Re: Re: hh.org bootldr almost working!

Hi,
Has there been any progress in making the new padded images available?
Any progress on a bootloader for the CL4?
Ciao,
Christof
----- Original Message ----- 
From: "Schweizer Walter" <[email protected]>
To: "Alex Lange" <[email protected]>;
<[email protected]>
Sent: Wednesday, January 21, 2004 3:16 PM
Subject: RE: [Simpad-general] Re: hh.org bootldr almost working!


Hi Alex

The bootldr is not able to boot WinCE on SIMpad.
Bootldr uses a different memory map than the original bootloader.

With the new jffs2 images it is not necessary to have a new
bootloader. The original should do, because the new images initialize
the whole jffs2 section. I don't kmow if the new images are available
on opensimpad already.

Walter

> -----Original Message-----
> From: Alex Lange [mailto:[email protected]]
> Sent: Tuesday, January 20, 2004 3:56 PM
> To: [email protected]
> Subject: Re: [Simpad-general] Re: hh.org bootldr almost working!
>
>
> Hi,
>
> I've made some good progress with the now bootloader based on
> the one from
> handhelds.org. Everything is working now, even PCMCIA. I just
> can't get the
> flash going for the SL4. the Sinuspad and the CL4 will
> already work with my
> current bootloader (not sure if it's possible to boot wince).
> On the SL4 only
> 16 MB of flash memory can be used.
>
> cya
> Alex
>
> On Monday 19 January 2004 22:54, Christof Baumgärtner wrote:
> > Hi,
> > has there been any progress with a bootloader for the Sinuspad
> > recently?
> >
> > Ciao,
> > Christof
> >
> > ----- Original Message -----
> > From: <[email protected]>
> > To: <[email protected]>; <[email protected]>
> > Sent: Sunday, November 09, 2003 10:13 PM
> > Subject: RE: [Simpad-general] Re: hh.org bootldr almost working!
> >
> >
> > Hi Alex
> >
> > great job. I know the problem but I have to look up in the
> schematics
> > which
> > GPIO do you have to set
> > to keep the power.
> >
> > It is like a relay. I think you have to set GPIO 10 or 11 to output
> > high.
> > I will confirm this tomorrow.
> >
> > I will be busy until 13. of november. After that I will
> have time again
> > to care about such things.
> > Can you send me a tarball of your bootloader?
> > Then I can care about the display part.
> >
> > How big is the bootloader? The current is around 107k
> >
> > Thanks a lot for your effort
> >
> > C ya
> >
> > -J.
> >
> > >-- Original Message --
> >
> > From: [email protected] (Alex Lange)
> >
> > >To: [email protected]
> > >Subject: [Simpad-general] Re: hh.org bootldr almost working!
> > >Date: Sat, 8 Nov 2003 22:52:01 +0100
> > >
> > >
> > >Hi Chris,
> > >
> > >This is the old bootloader from handhelds.org. I'm not too
familiar
> >
> > with
> >
> > >lab
> > >yet so I will try the old one first.
> > >I've managed it to detect the flash memory correctly now.
> > >The only thing remaining is power management as the unit
> still turns
> >
> > off
> >
> > >if I
> > >don't keep pressing the power button. Also, when leaving the
Simpad
> >
> > unpowered
> >
> > >for some minutes, bootldr doesn't come up at all anymore. I need
to
> >
> > reflash
> >
> > >pbl and afterwards flash the hh.org bootldr again in order
> to get it
> >
> > alive
> >
> > >again.
> > >The rest of the bootloader is fully useable though.
> > >
> > >cya
> > >Alex
> > >
> > >
> > >
> > >-------------------------------------------------------
> > >This SF.Net email sponsored by: ApacheCon 2003,
> > >16-19 November in Las Vegas. Learn firsthand the latest
> > >developments in Apache, PHP, Perl, XML, Java, MySQL,
> > >WebDAV, and more! http://www.apachecon.com/
> > >_______________________________________________
> > >Simpad-general mailing list
> > >[email protected]
> > >https://lists.sourceforge.net/lists/listinfo/simpad-general
> >
> > sunrise ADSL
> > Modem, Aufschaltgebühren und Monatsgebühr bis Ende Jahr gratis:
> > http://internet.sunrise.ch/de/internet/int_ads.asp
> >
> >
> >
> >
> >
> > -------------------------------------------------------
> > This SF.Net email sponsored by: ApacheCon 2003,
> > 16-19 November in Las Vegas. Learn firsthand the latest
> > developments in Apache, PHP, Perl, XML, Java, MySQL,
> > WebDAV, and more! http://www.apachecon.com/
> > _______________________________________________
> > Simpad-general mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/simpad-general
> >
> >
> >
> >
> > -------------------------------------------------------
> > The SF.Net email is sponsored by EclipseCon 2004
> > Premiere Conference on Open Tools Development and Integration
> > See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
> > http://www.eclipsecon.org/osdn
> > _______________________________________________
> > Simpad-general mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/simpad-general
>
>
>
> -------------------------------------------------------
> The SF.Net email is sponsored by EclipseCon 2004
> Premiere Conference on Open Tools Development and Integration
> See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
> http://www.eclipsecon.org/osdn
> _______________________________________________
> Simpad-general mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/simpad-general
>


-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Simpad-general mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/simpad-general



-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id56&alloc_id438&op=click