Re: How to back to oryginall bootloades

I have this answer from Alex:
don't use "load bootldr" to reflash the wince one, use "load flash 0" after=
=20
you have unprotected the flash. This will solve your issue.

I try this and all works very fine
Thanks Alex
Kris


Dnia wtorek, 18 stycznia 2005 21:51, Krzysztof Grandys napisa=B3:
> Hi all
> I installed opie 0.9.1rc1, first, I serload blupdater.img, second I send
> system image with serial port, all works very fine. Now, I`d like come ba=
ck
> to WinCE and I do:
>
> boot> set override =3D 1
> 	setting param <override> to value <1>
> boot> pflash 0 40000 0
> 	addr=3D00000000
> 	len=3D00009C40
> 	protect=3D00000000
> 	Protect=3D00000000
> boot> load bootldr
> 	partition bootldr is a bootldr partition:
> 	requiring a bootldr or parrot image.
> 	After receiving file, will automatically uncompress .gz images
> 	loading flash region bootldr
> 	using ymodem
> 	ready for YMODEM transfer...
> 	362F95577901AFF5C29BA77867A9D33B simpadSL.rom
> 	00022EC0 bytes loaded to C0000400
> 	wrong magic: E3A01E27
> 	parrot word 0 ->0xE1A00000
> 	Expected ->0xEA0003FE
> 	parrot word 0x1000 ->0x55AA5A5A
> 	Expected ->0xE321F0D3
> 	You must load wince BEFORE loading Parrot
> 	Not loading invalid bootldr into flash
>
> I used simpadSL.rom and simpadCL.rom from sourceforge.net
>
> And now I dont know what I must do for come back to win_ce, I try serload=
 -
> nothing, I change serial to 38200_8n1 - nothing, I try connect pin1 and 2=
 -
> nothing.
> Please help, how can I come back to old bootloader (I dont have CF)
> Sorry about my very bad english
> Kris
>
>
> -------------------------------------------------------
> The SF.Net email is sponsored by: Beat the post-holiday blues
> Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
> It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
> _______________________________________________
> Simpad-general mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/simpad-general


-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl