SVN REV 6452 and 6451

Uwe Bonnes <bon-1JbLm1bU5j5ZIx36JBfelj3+ndqKAYMe9FMPySWZwLkb1SvskN2V4Q@public.gmane.org> Mon, 23 May 2016 14:46:15 +0200
Newsgroups gmane.comp.hardware.microcontrollers.ethernut
Message-ID <[email protected]>
Hallo Ole,

can you please explain why you need both patches? I must confess all these
STM32 names are confusing, and I did a lot of errors. After the last rework,
however I think the names are more consistant. 

To explain:
- HW_MCU_XXX is used only in the configurator
- MCU_STM32_XXX is used for families and subfamilies and exported in
  the include/cfg headers
- STM32 is finally used to include the device specific vendor header via
  stm32xxxx.h

E.g. Rev 6452 splits MCU_STM32F401 in MCU_STM32F401xC and MCU_STM32F401xE to
no obvious purpose. "MCU_STM32F401" is (or at least should be) defined and
expoted for both MCU_STM32F401xC and MCU_STM32F401xE.

But probably you did that change to fix something...

Bye

-- 
Uwe Bonnes                bon-1JbLm1bU5j5ZIx36JBfelj3+ndqKAYMe9FMPySWZwLkb1SvskN2V4Q@public.gmane.org

Institut fuer Kernphysik  Schlossgartenstrasse 9  64289 Darmstadt
--------- Tel. 06151 1623569 ------- Fax. 06151 1623305 ---------
_______________________________________________
http://lists.egnite.de/mailman/listinfo/en-nut-discussion