RE: Problem in compitling using RH9

Hi Brandon,

    I have solved the compiling problems by using the RH9 default
compilers(v3.2), but not downgrade the compilers to v2.95 or v2.96,
and I found that to work with Qtopia 1.7, we have to do a lot of
things to make it work with Zaurus, the cross compile library has to
recompile to Arm and we have to upgrade the Qt/Embedded version in the
Zaurus. I decided to choose Qtopia 1.5 finally, because I am new comer
for Qt, Qtopia, so I am not confidence enough to do that.. Thanks for
your help.

Best Regards,
Roy

> Hi Roy,
>
> The error messages didn't make it into the email.  Could you post those?
>
> On my system I have to change all references of gcc to g++ in the
> resulting Makefile or I'll have link errors, but I'm not using v1.7 so
> that may or may not fix your problem.
>
> QSettings is in Qt 3.x and Qtopia is based off 2.x.  Likewise, qmake is
> a Qt 3.x animal.  I don't know enough about it to know whether or not it
> works with 2.x source code.
>
> I hope this helps you out.  Have a good day!
>
> Brandon
>
> -----Original Message-----
> From: Roy [mailto:[email protected]]
> Sent: Sunday, October 19, 2003 2:49 AM
> To: [email protected]
> Subject: Re: [Zaurus-devel] Problem in compitling using RH9
>
>
> Dear,
>      I followed the instructions from the link here:
>
> http://docs.zaurus.com/index.php?id=linux_compiler_setup_howto
>
> I first installed all the followings:
> 1)gcc-cross-sa1100-2.96.2-0.i386.rpm
> 2)binutils-cross-arm-2.11.2-0.i386.rpm
> 3)glibc-arm-2.2.2-0.i386.rpm
> 4)linux-headers-arm-sa1100-2.4.6-3.i386.rpm
>
> Also, since the compiler version has to be matched, i installed them
> from the CD1 of RH9 install CD, here they are:
> 1)compat-gcc-c++-7.3-2.96.118
> 2)compat-libstdc++-devel-7.3-2.96.118
> 3)compat-libstdc-7.3-2.96.118
> 4)compat-gcc-7.3-2.96.118
>
> then i installed the SDK:
> qtopia-free-1.7.0-lrh9.i386.rpm
>
> and copied the tmake.conf from the link into
> /opt/Qtopia/tmake/lib/qws/linux-x86-g++/tmake.conf
>
> To setup the environment variables, i used the scripts downloaded
> from the link:
> dev-x86-qpe.sh
>
> and type 'source dev-x86-qpe.sh'
>
> After that, i copied the /opt/Qtopia/examples/application/ to
> /tmp(or other location i have tried), and run the 'tmake -o Makefile
> example.pro' or 'qmake -o Makefile example.pro' under that directry.
> Finally, type 'make', error occurred, i have attached the error msgs
> using tmake or qmake in this email, hope they can help to solve my
> problems.
>
> And other questions are,
> 1) which Makefile generator is better for developing Zaurus apps under
> RH9?
>    tmake or qmake? (but they have different errors ..)
> 2) I read the Qt class and there is QSetting class provided for us,
>    but when i read the Qtopia library, no QSetting class provided, can
> we still use the QSetting or use the Config class instead??
>
> THANKS FOR HELPING ME A LOT.
>
> Roy
>
>
>
>> Roy
>>
>>>     I am using RH9 to develop my application on Zaurus, but when i
>>> tried
>>> to compile the example project, many errors resulted. I knew some
>>> people also having these problems when using RH9 and i have followed
>>> some of the instructions from some of the websites, such as:
>>>
>>> install the following packets:
>>> compat-gcc-c++-7.3-2.96.110
>>> compat-libstdc++-7.3-2.96.110
>>> compat-libstdc++-devel-7.3-2.96.110
>>> compat-gcc-7.3-2.96.110
>>>
>>> I found them in my RH9 CD1 and installed all. and also, i downloaded
>>> the Qtopia SDK 1.7.0 version which is the latest one, the RH9 default
>>> tmake version is 1.11 which is also the latest one. But either i use
>>> tmake or qmake , compile errors also exist(many unreference errors),
>>> how to solve this problem ? many thanks! and it is urgent for me.
>>> thanks again.
>>
>> I suggest you give more details of exactly what you did at the time
>> errors occurred, and exactly what error messages there were. Also list
>> any online FAQs or instructions you are following...
>>
>> -Cam
>> (reply to the list please)
>
>
>
> _______________________________________________
> Zaurus-devel mailing list
> [email protected]
> http://lists.zaurus.com/mailman/listinfo/zaurus-devel
>
>
> _______________________________________________
> Zaurus-devel mailing list
> [email protected]
> http://lists.zaurus.com/mailman/listinfo/zaurus-devel