Re: IBIZ SUCCESS !

Hi Guylhem,

that sounds good. Could you send me your ipk. I could place it in the 
feed at opensimpad.org.

It would be nice if you could write up a howto for the IBIZ keyboard at 
http://opensimpad.org/wiki/

Nice work.

Chris

Guylhem Aznar wrote:

>Hello,
>
>On Fri, 06 Feb 2004 13:18:11 +0100
>Juergen Messerer <[email protected]> wrote:
>  
>
>>For your keyboard. I would suggest the following one. I know it is 
>>exspensive but it works greate:
>>    
>>
>
>Well well I *no longer need this* :-)
>
>After some extensive tests of the keyboard, the serial port, etc. I realised the
>problem was in input-attach [which should be removed from the distribution BTW
>since it makes the kernel crash].
>
>My solution : get qpe-flexis. replace /dev/ttyS0 in one file by /dev/ttySA0.
>recompile. install the ipk, restart opie, select "flexis" and test - IT WORKS!
>
>I'm done with that thing. Ok it looks easy [stupid port name convention] but
>I've been trying various software combinations, serial port setup (speed, etc)
>for a very long time until I realised the ibiz, the serial cable and serial port
>as well but the mistake was in the software. Now it works just fine [if you
>don't press the green button which hangs my simpad]
>
>Crossposted to opie lists where someone asked me the solution 2 weeks ago [while
>still looking for it]
>
>Best regards,
>Guylhem
>
>
>  
>


-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click