Re: FW: Bootldr is available for Simpad

Hi,

> Alex has made an image for bootldr.
> http://handhelds.org/~chicken/simpadtestimage.jffs2

Is this supposed to work? At least on my CL4 with flash upgrade to 32M,
the boot stops with:

SA1100 flash: probing 16-bit flash bus
Search for id:(89 18) interleave(1) type(2)
Search for id:(89 18) interleave(1) type(2)
Search for id:(89 18) interleave(1) type(2)
JEDEC: Found no SA1100 flash device at location zero
SA1100 flash: Found 1 x16 devices at 0x1000000 in 16-bit mode
Using buffer write method
No RedBoot partition table detected in SA1100 flash
Using static partition definition
Creating 2 MTD partitions on "SA1100 flash":
0x00000000-0x00040000 : "SIMpad bootldr"
0x00040000-0x02000000 : "SIMpad root jffs2"

And here it hangs. It looks like it finds the second flash but not the
first one. However, the new bootldr was able to flash the 20M image just
fine.

Thanks,
Jochen


-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl