Re: [gpsim] How to build gpsim for Debian

Hi Xiaofan,
It is really cool if you can summary how you have done so far step by step 
as all the installations are fresh now in your mind. I'll appreciate it if 
you can do so. It will save a lot of time for others. BTW, have you or 
anyone else installed the geda software successfully under linux? I also 
like to have some advises on that part. Thanks.
regards,
Bing

----- Original Message ----- 
From: "Chen Xiao Fan" <[email protected]>
To: <[email protected]>
Sent: Friday, July 22, 2005 8:17 PM
Subject: RE: [gnupic] [gpsim] How to build gpsim for Debian


> Yes it works on Linux as well. Firstly I built gtk+-extra-2.1.1.tar.gz and
> then I built latest gpsim cvs successfully after I downgraded flex to 
> 2.5.4
> according to your suggestions. Thanks.
>
> On Windows I just downloaded your snapshot. It works right away. Actually
> now
> I have similar setup in Windows as in Linux: SDCC, gputils and gpsim. On
> Linux
> I have MPLAB C18 and C30 working as well under Wine. Therefore all the 
> major
>
> software developemnt tools are working on both platforms. MPLAB IDE itself
> is
> not working under Wine though but it is not a problem.
>
> On the programmer side, I have PICkit 1 working under both Linux and
> Windows.
> ICD2 is not really working under Linux yet even though LPLAB seems
> promissing.
> Wisp628 is also working under both platform.
>
> So the first step of my Linux PIC development experiment (development 
> tools
> setup)
> is almost over. The next step is to learn to use the tools. I plan to use
> the
> PICkit 1 and PIC FS USB as the hardware platforms for the experimentation. 
> I
> need
> to do some research to get PIC FS USB working under Linux.
>
> Thanks again for all the helps.
>
> Regards,
> Xiaofan
>
>
>>I recommend you to take the latest version of gpsim from CVS and
>>gtk+extra-2.1.1.tar.gz from
>>http://prdownloads.sourceforge.net/scigraphica/gtk%2Bextra-2.1.1.tar.gz?dow
> n
>>load. I use this combination to build gpsimWin32 snapshots at
>>http://gpsim.sourceforge.net/snap.php. I hope that this combination works
> on
>>Linux too, but I didn't try it.
>>
>>Borut
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [email protected]
> For additional commands, e-mail: [email protected]
>