Re: J1939 turn signals

Hello John

Here's from the standard for the PGN 65089

"Flashing is accomplished by sending the lighting message with the state 
alternately ON or OFF"

Simon

Simon Byholm - Software Manager / Quality Manager

Phone: +358 6 357 6306
Fax: +358 6 357 6320
email: [email protected]
web: www.tke.fi

TK Engineering solves your CAN, CANopen, J1939 and NMEA2000 problems by providing the hardware, software and know-how you need to design, manufacture and troubleshoot your industrial and heavy machine CAN networks. Call +358 6 357 6300 or email [email protected] to learn how we can help you solve your CAN related problems.

On 22.3.2016 5:32, Dr KH Tang wrote:
> Hello John, you may refer to PGN 65089.
>
> On Tue, Mar 22, 2016 at 7:44 AM, John Dammeyer <[email protected] 
> <mailto:[email protected]>> wrote:
>
>     I have a question about the operation of turn signals (and hazard)
>     on a J1939 vehicle.Is there a simple TURN SIGNAL ON message and
>     then the lights take care of the flashing or does the central
>     system issue LEFT SIDE TURN LIGHTS ON/OFF periodically in order to
>     flash the lights?
>
>     Thanks
>
>     John Dammeyer
>
>     "ELS! Nothing else works as well for your Lathe"
>
>     Automation Artisans Inc.
>
>     http://www.autoartisans.com/ELS/
>
>     Ph. 1 250 544 4950 <tel:1%20250%20544%204950>
>
>
>
>
> -- 
> Dr K H Tang
> Controller Area Network Solutions (M) Sdn Bhd
> 30, Jalan Puteri 5/12, Bandar Puteri, 47100 Puchong, Selangor, Malaysia.
> http://www.cans.com.my
> Mobile: +60 (0)12-306 2054
> Tel: +60 (0)3-8061 6678 / 9678     Fax: +60 (0)3-8061 3789