Re: mode2 shows output, irrecord fails (using the remote out port of an amplifier)

Robert Jäschke <[email protected]> Sun, 8 Mar 2020 19:28:58 +0100

Newsgroups	gmane.comp.hardware.lirc
Organization	L3S Research Center
Message-ID	<[email protected]>

Am 06.03.20 um 20:04 schrieb Bengt Martensson:
>> Using IrScrutinizer to record buttons now also works, which is great.
> 
> would you mind telling me what hardware driver you are using? I have no
> idea....

First: I am not sure, if it really worked. E.g., for the "MODE" button
IrScrutinizer returned 0x39DDE (see the lircd.conf in my last message)
but ir-keytable returned 0x14760d. (I have tried both values in
lircd.conf and neither of them worked.)

Second: I have set the capture hardware to /dev/lirc0. Then in the
"Scrutinize remote" tab the RC5x buttons were automatically identified
as RC5x (D=20, S=118, F=13, T=1 for the abovementioned button). From
there I have exported the captured buttons as a lircd.conf.


Best,
Robert

signature.asc (application/pgp-signature, 833 B)