IRW strange behavior after making conf with irrecord? Alternating results.
Mark Hutchinson <[email protected]>
| Newsgroups | gmane.comp.hardware.lirc |
|---|---|
| Message-ID | <[email protected]> |
Hello, I have made a conf file for a remote control with irrecord ( see below ) Using that conf file, I get odd behavior testing it with irw. on pressing number one for instance, it will give KEY_1 the first time then KEY_2 the second time, then KEY_1 the third time. It alternates. Same every time I try it. I have tried to make a new irrecord conf file, but got the same results. Any ideas on what I can try? This is me pressing the 1 key, three times: root@mythbuntu:~# irw 0000000000000002 00 KEY_1 /etc/lirc/own_remote.conf 0000000000000002 01 KEY_1 /etc/lirc/own_remote.conf 0000000000000002 02 KEY_1 /etc/lirc/own_remote.conf 0000000000000002 03 KEY_1 /etc/lirc/own_remote.conf 0000000000000002 04 KEY_1 /etc/lirc/own_remote.conf 0000000000000002 05 KEY_1 /etc/lirc/own_remote.conf 0000000000000003 00 KEY_2 /etc/lirc/own_remote.conf 0000000000000003 01 KEY_2 /etc/lirc/own_remote.conf 0000000000000003 02 KEY_2 /etc/lirc/own_remote.conf 0000000000000003 03 KEY_2 /etc/lirc/own_remote.conf 0000000000000003 04 KEY_2 /etc/lirc/own_remote.conf 0000000000000003 05 KEY_2 /etc/lirc/own_remote.conf 0000000000000003 06 KEY_2 /etc/lirc/own_remote.conf 0000000000000002 00 KEY_1 /etc/lirc/own_remote.conf 0000000000000002 01 KEY_1 /etc/lirc/own_remote.conf 0000000000000002 02 KEY_1 /etc/lirc/own_remote.conf 0000000000000002 03 KEY_1 /etc/lirc/own_remote.conf 0000000000000002 04 KEY_1 /etc/lirc/own_remote.conf 0000000000000002 05 KEY_1 /etc/lirc/own_remote.conf 0000000000000002 06 KEY_1 /etc/lirc/own_remote.conf 0000000000000002 07 KEY_1 /etc/lirc/own_remote.conf 0000000000000002 08 KEY_1 /etc/lirc/own_remote.conf 0000000000000002 09 KEY_1 /etc/lirc/own_remote.conf 0000000000000002 0a KEY_1 /etc/lirc/own_remote.conf Here is my conf file: root@mythbuntu:~# cat /etc/lirc/own_remote.conf # Please make this file available to others # by sending it to <[email protected]> # # this config file was automatically generated # using lirc-0.9.0(default) on Sat Mar 18 23:40:06 2017 # # contributed by # # brand: /etc/lirc/own_remote.conf # model no. of remote control: # devices being controlled by this remote: # begin remote name /etc/lirc/own_remote.conf flags RAW_CODES|CONST_LENGTH eps 30 aeps 100 gap 99800 begin raw_codes name KEY_0 550 100 350 100 350 500 250 350 300 150 300 500 250 150 300 150 300 150 300 150 300 500 250 350 300 500 250 200 250 200 250 200 250 200 250 name KEY_1 500 100 350 150 300 500 300 300 300 150 300 500 250 150 300 150 300 150 300 500 300 500 250 350 250 550 250 200 250 200 250 200 250 350 250 name KEY_2 550 100 350 100 300 500 300 350 250 150 300 500 300 150 300 150 300 150 300 150 250 550 250 350 250 550 250 200 250 150 300 150 250 550 250 name KEY_3 550 100 300 150 300 500 300 300 300 150 300 500 250 200 250 150 300 150 300 550 250 500 250 350 300 500 250 200 250 200 250 200 250 700 250 name KEY_4 550 100 350 100 350 500 250 350 250 150 300 500 300 150 300 150 300 150 300 150 250 550 250 350 250 550 250 200 250 200 250 350 250 200 250 name KEY_5 550 100 300 150 300 500 300 350 250 150 300 500 300 150 250 200 250 200 250 550 250 500 250 400 250 500 250 200 250 200 250 350 250 400 250 end raw_codes end remote ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot