transparent bridging ve QoS

Merhaba ,

Bir c3845 bridging modunda calistirmak ve ayni zamanda WAN portunda service-policy kullanarak QoS yapmak istiyorum. Config asagidaki gibi olacak ama calisacagindan emin degilim. daha once benzer bir uygulama yapmis arakadaslar varsa fikir verebilirlerse sevinirim..


!
bridge crb
bridge 1 protocol ieee
!
int g 0/0
description LAN
bridge-group 1 spanning-disabled
!
int g 0/1
description WAN
service-policy output TEST_POLICY
bridge-group 1
bridge-group 1 spanning-disabled
!
policy-map TEST_POLICY
 class SITE1
shape average 1000000
service-policy data1
 class STE2
shape average 1000000
service-policy data1
 class SITE3
shape average 1000000
service-policy data1
!
class-map match-all SITE1
 match access-group name SITE1
!
class-map match-all SITE2
 match access-group name SITE1
!
class-map match-all SITE1
 match access-group name SITE2
!
class-map match-all SITE3
 match access-group name SITE3
!
policy-map data1
 class Citrix-data
  bandwidth percent 60
 class Telnet
  bandwidth percent 5
 class Printing
  bandwidth percent 5
 class class-default
  bandwidth percent 30
!


Tayfun



This communication, including any attachments, is confidential. If you are not the intended recipient, you should not read it - please contact me immediately, destroy it, and do not copy or use any part of this communication or disclose anything about it. Thank you. Please note that this communication does not designate an information system for the purposes of the Electronic Transactions Act 2002.


[Non-text portions of this message have been removed]



------------------------------------

--
Cisco Teknik Tartisma Listesi (Cisco-ttl)

Disclaimer: Some of the individuals posting to this site, including 
the moderators, work for Cisco Systems, Inc. Opinions expressed here and in any corresponding comments are the personal opinions of the original authors, not those of Cisco.
 Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/cisco-ttl/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/cisco-ttl/join
    (Yahoo! ID required)

<*> To change settings via email:
    [email protected] 
    [email protected]

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/