Re: Working Windows build?

If it is not too much hassle for you, I would gladly appreciate if you woul=
d build notconfigure. Last time I tried it took me hours and I failed. If i=
t is not possible for you, I will give it a shot.

Best regards,
   Nikolas

-----Urspr=FCngliche Nachricht-----
Von: en-nut-discussion-bounces-inJ12LbcDfezQB+pC5nmwQ@public.gmane.org [mailto:en-nut-discussion-bounces@=
egnite.de] Im Auftrag von bon-1JbLm1bU5j5ZIx36JBfelj3+ndqKAYMe9FMPySWZwLkb1SvskN2V4Q@public.gmane.org
Gesendet: Dienstag, 31. M=E4rz 2020 13:51
An: Ethernut User Chat (English) <[email protected]>
Betreff: Re: [En-Nut-Discussion] Working Windows build?

Nikolas Becker writes:
> I tried stm3210e-eval.conf and stm3240g-eval.conf. Always the same:
> the makedes and makerules cannot be found.   =

> Besides, I currently want to build the predefined ethernut50f.conf =

> file, since I use that board.
> =

Hello,

it seems that make could not handle the mix of '\\' and '/' as path delimit=
er. I pushed a change to sourceforge. My linux setup still build, and runni=
ng with wine now make also proceed much further, see
below:

Can you build nutconfigure? Let me know if not.

Bye

> env LANG=3DCC wine /tmp/wine_make/bin/make.exe
Z:/tmp/wine_make/bin/make -C arch
make[1]: Entering directory `Z:/home/bon/devel/ethernut/nucleo_f303re/nutbl=
d/nutbld/arch'
arm-none-eabi-gcc -c -IZ:/home/bon/devel/ethernut/nucleo_f303re/nutbld/./nu=
tbld/include  -I/home/bon/devel/ethernut/nut//include -I/home/bon/devel/eth=
ernut/nut//include/contrib  -DBOARDNAME=3D\"NUCLEO\" -DBOARD=3D"<arch/cm3/b=
oard/nucleo.h>" -DSTM32DIE=3D446 -DVENDOR=3D"<arch/cm3/stm/vendor/stm32f303=
xe.h>" -DPINMUXHEADER=3D"<arch/cm3/stm/generated/stm32f303e_pinmux.h>" -DDM=
ACHANNELHEADER=3D"<arch/cm3/stm/generated/stm32f303e_dma.h>" -DIRQn_MAX=3D8=
5 -MD -MP -mcpu=3Dcortex-m4 -mthumb -D__CORTEX__ -mfloat-abi=3Dhard -mfpu=
=3Dfpv4-sp-d16 -ffunction-sections -fdata-sections -fomit-frame-pointer  -O=
s -Wall -Wstrict-prototypes -Werror -Wa,-a=3Dcm3/cmsis/cortex_init.lst -DIR=
Qn_MAX=3D85  -o cm3/cmsis/cortex_init.o /home/bon/devel/ethernut/nut//arch/=
cm3/cmsis/cortex_init.c
Can't recognize 'arm-none-eabi-gcc -c -IZ:/home/bon/devel/ethernut/nucleo_f=
303re/nutbld/./nutbld/include  -I/home/bon/devel/ethernut/nut//include -I/h=
ome/bon/devel/ethernut/nut//include/contrib  -DBOARDNAME=3D\"NUCLEO\" -DBOA=
RD=3D"<arch/cm3/board/nucleo.h>" -DSTM32DIE=3D446 -DVENDOR=3D"<arch/cm3/stm=
/vendor/stm32f303xe.h>" -DPINMUXHEADER=3D"<arch/cm3/stm/generated/stm32f303=
e_pinmux.h>" -DDMACHANNELHEADER=3D"<arch/cm3/stm/generated/stm32f303e_dma.h=
>" -DIRQn_MAX=3D85 -MD -MP -mcpu=3Dcortex-m4 -mthumb -D__CORTEX__ -mfloat-a=
bi=3Dhard -mfpu=3Dfpv4-sp-d16 -ffunction-sections -fdata-sections -fomit-fr=
ame-pointer  -Os -Wall -Wstrict-prototypes -Werror -Wa,-a=3Dcm3/cmsis/corte=
x_init.lst -DIRQn_MAX=3D85  -o cm3/cmsis/cortex_init.o /home/bon/devel/ethe=
rnut/nut//arch/cm3/cmsis/cortex_init.c' as an internal or external command,=
 or batch script.
make[1]: *** [cm3/cmsis/cortex_init.o] Error 9009
make[1]: Leaving directory `Z:/home/bon/devel/ethernut/nucleo_f303re/nutbld=
/nutbld/arch'
make: *** [all] Error 2

-- =

Uwe Bonnes                bon-1JbLm1bU5j5ZIx36JBfelj3+ndqKAYMe9FMPySWZwLkb1SvskN2V4Q@public.gmane.org

Institut fuer Kernphysik  Schlossgartenstrasse 9  64289 Darmstadt
--------- Tel. 06151 1623569 ------- Fax. 06151 1623305 --------- _________=
______________________________________
http://lists.egnite.de/mailman/listinfo/en-nut-discussion
_______________________________________________
http://lists.egnite.de/mailman/listinfo/en-nut-discussion