Re: FW: Bootldr is available for Simpad

On Thu, 9 Sep 2004 19:01:01 +0100, Jose Bernardo Silva wrote

> 
> I do have a jtag passive cable I had to build as I bricked my simpad 
> soon after getting it of ebay. The whole bootloader is in that 
> image? Will it be able to boot a openembedded generated simpad 
> image? If so, I can try it... :)

Ok, downloaded bootldr-simpad01 from sourceforge, and tryed to send simpadboot
into my simpad. Here is the output:


Booting...                                                                     
================================================                               
Siemens Switzerland Bootloader V2.5.3 10.06.2003                               
Running @206Mhz Processor ID 0x6901b118                                       
Press ESC for monitor                                                         
Occupied Memory: [0x00004000-0x00008000],[0x00008014-0x0007500c]               
Flash Id 0x00000018 at virt adr 0x05000000 Size 0x01000000                     
No 32Bit Flash detected 0x00000000
FlashImage Checksum 0x05040014-0x05059f11=0x8912ac03 Bootloader Image OK
Fabdata Flash @0x05059f18 Ram @0x00021f18 FABDATA:
MQ200 - Revision ID=2 ...
Initialise PCMCIA Interface... done.
Codec UCB1200 ID:0x1005 Ver.5 Dev.0 Suppl.1 IO 0x00000001
Entering monitor
PCMCIA Card Attached... Man-ID: 0x0
NO PCMCIA CARD!  -- Use serial IO
Sysinit done
.No serial download request
Calling Monitor

=====================
Monitor:
=====================
Boot from Flash   'f'
Boot from Net     'n'
Power Off         'o'
Erase PSM+Registry'p'
Exit              'q'
Erase Registry    'r'
Erase Flash       'y'
Soft  Reset       's'
Print Fab-String  'w'
-> y

Erase Flash Bank0 from 0x05080000 to 0x07000000
[*********************\]
=====================
Monitor:
=====================
Boot from Flash   'f'
Boot from Net     'n'
Power Off         'o'
Erase PSM+Registry'p'
Exit              'q'
Erase Registry    'r'
Erase Flash       'y'
Soft  Reset       's'
Print Fab-String  'w'
-> n
Probing for any NE2K Card.....
CNet CN40BC Ethernet D NE2000
16 Bit ADAPTER FOUND Memsize 32 KByte. NE2K base 0x300, addr 0:80:ad:a0:22:d1

Searching for server...
My IP 192.168.2.19, Server IP 192.168.2.108, GW IP 0.0.0.0
Booting : initrd.bin

Base    : 0xc7000000 Size 192640 entry:0xc7000000
[*********************-]   192128
Load finished with 436kB/sec
Starting Ima°. at c7000000 PPCR 0x0000000a
Tà0Ja.,.¥£u.  °(¬.
                  °,(¬.
                       .,(..      °¬0...0..                                    .
                            °.,.¬.         .ì0...0..     °.0...0..         °.0..
                                                    ±,)¬.         °.0...0..    .
                                                                               .
                                                                               .
                                                                               .
                                                                               .
                                                                              ë.
                                                                               .
                                                                               .
                                                                               .

---
Jose Bernardo B R Silva             | Source Mage GNU/Linux Section Guru
[email protected]            | http://www.sourcemage.org
http://counter.li.org #245602
http://cosmos.oninetspeed.pt/jose.bernardo
[email protected]



-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM. 
Deadline: Sept. 13. Go here: http://sf.net/ppc_contest.php