Problem with TINI ftp server - failed under put and dir commands

I'm trying to run the first Blinky application program and I am at lost
trying to get TINI400 to load in the program. I've tried removing all
firewalls and even had direct ethernet connection to the PC with the
samresults. Am I missing something?

Anthony Spiecker 
Assistant Professor 
Rochester Institute of Technology 
  

.              <DIR>        01-17-04 12:38a . 
..             <DIR>        01-17-04 12:38a .. 
BLINKY~1 CLA           618  11-21-03  4:21p Blinky.class 
BLINKY~1 TIN           532  11-21-03  4:21p Blinky.tini 
         2 file(s)          1,150 bytes 
         2 dir(s)       11,959.77 MB free 
C:\TINI\tini12\examples\Blinky\bin>ftp 
ftp> open 192.168.1.215 
Connected to 192.168.1.215. 
220 Welcome to slush.  (Version 1.12)  Ready for user login. 
User (192.168.1.215:(none)): root 
331 Password Required for root 
Password: 
230 User root logged in. 
ftp> bin 
200 Type set to Binary 
ftp> put Blinky.tini 
200 Command successful. 
550 Unknown internal failure: java.io.IOException: Unable to connect to
remote h 
ost 
ftp> 
  
----------------------------------------- 
Connected to 192.168.1.215. 
220 Welcome to slush.  (Version 1.12)  Ready for user login. 
User (192.168.1.215:(none)): root 
331 Password Required for root 
Password: 
230 User root logged in. 
ftp> dir 
200 Command successful. 
150 Opening ASCII mode data connection for file list. 

(FTP hunged up after this command)
_______________________________________________
TINI mailing list
TINI-6tN4nzCoH/[email protected]
To UNSUBSCRIBE, edit your profile, or see list archives:
http://lists.dalsemi.com/mailman/listinfo/tini