RE: custom hardware and DS2502-E48
"Chris Fox" <[email protected]>
| Newsgroups | gmane.comp.hardware.microcontrollers.tini |
|---|---|
| Message-ID | <003201c3dc75$06b93030$04c0a8c0@CHRIS> |
The DS2502-E48 is a factory-programmed part that has an IEEE-supplied Ethernet MAC in it. If you program a DS2502 yourself, you'll have to get an approved MAC from the IEEE. What you should do is buy the DS2502-E48 part from Dallas, which has the data in it already. That way you don't have to buy MAC addresses yourself. Chris -----Original Message----- From: tini-admin-6tN4nzCoH/[email protected] [mailto:[email protected]] On Behalf Of Philip Shaw Sent: Friday, January 16, 2004 11:48 AM To: tini-6tN4nzCoH/[email protected] Subject: [TINI]custom hardware and DS2502-E48 Dear TINI team, We have a custom PCB. Before fitting the DS2502 device, do we have to pre prog it? if so with what data? If not, does TINI prog it (with 12V pulses) automatically or do we need to do something? if so what? philip _______________________________________________ TINI mailing list TINI-6tN4nzCoH/[email protected] To UNSUBSCRIBE, edit your profile, or see list archives: http://lists.dalsemi.com/mailman/listinfo/tini _______________________________________________ TINI mailing list TINI-6tN4nzCoH/[email protected] To UNSUBSCRIBE, edit your profile, or see list archives: http://lists.dalsemi.com/mailman/listinfo/tini