Re: Wandering Digitizer

--- In [email protected], "sardhianto" <sardhianto@y...> 
wrote:
>
> Hi All,
> 
> A little bit of tip on wandering digitizer:
> 1. Try to remove the screen protector and see if it helps
> 2. If no 1 fails, try to disconnect the battery
> 
> I'm afraid disconnecting battery is not for the "weak hearted" :( 
but 
> I believe info on how to disassemble your T is on the net 
somewhere.
> 
> I use T2 and my wife use T1, BOTH had experienced digitizer drift, 
and 
> my above suggestion seems to work. You may have to do it 
REPEATEDLY as 
> my tips only fix the symptom, not the root cause.
> 
> Upgrading to T3, on my opinion, is not a viable option as its 
battery 
> is not sufficient for its large screen. A T5 or TX would be much 
> better.
> 
> Good luck, and please post if my tips works for you.
> 
> Sonnie@Jakarta
> 
> 
>One thing I have found to check to see if it is an alignment 

problem or a digitizer problem is to try realigning the digitizer 
then if that doesn't work listen for a "humm" from the digitizer.  
If it is humming it will continue to give you problems unitl it is 
replaced.