RE: Zaurus-general Digest, Vol 7, Issue 14

> Date: Wed, 15 Oct 2003 07:23:47 +0300
> From: "Mark  Mifsud" <[email protected]>
> Subject: RE: [Zaurus-general] connection of zaurus to lcd projector.
> To: <[email protected]>
> Message-ID: <[email protected]>
> Content-Type: text/plain;	charset="us-ascii"
>
>
>
> Hi,
>
> Is there a method to view power point presentations from the z 5600 on
an
> lcd projector. I normally do this with a laptop - can it be done with
the > Z?
> 

Yes there is, but you will have to buy a CF peripheral for RGB/XGA
output from the Zaurus.  If you need to be on the web at the same time
as giving the presentation, this is probably impossible as the CF slot
will be used up by your video out card and can't hold a WiFi card as
well.

>
> any software or cables i might need?
>

An example of one is here (http://www.myzaurus.com/acc_Comm8.asp), but
you could shop around for something that does the same thing.

As far as software goes, for the 5600 (the same model that I have), you
should have Hancom's Presenter should have been included as part of the
additional software on your installation CD.  Just copy the .ipkg file
over to the Zaurus and then use the Add/Remove software applet to
install it.  Once done, it should show up on your applications tab.

That should do it.

Good luck and let us know how it goes.

Jim

>
> Regards,
> Mark Mifsud
> 
> Mark Mifsud
> Environmental Science Department
> Junior College
> University of Malta

*All opinions are my own and not those of anyone else or any other
institution.  No one else would want them anyway*