help DSTINIM400 - no network !
Alain De Meyer <[email protected]>
| Newsgroups | gmane.comp.hardware.microcontrollers.tini |
|---|---|
| Message-ID | <[email protected]> |
Hello, After extended checks, it is still not possible to do a "ping" from my TINI to a PC or the reverse. I did check the data sheet as suggested by Tom : all jumpers seem to be in the good position ; I did try jumper 10 in both positions (10 Mbps or 100 Mbps) both home with a single PC and fixed IP adresses, and at my office, on the company's network, served by DHCP, with the help of the network administrator. The result is always the same : a led on the socket board is flikkering, telling that there is contact between the socket board and the network but it seems there is no network contact between the socket board and the TINI module. Notice that a ping from TINI on "localhost" or on the fixed adress of the module works well. When trying to get an adress from the DHCP server, the network administrator could see that the server did not receive any request from TINI. If you have an idee of what can be wrong, any help will be appreciated. Kind regards Alain -----Original Message----- From: Alain De Meyer [SMTP:[email protected]] Sent: vendredi, janvier 30, 2004 07:24 To: 'Tom Blough' Subject: RE: [TINI]help DSTINIM400 - no network ! Hello Tom, Thanks for answering so fast. I think that my ethernet card is a 10/100 and probably the PC is autosensing, so the ping from TINI to the PC should work ... and it doesn't. But as I have no better idea, I shall check the data sheet and do some additional tests this week end. I'll keep you informed. Thanks again Alain -----Original Message----- From: Tom Blough [SMTP:[email protected]] Sent: vendredi, janvier 30, 2004 05:07 To: Alain De Meyer; 'tini-6tN4nzCoH/[email protected]' Subject: RE: [TINI]help DSTINIM400 - no network ! Do you have a link light on the TINI? My guess is that you have a straight 100Mbps network you are connecting to as opposed to a 10/100 network. The TINI is not autosensing, you need to set the jumpers on the TINI for 100Mbps operation. Check the data sheet on the TINI website for details. Tom Blough -----Original Message----- From: Alain De Meyer [mailto:[email protected]] Sent: Friday, January 30, 2004 10:15 AM To: 'tini-6tN4nzCoH/[email protected]' Subject: [TINI]help DSTINIM400 - no network ! CONSIDER ALL ATTACHMENTS AND LINKS IN THIS EMAIL POTENTIALLY HARMFUL Do not open attachments unless they are from a known sender and are EXPECTED. If in doubt, call the sender before opening. **************************************************************** Hello, I just mounted my new DSTINIM400 module on a new DSTINIS400 socket. I did download tini1_12.zip to my PC and unzipped it. After making all connections ( power, serial 0 and network ), I did connect to the module with JavaKit -400 -flash 40 and loaded files tini_400.tbin and slush_400.tbin The loader seems to be OK : it reports : Welcome to the TINI DS80C400 Auto Boot Loader 1.0.1 Slush seems to be OK : it reports : TINI OS 1.12 - Copyright ...Welcome to slush After login as root, the IP adress of the module is set to 192.168.1.7 with subnet mask 255.255.255.0 The PC has adress 192.168.1.6 with mask 255.255.255.0 and is connected to the module via a crossed cable. ftp does not work, telnet does not work and even a ping does not work ( in either direction ). Pinging another PC ( instead of TINI ) with the same cable works, so the cable is OK and the network interface of the PC is OK. Any idee of what is wrong ? I really would apreciate your help. Thanks in advance. Alain --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.542 / Virus Database: 336 - Release Date: 11/18/03 _______________________________________________ TINI mailing list TINI-6tN4nzCoH/[email protected] To UNSUBSCRIBE, edit your profile, or see list archives: http://lists.dalsemi.com/mailman/listinfo/tini Spam_Failed:None **************************************************************** Royal Precision, Inc. http://www.royalprecision.com (860)489-9254 This email and any attachments are confidential and are intended solely for the use of the named addressee. If you have received this email in error please contact Royal Precision, Inc. **************************************************************** --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.542 / Virus Database: 336 - Release Date: 11/18/03 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.542 / Virus Database: 336 - Release Date: 11/18/03 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.542 / Virus Database: 336 - Release Date: 11/18/03 _______________________________________________ TINI mailing list TINI-6tN4nzCoH/[email protected] To UNSUBSCRIBE, edit your profile, or see list archives: http://lists.dalsemi.com/mailman/listinfo/tini