RE: fsusb-0.1.11 problem

Despite the error message I think the binary is correctly
dumped to the 18F4550. Maybe it is a false alarm.

By the way, I have ported it to Windows using mingw and
libusb-win32. For those who are interested (maybe not so
many in this list), please download the Win32 port at
the following URL.
http://forum.microchip.com/tm.asp?m=106426.

Regards,
Xiaofan

----------------------------------------------
Xiaofan Chen
R&D Engineer, Photoelectric Sensor Development
Pepperl+Fuchs Singapore
http://www.pepperl-fuchs.com
Signals for the world of automation
--------------------------------------------

-----Original Message-----
From: Chen Xiao Fan 
Sent: Thursday, July 28, 2005 10:31 PM
To: '[email protected]'
Subject: fsusb-0.1.11 problem


I am now trying to get PIC FS USB demo board working under Linux and
I have been playing with the Linux usb bootloader fsusb-0.1.11 from 
http://internetking.org/fsusb/.

I even want to port it to Windows using libusb-win32 (still not
successful yet).

However I just find out out that it is actually not working on my
Ubuntu box. What could be the problem? usb_pickit is working for
PICkit 1.

Regards,
Xiaofan


mcuee@ubuntu:~/Desktop/build/fsusb-0.1.11$ sudo ./fsusb MCHPUSB.hex
Locating USB Microchip(tm) PICDEM-FS USB(tm) (vendor 0x04d8/product 0x000b)
Found USB PICDEM-FS USB as device '005' on USB bus 002
Communication established.  Onboard firmware version is 1.0
Writing program memory successful
mismatch in 32-byte chunk at 0x00000000:
File:  beef0cf01200####################################################
Device:e3ef03f01200ffff04ef04f01200ffffffffffffffffffff0cef04f01200ffff
Program memory contains errors!