RE: can4linux for the BananaPi
"John Dammeyer" <[email protected]>
| Newsgroups | gmane.comp.hardware.bus.can |
|---|---|
| Message-ID | <[email protected]> |
Looking at the source forge site the can4linux isn't available for the BeagleBone Black yet? Cheers John Dammeyer > -----Original Message----- > From: [email protected] [mailto:canlist- > [email protected]] On Behalf Of Heinz-Jürgen Oertel > Sent: August-18-14 1:29 PM > To: CANLIST > Subject: [CANLIST] can4linux for the BananaPi > > Hi > > we have a new platform to play with. It's the BananaPi. Aimed to be as close > as possible to a RasperryPi it has a CAN controller on chip. The Allwinner A20 > comes wit one CAN controller. Add an external CAN transceiver, like the > SN65HVD233, install can4linux and you are ready to go with CAN. > > The source of the driver is available at > https://sourceforge.net/projects/can4linux/ > After installing the kernel source tree, do a > > make TARGET=BANANAPI > sudo install can4linux.ko > > and use the examples provided in can4linux-examples - and have fun. > > I'm very interested in your test results. All should work but error handling is > currently not tested much. > > -- > mit freundlichen Grüßen > Heinz-Jürgen Oertel -- Archives and useful links: http://groups.yahoo.com/group/CANbus Subscribe and unsubscribe at www.vector.com/canlist/ Report any problems to <[email protected]>