RE: sh isdn status

Selamlar..
BRI kartlar voice interface olarak tanimlandigi icin encapsulation set edemiyorum..
isdn swtich-type parametresini basic-5ess yaptigimda ise hic arama yapilamiyor..Mevcut durumda arama yapilabiliyor ancak karsi taraf telefonu actiginda cagri kesiliyor...

Ayrica benim merak ettigim konu sh isdn status ciktisinda neden iki adet tei satiri goruyorum? Bu satirlardan bir tanesi ok iken digeri problemli gorunuyor...

Herkese mutlu ve saglikli yillar...

mugur

--- On Thu, 1/1/09, Salim ªiºman <[email protected]> wrote:
From: Salim ªiºman <[email protected]>
Subject: RE: [cisco-ttl] sh isdn status
To: "CISCO TTL TTL" <[email protected]>
Date: Thursday, January 1, 2009, 7:29 PM

 
Mehmet bey encapsulation ve isdn switch-type parametreleri ile oynamayý
denediniz mi ?
encapsulation'ý ppp  isdn switch-type'ýda basic-5ess yapýp test
edebilir misiniz.
 
interface BRI0/1/0 no ip address encapsulation ppp isdn switch-type basic-5ess
isdn point-to-point-setup no cdp enable
 
 
Salim Sisman
Network Specialist



To: [email protected]: [email protected]: Tue, 30 Dec 2008
03:58:00 -0800Subject: [cisco-ttl] sh isdn status



Selamlar...BRI uzerinden PBX baglantili bir lokasyonda VoIP calistirmak
istiyoruz..PBX ve router fiziksel baglantisi OK. Ancak sh isdn status
ciktisindan asagidaki gibi birden fazla TEI satiri goruyorum...Bunun sebebi
hakkinda bilgisi olan varsa paylasabilir mi?(BRI port configlerini de asagiya
ekledim..)Tesekkurler, iyi calismalar...Router#sh isdn status Global ISDN
Switchtype = basic-net3ISDN BRI2/0 interface        dsl 1, interface ISDN
Switchtype = basic-net3    Layer 1 Status:        ACTIVE    Layer 2 Status:     
  TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED        TEI = 0,
Ces = 1, SAPI = 0, State = TEI_ASSIGNED    Layer 3 Status:        0 Active Layer
3 Call(s)    Active dsl 1 CCBs = 0    The Free Channel Mask:  0x80000003ISDN
BRI2/1 interface        dsl 2, interface ISDN Switchtype = basic-net3    Layer 1
Status:        ACTIVE    Layer 2 Status:        TEI = 0, Ces = 1, SAPI = 0,
State = MULTIPLE_FRAME_ESTABLISHED        TEI = 0, Ces = 1, SAPI = 0, State =
TEI_ASSIGNED    Layer 3 Status:        0 Active Layer 3 Call(s)    Active dsl 2
CCBs = 0    The Free Channel Mask:  0x80000003    Total Allocated ISDN CCBs =
0!interface BRI2/0 no ip address isdn switch-type basic-net3 isdn
overlap-receiving isdn incoming-voice voice isdn static-tei 0!interface BRI2/1
no ip address isdn switch-type basic-net3 isdn overlap-receiving isdn
incoming-voice voice isdn static-tei 0end[Non-text portions of this message have
been removed] 





_________________________________________________________________
Show them the way! Add maps and directions to your party invites. 
http://www.microsoft.com/windows/windowslive/events.aspx

[Non-text portions of this message have been removed]


------------------------------------

--
Cisco Teknik Tartisma Listesi (Cisco-ttl)

Bu listede onerilen degisikliklerin uygulanmasindaki tum sorumluluk 
kullaniciya aittir. Liste yoneticileri, oneride bulunan liste uyeleri ya da 
bu uyelerin calistigi kuruluslar herhangi bir sekilde sorumlu
tutulamazlar.Yahoo! Groups Links






      

[Non-text portions of this message have been removed]


------------------------------------

--
Cisco Teknik Tartisma Listesi (Cisco-ttl)

Bu listede onerilen degisikliklerin uygulanmasindaki tum sorumluluk 
kullaniciya aittir. Liste yoneticileri, oneride bulunan liste uyeleri ya da 
bu uyelerin calistigi kuruluslar herhangi bir sekilde sorumlu tutulamazlar.Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/cisco-ttl/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/cisco-ttl/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:[email protected] 
    mailto:[email protected]

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/