Re: cisco adsl card konfigrasyonu

Merhaba bunu uygulayip donermisiniz ...Selamlarimla ....
-----------------------------------------------------------------------
interface Dialer0
 ip address negotiated
 no ip redirects
 no ip unreachables
 no ip proxy-arp
 ip mtu 1452
 ip virtual-reassembly
 encapsulation ppp
 ip route-cache flow
 dialer pool 1
 dialer-group 1
 no cdp enable
 ppp authentication chap pap callin
 ppp chap hostname mcserdar@ttnet
 ppp chap password 0 1234567
---------------------------------------------------------------------




________________________________
From: "[email protected]" <[email protected]>
To: [email protected]
Sent: Tue, February 2, 2010 5:19:58 PM
Subject: [cisco-ttl] cisco adsl card konfigrasyonu

  

Merhaba ,

Cisco 1800 series router a ADSL card ile birkaç güne kadar baglantı sağlayabiliyorduk , daha sonra card ın sorunlu oldugunu düşünüp, arızaya gönderdik fakat sorun olmadığını söylediler, ADSL card daki ışıklarda CD ışığı sürekli olarak yanıp sönüyor, yani hat oturmuyor hala . bir ADSL modem ile hattın kontrolunu yaptım çıkış sağlayabiliyorum. Kullanıcı adım ve şifrem de dogru.  Aşağıda modem e ait konfig. dosyasını gönderiyorum, herhangi bir terslik gözünüze çarpıyor mu yanlış yaptıgım birşey mi var , modem konfigrasyonu ile ilgili birkaç döküman buldum onlara göre konfigure ettim sorun değişmedi, yardımcı olabilir misinz ? Teşekkürler

router#sh run
Building configuration. ..

Current configuration : 6314 bytes
!
version 12.4
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname router
!
boot-start-marker
boot system flash c1841-advipservices k9-mz.124- 8.bin
boot-end-marker
!
no logging buffered
!
no aaa new-model
!
resource policy
!
ip cef
!
!
no ip domain lookup
ip domain name domain.com
ip sla monitor 1
type echo protocol ipIcmpEcho A.A.A.A
ip sla monitor schedule 1 life forever start-time now
!
track 123 rtr 1 reachability
!
interface FastEthernet0/ 0
ip address A.A.A.A 255.255.255. 224
ip nat inside
ip virtual-reassembly
ip route-cache flow
ip policy route-map pbr
duplex auto
speed auto
!
interface ATM0/0/0
description 256-internet
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0/0/0.1 point-to-point
no snmp trap link-status
pvc 8/35
pppoe-client dial-pool-number 1
!
!
interface Dialer0
ip address negotiated
ip mtu 1492
ip nbar protocol-discovery
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication pap callin
ppp pap sent-username 01234567@ttnet password 0 9876543
!
router rip
version 2
passive-interface Serial0/1/0
passive-interface Dialer0
network A.A.A.0
no auto-summary
!
ip local policy route-map LOCAL_TRACK_ POLICY
ip route 0.0.0.0 0.0.0.0 Dialer0 track 123
!
no ip http server
ip nat inside source list 1 interface Dialer0 overload
!
access-list 1 permit any
dialer-list 1 protocol ip permit
!
control-plane
!

[Non-text portions of this message have been removed]


 

[Non-text portions of this message have been removed]



------------------------------------

--
Cisco Teknik Tartisma Listesi (Cisco-ttl)

Disclaimer: Some of the individuals posting to this site, including 
the moderators, work for Cisco Systems, Inc. Opinions expressed here and in any corresponding comments are the personal opinions of the original authors, not those of Cisco.
 Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/cisco-ttl/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/cisco-ttl/join
    (Yahoo! ID required)

<*> To change settings via email:
    [email protected] 
    [email protected]

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/