Re: atm32u4df and avrdude

You can also use an arduino as a programmer with avrdude.



Sent from my Verizon, Samsung Galaxy smartphone


-------- Original message --------
From: Dave Harper <[email protected]>
Date: 9/18/19 5:06 PM (GMT-05:00)
To: [email protected]
Subject: Re: [avr-gcc-list] atm32u4df and avrdude

I've used the Raspberry Pi with avrdude to program AVR parts before.
You can find a howto article at Adafruit.com -
https://learn.adafruit.com/program-an-avr-or-arduino-using-raspberry-pi-gpio-pins/configuration.

Dave


On 09/18/2019 01:26 PM, Bruce Byfield wrote:
> I'm trying to write an article for Linux Pro Magazine on Macropad
> (http://macropad.co/), and I was hoping to find some help, since my
> experience is limited.
>
> The device comes  with instructions for Windows and macOS, but not for
> Linux. Unfortunately, it uses an atm32u4dfu, and I'm having trouble
> finding a programmer that avrdude can use to communicate with it. Can
> anyone tell me if a suitable programmer exists, and, if so, what it is?
>
> I'm not subscribed to the list, so please cc me on any reply.
>
> Thanks,
>
>
> ooooo
> Bruce Byfield (on Pacific time) 604-421-7189
> "Designing with LibreOffice": www.designingwithlibreoffice.com<http://www.designingwithlibreoffice.com>
> Prentice Pieces: https://prenticepieces.com/
>
> _______________________________________________
> AVR-GCC-list mailing list
> [email protected]
> https://lists.nongnu.org/mailman/listinfo/avr-gcc-list


_______________________________________________
AVR-GCC-list mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/avr-gcc-list

_______________________________________________
AVR-GCC-list mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/avr-gcc-list