RE: Bootldr patches

Great Alex!
You are right, the second chip needs also the reset.

In WinCE we did some tricks to work around limits of the
old bootloader. I will have to look at these to see if it
is possible to run WinCE with bootldr. Don't hold your breath!

Regards
Walter

> -----Original Message-----
> From: Alex Lange [mailto:[email protected]]
> Sent: Wednesday, January 28, 2004 8:12 PM
> To: [email protected]
> Subject: Re: [Simpad-general] Bootldr patches
> 
> 
> Hi Walter,
> 
> this seems to work great! I have used the original 1x16 
> FlashSectors in 
> btflash.c to reset the second chip using the IPCOM value. If it's not 
> resetted then bootldr times out when reaching the second chip.
> I can finish off the rest on my own I think.
> Last question: Is there any chance to boot windoze ce using 
> this bootldr?
> 
> thanks for this help!
> Alex
> 
> On Tuesday 27 January 2004 22:41, Walter Schweizer wrote:
> > Hello bootldr's
> >
> > Here are my changes for SL4.
> > They are barely tested.
> > JTAG cable mandatory!
> >
> > With mkrambl you can create a bootldr sutable for download 
> with serload.
> >
> > Regards
> > Walter
> 
> 
> 
> -------------------------------------------------------
> The SF.Net email is sponsored by EclipseCon 2004
> Premiere Conference on Open Tools Development and Integration
> See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
> http://www.eclipsecon.org/osdn
> _______________________________________________
> Simpad-general mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/simpad-general
> 


-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn