Re: bridge mode

"Ferdi Bülbül" <[email protected]>
Newsgroups gmane.comp.hardware.cisco.turkish
Message-ID <[email protected]>
Merhaba,

ATM tarafında ;
*
interface ATM0/0.1 point-to-point
ip address 192.168.20.38 255.255.255.252
bandwidth 512
  pvc 0/35
  vbr-nrt 512 512
**  atm route-bridged ip
  encapsulation aal5snap

interface FastEthernet0/0
ip address 10.xx.xxx.1 255.255.255.0
speed auto!!

ip route 0.0.0.0 0.0.0.0 192.168.20.37*

diger tarafta bir değişiklik yapmana gerk yok:

*interface Serial1/1:3
no ip address
encapsulation frame-relay IETF
frame-relay lmi-type ansi!

interface Serial1/1:3.1 point-to-point
description ** **512gshdsl
bandwidth 512
delay 10
frame-relay interface-dlci 43
bridge-group 1

interface BVI1
ip address 192.168.20.37 255.255.255.252

bridge 1 protocol ieee
bridge 1 route ip*

denermisin :)

İyi çalışmalar,
Ferdi BÜLBÜL





On Wed, Sep 24, 2008 at 11:22 AM, aydo[an ovat <[email protected]> wrote:

>
> Aşağıdaki şekilde  bridge mode da hat çalışmıyor . sebebi ne olabilir . TT
>  bridge  mode çalışması gerek diyor. Bu hat mpls backbone nundan geçiyormuş
> TT de..
>
> Şube;
>
> interface ATM0/0.1 point-to-point bandwidth 512 bridge-group 1 pvc 0/35
>  vbr-nrt 512 512  encapsulation aal5snap !!        interface FastEthernet0/0
> ip address 10.xx.xxx.1 255.255.255.0 speed auto!!interface BVI1 ip address
> 192.168.20.38 255.255.255.252!ip classlessip route 0.0.0.0 0.0.0.0192.168.20.37no ip http server!bridge 1 protocol ieeebridge 1 route ip
>
>
>
>
> merkez ( kanallı e1  in içinde 512 fr de 512 gshdsl sonlanıyor. )
>
> interface Serial1/1:3 no ip address encapsulation frame-relay IETF
> frame-relay lmi-type ansi!interface Serial1/1:3.1 point-to-point description
> ** **512gshdsl bandwidth 512 delay 10 frame-relay interface-dlci 43
>  bridge-group 1
>
>
>
> interface BVI1 ip address 192.168.20.37 255.255.255.252
>
> bridge 1 protocol ieeebridge 1 route ip
>
>
> _________________________________________________________________
> News, entertainment and everything you care about at Live.com. Get it now!
> http://www.live.com/getstarted.aspx
>
> [Non-text portions of this message have been removed]
>
>
> ------------------------------------
>
> --
> Cisco Teknik Tartisma Listesi (Cisco-ttl)
>
> Bu listede onerilen degisikliklerin uygulanmasindaki tum sorumluluk
> kullaniciya aittir. Liste yoneticileri, oneride bulunan liste uyeleri ya da
> bu uyelerin calistigi kuruluslar herhangi bir sekilde sorumlu
> tutulamazlar.Yahoo! Groups Links
>
>
>
>


-- 
Ferdi BÜLBÜL


[Non-text portions of this message have been removed]


------------------------------------

--
Cisco Teknik Tartisma Listesi (Cisco-ttl)

Bu listede onerilen degisikliklerin uygulanmasindaki tum sorumluluk 
kullaniciya aittir. Liste yoneticileri, oneride bulunan liste uyeleri ya da 
bu uyelerin calistigi kuruluslar herhangi bir sekilde sorumlu tutulamazlar.Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/cisco-ttl/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/cisco-ttl/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:[email protected] 
    mailto:[email protected]

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.