Re: How to back to oryginall bootloades

i did the switch back to WinCE, but the way i did it...well it was more 
like brute force than finesy. All i did was to take original bootloader, 
which you can find here 
http://sourceforge.net/project/showfiles.php?group_id=65409&package_id=77867 
(i have all the bootloaders needed on CD, so mail me and i will send 
them to you). To tell the truth i couldn't serload some of the 
bootloaders   but in the end i managed it out (please don't ask me how i 
just don't remember ;-) ) After  bootloader loaded i've erased the flash 
(from bootloader) and next i've copied wince image with serload. I had 
problems with serloading winCE image with some of the boot loaders, but 
after trying few bootloaders i've finally serloaded the image.
OK i know that it's a way of stupidity, but i'm kinda n00b with linux & 
embeded devices.

Stan

>Hi all
>I installed opie 0.9.1rc1, first, I serload blupdater.img, second I send 
>system image with serial port, all works very fine. Now, I`d like come back 
>to WinCE and I do:
>
>boot> set override = 1
>	setting param <override> to value <1>
>boot> pflash 0 40000 0
>	addr=00000000
>	len=00009C40
>	protect=00000000
>	Protect=00000000
>boot> load bootldr
>	partition bootldr is a bootldr partition:
>	requiring a bootldr or parrot image.
>	After receiving file, will automatically uncompress .gz images
>	loading flash region bootldr
>	using ymodem
>	ready for YMODEM transfer...
>	362F95577901AFF5C29BA77867A9D33B simpadSL.rom
>	00022EC0 bytes loaded to C0000400
>	wrong magic: E3A01E27
>	parrot word 0 ->0xE1A00000
>	Expected ->0xEA0003FE
>	parrot word 0x1000 ->0x55AA5A5A
>	Expected ->0xE321F0D3
>	You must load wince BEFORE loading Parrot
>	Not loading invalid bootldr into flash
>
>I used simpadSL.rom and simpadCL.rom from sourceforge.net
>
>And now I dont know what I must do for come back to win_ce, I try serload - 
>nothing, I change serial to 38200_8n1 - nothing, I try connect pin1 and 2 - 
>nothing.
>Please help, how can I come back to old bootloader (I dont have CF)
>Sorry about my very bad english
>Kris
>
>
>
>--__--__--
>
>_______________________________________________
>Simpad-general mailing list
>[email protected]
>https://lists.sourceforge.net/lists/listinfo/simpad-general
>
>
>End of Simpad-general Digest
>
>
>  
>



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.7.0 - Release Date: 05-01-17



-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt