Re: Basic loading of nut/OS applications via TFTP

Hello,

I just wanted to add a (quick and dirty) screenshot of my Tftpd64-settings (see attachment). As earlier mentioned, I was able to download one of the files from another PC, so it is basically working.

Mit freundlichen Grüßen
Sincères Salutations
Best regards 

pEMTec SNC
Nikolas Becker
Dipl.- Physiker
Entwicklung

6 rue Jules Verne 
BP 60147 
57603 Forbach Cedex 
  
Tel.:    +33 (0) 387.13.09.22
E-Mail: [email protected]
  
www.pemtec.de
www.pemtec.fr
Geschäftsführer/Gérance:
Dipl.-Ing. Hans Wacht
SNC au capital de 10 000 000 euros
RCS Sarreguemines B 450 696 752
Code APE 2841 Z


-----Ursprüngliche Nachricht-----
Von: [email protected] [mailto:[email protected]] Im Auftrag von Nikolas Becker
Gesendet: Montag, 23. Juli 2018 16:52
An: Ethernut User Chat (English) <[email protected]>
Betreff: Re: [En-Nut-Discussion] Basic loading of nut/OS applications via TFTP

Hello Tim,

I'm sorry, while writing my mail, I totally forgot that ip-adress line. I tried it with it, it made no difference. I've added another log at the end of this mail, where I execute the correct commands. As you can see, it made no difference, unfortunately.

Best regards 

	Nikolas

SAMBOOT 1.4 :  Type=3 Loading 0x42000 to 0x27000000  done OK


U-Boot 2011.12 (Mar 28 2012 - 10:09:42)

CPU: AT91SAM9XE
Crystal frequency:   18.432 MHz
CPU clock        :  180.634 MHz
Master clock     :   90.317 MHz
I2C:   ready
DRAM:  128 MiB
WARNING: Caches not enabled
Flash: 512 KiB
NAND:  1024 MiB
MMC:   mci: 0
DataFlash:AT45DB321
Nb pages:   8192
Page Size:    528
Size= 4325376 bytes
Logical address: 0xC0000000
Area 0:	C0021000 to C0041FFF (RO) setup
Area 1:	C0042000 to C00C5FFF (RO) uboot
Area 2:	C00C6000 to C0359FFF (RO) kernel
Area 3:	C035A000 to C03DDFFF (RO) nutos
Area 4:	C03DE000 to C03FEFFF      env
SF: Detected AT45DB321D with page size 528 Bytes, total 16.5 MiB
In:    serial
Out:   serial
Err:   serial
Net:   macb0: PHY present at 0
macb0: Starting autonegotiation...
macb0: Autonegotiation complete
macb0: link up, 100Mbps full-duplex (lpa: 0xcde1)
macb0
Hit any key to stop autoboot:  3  0 
U-Boot> run setfactory
Loading...
## Executing script at 20000000
## Resetting to default environment
Enter MAC address and then execute 'saveenv' to store the new environment.
Please enter 'ethaddr':
U-Boot> setenv ethaddr 00:06:98:50:00:CA
U-Boot> 
U-Boot> setenv tftpserverip 172.16.1.105
U-Boot> 
U-Boot> setenv nut_image_name httpserv.bin
U-Boot> 
U-Boot> saveenv
Saving Environment to SPI Flash...
SF: Detected AT45DB321D with page size 528 Bytes, total 16.5 MiB Erasing SPI flash...Writing to SPI flash...done
U-Boot> 
U-Boot> run tftpbootnut
macb0: PHY present at 0
macb0: link up, 100Mbps full-duplex (lpa: 0xcde1) BOOTP broadcast 1 DHCP client bound to address 172.16.1.87
U-Boot>
_______________________________________________
http://lists.egnite.de/mailman/listinfo/en-nut-discussion
_______________________________________________
http://lists.egnite.de/mailman/listinfo/en-nut-discussion