfs on /dev
Freeing init memory: 76K
INIT: version 2.85 booting
Setting up device links for devfs: Setting up some devices
done
Activating swap
Calculating module dependencies ...
Loading modules: sa1100usb_core SA1100 USB Controller Core Initialized
usb-eth usbctl: Opened for usb-eth
usbctl: zombie suspended --> [reset] --> default. Device in default state.
usbctl: Resetting
usbctl: Started for usb-eth

Checking all filesystems...
fsck 1.33 (21-Apr-2003)
cat: /etc/ramdisk.conf: No such file or directory
Wiping ramdisk: /dev/mtd/3
Creating filesystem on ramdisk: mkfs.ext2: No such file or directory
Mounting local filesystems...
Populating /var filesystem: done
Cleaning: /etc/network/ifstate.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces: Error for wireless request "Set ESSID" (8B1A) :
    SET failed on device eth0 ; No such device.
run-parts: /etc/network/if-pre-up.d/wireless-tools exited with return code 251:
Success
SIOCSIFADDR: No such device
SIOCSIFNETMASK: No such device
SIOCGIFFLAGS: No such device
modprobe: modprobe: Can't locate module wlan0
SIOCSIFADDR: No such device
modprobe: modprobe: Can't locate module wlan0
SIOCSIFNETMASK: No such device
modprobe: modprobe: Can't locate module wlan0
SIOCGIFFLAGS: No such device
done.
Initializing random number generator...
INIT: Entering runlevel: 2
Starting syslogd/klogd: done
Starting advanced power management daemon: apmd.
Starting DropBear Secure Shell server: dropbear
Starting PCMCIA services: cardmgr[442]: watching 2 sockets
done.
Starting internet superserver: inetd.
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Trying to free nonexistent resource <ca812000-ca81200f>
hda: Flash Card, ATA DISK drive
ide0 at 0xca812000-0xca812007,0xca81200e on irq 1

opensimpad login:

signature.asc (application/pgp-signature, 189 B)

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)

iD8DBQFBDYM/6PobEUKXWvcRAiLaAJwIeSAIew7LWJ/Tmalv83JV6wvRvwCgo6Z8
vbrD/hxQ/iIZ3u9Ca0abzhY=
=ITJx
-----END PGP SIGNATURE-----