3550'de Band genişliği IP bazl ı ve port bazlı kısıtlama
"ALI T" <[email protected]> Fri, 08 Jan 2010 23:24:11 -0000
| Newsgroups | gmane.comp.hardware.cisco.turkish |
|---|---|
| Message-ID | <[email protected]> |
Merhabalar,
Cisco 3550 Switch'de IP bazlý ve port bazlý band geniþliði
kýsýtlamasý yapmak istiyorum.
Aþaðýdaki þekilde 256 Kbps hýzý ile 192.168.1.111 IP'sini
kýsýtlamak istiyorum.Aþaðýdaki þekilde config
yaptým.Ancak access-list kontrol ettiðimde match etmediðini
görüyorum.
Ayrýca port bazlý nasýl kýsýtlayabilirim ? Örnek
confige ihtiyacým var.
Nerede eksikliðim var ? Fikirlerinizi rica ederim.
mls qos aggregate-policer MUSTERI_A_256 256000 8000 exceed-action drop
mls qos
class-map match-all IP_CLASS
description IP class
match access-group 1
!
!
policy-map POLICY
description PC KISITLA
class IP_CLASS
police aggregate MUSTERI_A_256
!
interface FastEthernet0/1
description 192.168.1.254 bagli (fw ic bacak)
switchport mode access
spanning-tree bpduguard enable
service-policy input POLICY
!
interface FastEthernet0/2
description 192.168.1.111 bagli
switchport mode access
spanning-tree portfast
spanning-tree bpduguard enable
!
interface Vlan1
ip address 192.168.1.222 255.255.255.0
!
ip route 0.0.0.0 0.0.0.0 192.168.1.254
!
access-list 1 permit 192.168.1.111
TEST_3550#sh IP ACCEss-lists
Standard IP access list 1
10 permit 166.1.1.111
TEST_3550#SH POLicy-maP INterface
FastEthernet0/1
Service-policy input: POLICY
Class-map: IP_CLASS (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: access-group 1
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
0 packets, 0 bytes
5 minute rate 0 bps
[Non-text portions of this message have been removed]
------------------------------------
--
Cisco Teknik Tartisma Listesi (Cisco-ttl)
Disclaimer: Some of the individuals posting to this site, including
the moderators, work for Cisco Systems, Inc. Opinions expressed here and in any corresponding comments are the personal opinions of the original authors, not those of Cisco.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/cisco-ttl/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/cisco-ttl/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/