Re: Missing something basic no doubt
Bengt Martensson <[email protected]> Tue, 30 Apr 2024 20:51:07 +0200
| Newsgroups | gmane.comp.hardware.lirc |
|---|---|
| Message-ID | <[email protected]> |
This is a multi-part message in MIME format.
--===============5791046523369901906==
Content-Type: multipart/alternative;
boundary="------------rcNTh0CjCGCLmZYDA10iWWT0"
Content-Language: en-US, de-DE
This is a multi-part message in MIME format.
--------------rcNTh0CjCGCLmZYDA10iWWT0
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: quoted-printable
On 4/30/24 17:09, James B Huber wrote:
> Folks,
> =C2=A0 Have been using lirc for like forever, anyway I got new
> Raspberrypi-5, it is replacing a RPI-4B, unplug one, plug in
> the other. The MCEUSB receiver and remote I was using (and it works)
> is the same one I am still using.
>
> Issue, I have ZIPPO output showing up in IRW.
>
> *I see the data coming in via mode2:*
> pi@rpi-5:/usr/lib/systemd/system $ mode2
> Using driver default on device /dev/lirc0
> Trying device: /dev/lirc0
> Using device: /dev/lirc0
> pulse 650
> space 52200
> pulse 650
> space 52250
> pulse 650
> timeout 127000
This is not a sensible IR signal, so it is no wonder that it does not
decode. Smells like a lowlevel/hardware error.
I recommend using a well known signal (e.g. RC5 or NEC) in the
install/debug phase. And make sure cec and devinput is diabled.
PS. What is "ZIPPO output"? https://www.zippo.de/ ??
Greetz,
Bengt
--------------rcNTh0CjCGCLmZYDA10iWWT0
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE html>
<html>
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DUTF-=
8">
</head>
<body>
<div class=3D"moz-cite-prefix">On 4/30/24 17:09, James B Huber wrote:<=
br>
</div>
<blockquote type=3D"cite"
cite=3D"mid:bd2ef01aca0cfb45ad83c0bfbba20f2c61de93c1.camel-7eaDwCIQjUbk1uMJSBkQmQ@public.gmane.org">
<meta http-equiv=3D"content-type" content=3D"text/html; charset=3DUT=
F-8">
<div>Folks,</div>
<div>=C2=A0 Have been using lirc for like forever, anyway I got new
Raspberrypi-5, it is replacing a RPI-4B, unplug one, plug in</div>
<div>the other. The MCEUSB receiver and remote I was using (and it
works) is the same one I am still using.</div>
<div><br>
</div>
<div>Issue, I have ZIPPO output showing up in IRW.</div>
<div><br>
</div>
<div><b>I see the data coming in via mode2:</b></div>
<div style=3D"text-align: justify; margin-left: 3ch;"><a
href=3D"mailto:pi@rpi-5" moz-do-not-send=3D"true"
class=3D"moz-txt-link-freetext">pi@rpi-5</a>:/usr/lib/systemd/sy=
stem
$ mode2</div>
<div style=3D"text-align: justify; margin-left: 3ch;">Using driver
default on device /dev/lirc0</div>
<div style=3D"text-align: justify; margin-left: 3ch;">Trying device:
/dev/lirc0</div>
<div style=3D"text-align: justify; margin-left: 3ch;">Using device:
/dev/lirc0</div>
<div style=3D"text-align: justify; margin-left: 3ch;">pulse 650</div=
>
<div style=3D"text-align: justify; margin-left: 3ch;">space 52200</d=
iv>
<div style=3D"text-align: justify; margin-left: 3ch;">pulse 650</div=
>
<div style=3D"text-align: justify; margin-left: 3ch;">space 52250</d=
iv>
<div style=3D"text-align: justify; margin-left: 3ch;">pulse 650</div=
>
<div style=3D"text-align: justify; margin-left: 3ch;">timeout 127000=
</div>
</blockquote>
<p><br>
</p>
<p>This is not a sensible IR signal, so it is no wonder that it does
not decode. Smells like a lowlevel/hardware error.<br>
</p>
<p><br>
</p>
<p>I recommend using a well known signal (e.g. RC5 or NEC) in the
install/debug phase. And make sure cec and devinput is diabled.<br>
</p>
<p>PS. What is "ZIPPO output"? <a class=3D"moz-txt-link-freetext" href=
=3D"https://www.zippo.de/">https://www.zippo.de/</a> ??<br>
</p>
<p>Greetz,</p>
<p>Bengt</p>
<p><br>
</p>
<br>
</body>
</html>
--------------rcNTh0CjCGCLmZYDA10iWWT0--
--===============5791046523369901906==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
--===============5791046523369901906==--